(AlCrMg)x(PO4)y/MgO composite: A new thermal protection and insulation material up to 2400 °C

[1]  Z. Yao,et al.  Multifunctional Ti3C2TX MXene/Aramid nanofiber/polyimide aerogels with efficient thermal insulation and tunable electromagnetic wave absorption performance under thermal environment , 2022, Composites Part B: Engineering.

[2]  Q. Yu,et al.  Effect of silica aerogel on thermal insulation and acoustic absorption of geopolymer foam composites: The role of aerogel particle size , 2022, Composites Part B: Engineering.

[3]  Lingchao Lu,et al.  Rheology control towards 3D printed magnesium potassium phosphate cement composites , 2022, Composites Part B: Engineering.

[4]  Shengzhuo Ge,et al.  Cogel Strategy for the Preparation of a "Thorn"-Like Porous Halloysite/Gelatin Composite Aerogel with Excellent Mechanical Properties and Thermal Insulation. , 2022, ACS applied materials & interfaces.

[5]  Xiaohuan Liu,et al.  Magnetic ZrO2/PEI/Fe3O4 functionalized MWCNTs composite with enhanced phosphate removal performance and easy separability , 2022, Composites Part B: Engineering.

[6]  C. Unluer,et al.  Influence of different additives on the rheology and microstructural development of MgO–SiO2 mixes , 2022, Composites Part B: Engineering.

[7]  M. Zhang,et al.  In-situ synthesized age-hardenable high-entropy composites with superior wear resistance , 2022, Composites Part B: Engineering.

[8]  P. Bagde,et al.  Effect of graphite addition on tribological behaviour of plasma sprayed Cr2O3-TiO2 coating , 2021, Materials Today: Proceedings.

[9]  Guoqun Zhao,et al.  Lightweight, strong, flame-retardant PVDF/PMMA microcellular foams for thermal insulation fabricated by supercritical CO2 foaming , 2021, Composites Part B: Engineering.

[10]  N. Goo,et al.  Advanced sandwich structures for thermal protection systems in hypersonic vehicles: A review , 2021, Composites Part B: Engineering.

[11]  Le Xie,et al.  Highly elastic and robust hydroxyapatite nanowires/polyimide composite aerogel with anisotropic structure for thermal insulation , 2021 .

[12]  Hejun Li,et al.  Effect of SiCnws on flexural strength of SiCf/HfC-SiC composites after impact and ablation , 2021 .

[13]  Q. Fu,et al.  Ablation and heat insulation performances of nose-shaped ZrC-C composites with gradient pore structure , 2021 .

[14]  Liwei Yan,et al.  Ordered graphitized ceramic layer induced by liquid crystal epoxy resin in silicone rubber composites with enhanced ablation resistance performance , 2021 .

[15]  K. Su,et al.  Effect of Al(H2PO4)3/Zn/B4C doped resin on properties and microstructure of unfired Al2O3–C slide plate materials , 2021, Ceramics International.

[16]  Yu-Zhong Wang,et al.  Temperature-Responsive Intumescent Chemistry toward Fire Resistance and Super Thermal Insulation under Extremely Harsh Conditions , 2021, Chemistry of Materials.

[17]  K. MacKenzie,et al.  Functionalization of nano-MgCr2O4 additives by silanol groups: a new approach to the development of magnesia-chrome refractories , 2021, Ceramics International.

[18]  Qizhong Huang,et al.  Ablation behavior of (Zr,Ta)B2-SiC coating on carbon/carbon composites at 2300 °C , 2021 .

[19]  S. Dong,et al.  Multi-cycle and long-term ablation behavior of Cf/ZrB2-SiC composites at 2500 °C , 2021 .

[20]  Pingan Song,et al.  Mechanical and thermal properties of PEEK composites by incorporating inorganic particles modified phosphates , 2021 .

[21]  Chunfeng Hu,et al.  Ablation behavior and mechanism of bulk MoAlB ceramic at ∼1670-2550 °C in air plasma flame , 2021 .

[22]  Jianguo Jiang,et al.  Review on potential uses, cementing process, mechanism and syntheses of phosphate cementitious materials by the microbial mineralization method , 2021 .

[23]  Chenguang Huang,et al.  Laser ablation behavior of C/SiC composites subjected to transverse hypersonic airflow , 2021 .

[24]  M. Sheikh,et al.  Mechanical properties of fiber and nano-Al2O3 reinforced magnesium phosphate cement composite , 2021 .

[25]  Wei Liu,et al.  An efficient graphene oxide reinforced aluminum phosphate/Cr2O3 double coating as an enhanced tritium permeation barrier , 2021 .

[26]  B. Ding,et al.  Ultrastrong, Superelastic, and Lamellar Multiarch Structured ZrO2-Al2O3 Nanofibrous Aerogels with High-Temperature Resistance over 1300 °C. , 2020, ACS nano.

[27]  Shuang Hu,et al.  Polymer-based ceramifiable composites for flame retardant applications: A review , 2020 .

[28]  Zhiwei Luo,et al.  Characterization of structure and properties of MgO-Al2O3-SiO2-B2O3-Cr2O3 glass-ceramics , 2020 .

[29]  Shuang Wang,et al.  Effects of SiC content on mechanical, thermal and ablative properties of carbon/phenolic composites , 2020 .

[30]  Haodong Liu,et al.  Promoted ablation resistance of polydimethylsiloxane via crosslinking with multi-ethoxy POSS , 2020 .

[31]  B. Lothenbach,et al.  Influence of wollastonite on hydration and properties of magnesium potassium phosphate cements , 2020 .

[32]  Tingting Xu,et al.  Ultralight and Hydrophobic Palygorskite-based Aerogels with Prominent Thermal Insulation and Flame Retardancy. , 2020, ACS Applied Materials and Interfaces.

[33]  A. Nourbakhsh,et al.  A comparison of the effect of nanostructured MgCr2O4 and FeCr2O4 additions on the microstructure and mechanical properties of direct-bonded magnesia-chrome refractories , 2020 .

[34]  Wei Sun,et al.  Properties of −O–Cu–O– Bridged Copper Phosphate-Based Thermal Insulation Materials , 2019, ACS omega.

[35]  B. Zhang,et al.  Corrosion mechanisms of magnesia-chrome refractories in copper slag and concurrent formation of hexavalent chromium , 2019, Journal of Alloys and Compounds.

[36]  Zhonggang Wang,et al.  Experimental investigation on bending behavior of honeycomb sandwich panel with ceramic tile face-sheet , 2019, Composites Part B: Engineering.

[37]  Mingchao Wang,et al.  An engineering ceramic-used high-temperature-resistant inorganic phosphate-based adhesive self-reinforced by in-situ growth of mullite whiskers , 2019, Journal of the European Ceramic Society.

[38]  Yongguang Wang,et al.  Anti-corrosion performance of chemically bonded phosphate ceramic coatings reinforced by nano-TiO2. , 2018, Journal of the mechanical behavior of biomedical materials.

[39]  D. Lambertin,et al.  Influence of the w/c ratio on the hydration process of a magnesium phosphate cement and on its retardation by boric acid , 2018, Cement and Concrete Research.

[40]  Mingchao Wang,et al.  A heat-resistant glass-modified multi-component phosphate adhesive for repair and connection of superalloy in extreme environment , 2018 .

[41]  Jichuan Huo,et al.  Preparation and properties of in-situ mullite whiskers reinforced aluminum chromium phosphate wave-transparent ceramics , 2017 .

[42]  Huisu Chen,et al.  Hydration behavior of magnesium potassium phosphate cement and stability analysis of its hydration products through thermodynamic modeling , 2017 .

[43]  J. Zou,et al.  Thermoablative resistance of ZrB 2 -SiC-WC ceramics at 2400 °C , 2017 .

[44]  T. Fisher,et al.  Flyweight 3D Graphene Scaffolds with Microinterface Barrier-Derived Tunable Thermal Insulation and Flame Retardancy. , 2017, ACS applied materials & interfaces.

[45]  De’an Yang,et al.  Fabrication and properties of thermal insulating material using hollow glass microspheres bonded by aluminum–chrome–phosphate and tetraethyl orthosilicate , 2016 .

[46]  Wei Sun,et al.  Microstructure and ablation behavior of carbon/carbon composites infiltrated with Zr–Ti , 2013 .

[47]  Z. Chao,et al.  Synthesis of mesoporous chromium aluminophosphate (CrAlPO) via solid state reaction at low temperature , 2012, Journal of Wuhan University of Technology-Mater. Sci. Ed..

[48]  H. Hahn,et al.  Chemically bonded phosphate ceramics composites reinforced with graphite nanoplatelets , 2011 .

[49]  X. Xiong,et al.  Ablation behaviors of carbon/carbon composites with C-SiC-TaC multi-interlayers , 2009 .

[50]  Jiang Chang,et al.  Synthesis of nanocrystalline wollastonite powders by citrate-nitrate gel combustion method , 2009 .

[51]  G. Marcì,et al.  Citrate-nitrate auto-combustion synthesis of perovskite-type nanopowders: A systematic approach , 2009 .

[52]  H. Wang,et al.  Influence of chrome-bearing sols vacuum impregnation on the properties of magnesia-chrome refractory , 2008 .

[53]  S. Das,et al.  Effect of MgO and ZrO2 additions on the properties of magnesite-chrome composite refractory , 2007 .

[54]  Dong‐Pyo Kim,et al.  Development of Cr-free aluminum phosphate binders and their composite applications , 2007 .

[55]  Chao Zou,et al.  Phase Evolution of Aluminum-Chromium-Phosphate Binders during Heat-Treatment , 2007 .

[56]  Akira Yamaguchi,et al.  Oxidation kinetics of MgO–C refractory bricks , 2002 .

[57]  H. O’Neill,et al.  Crystal structures and cation distributions in simple spinels from powder XRD structural refinements: MgCr2O4, ZnCr2O4, Fe3O4 and the temperature dependence of the cation distribution in ZnAl2O4 , 1994 .

[58]  J. Green.  Calcination of precipitated Mg(OH)2 to active MgO in the production of refractory and chemical grade MgO , 1983 .

[59]  J. P. Remeika,et al.  Chromium dioxide: High pressure synthesis and bond lengths , 1972 .