A simple method for power loss estimation in PWM inverter-fed motors

This paper presents a simple power loss estimation method for inverter-fed low power AC asynchronous and synchronous motors. The method uses a simulation based DC/AC converter power loss estimation based on datasheet parameters and load characteristics like measured phase resistance and current phase delay. A current control scheme is used to impose a constant current at various speeds. Using this approach both asynchronous and synchronous motors can be used as a load. Total power loss is measured as the DC Link current by an amperemeter avoiding the use of complicated measurement systems.

[1]  K. Yamazaki,et al.  Loss analysis of permanent-magnet motor considering carrier harmonics of PWM inverter using combination of 2-D and 3-D finite-element method , 2005, IEEE Transactions on Magnetics.

[2]  K. Yamazaki,et al.  Loss Investigation of Interior Permanent-Magnet Motors Considering Carrier Harmonics and Magnet Eddy Currents , 2009, IEEE Transactions on Industry Applications.

[3]  M.D. Swinney,et al.  IGBT and PN junction diode loss modeling for system simulations , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[4]  J. Marvin,et al.  Semiconductor power losses in AC inverters , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.

[5]  Michele Pastorelli,et al.  Influence of the inverter characteristics on the iron losses in PWM inverter fed induction motors , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.

[6]  P.L. Chapman,et al.  Optimal harmonic elimination control , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[7]  Rudolf Mecke.  Multilevel NPC inverter for low-voltage applications , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[8]  M. Chiampi,et al.  Rotor loss estimation in permanent magnet machines with concentrated windings , 2005, IEEE Transactions on Magnetics.

[9]  P. Krein,et al.  IGBT and Diode Loss Estimation Under Hysteresis Switching , 2012, IEEE Transactions on Power Electronics.

[10]  Xiangning He,et al.  Switching Loss Analysis and Modeling of Power Semiconductor Devices Base on an Automatic Measurement System , 2006, 2006 IEEE International Symposium on Industrial Electronics.

[11]  Andrea Cavagnino,et al.  Isolating the Impact of PWM Modulation on Motor Iron Losses , 2008, 2008 IEEE Industry Applications Society Annual Meeting.

[12]  Gonzalo Abad,et al.  Medium Voltage–High Power Converter Topologies Comparison Procedure, for a 6.6 kV Drive Application Using 4.5 kV IGBT Modules , 2012, IEEE Transactions on Industrial Electronics.

[13]  Wenping Cao,et al.  Predicting Inverter-Induced Harmonic Loss by Improved Harmonic Injection , 2008, IEEE Transactions on Power Electronics.

[14]  F. Blaabjerg,et al.  An extended model of power losses in hard-switched IGBT-inverters , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.