The calibration of material properties for use in discrete element models

[1]  W. Yan,et al.  Effects of Particle Shape and Microstructure on Strength and Dilatancy During a Numerical Direct Shear Test , 2008 .

[2]  Peter W Wypych,et al.  Validation of particle flow through a conveyor transfer spoon via particle velocity analysis , 2008 .

[3]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[4]  Jeoung Seok Yoon,et al.  Application of experimental design and optimization to PFC model calibration in uniaxial compression simulation , 2007 .

[5]  E. Alonso,et al.  Considerations of the dilatancy angle in rocks and rock masses , 2005 .

[6]  De’an Sun,et al.  On the interface friction in direct shear test | NOVA. The University of Newcastle's Digital Repository , 2005 .

[7]  Harald Kruggel-Emden,et al.  A study on the validity of the multi-sphere Discrete Element Method , 2008 .

[8]  Jörg Schwedes,et al.  Review on testers for measuring flow properties of bulk solids , 2003 .

[9]  André Katterfeld,et al.  On the numerical calibration of discrete element models for the simulation of bulk solids , 2006 .

[10]  K. Malone,et al.  Determination of contact parameters for discrete element method simulations of granular systems , 2008 .

[11]  Hiroshi Nakashima,et al.  Determining the angle of repose of sand under low-gravity conditions using discrete element method , 2011 .

[12]  David Curry,et al.  A systematic approach to DEM material model calibration , 2009 .

[13]  D. Els,et al.  Calibration of granular material parameters for DEM modelling and numerical verification by blade-granular material interaction. , 2009 .

[14]  R. J. Berry,et al.  Comparison between the angles of wall friction measured on an on-line wall friction tester and the Jenike wall friction tester , 2007 .

[15]  Melinda A. Miller,et al.  Statistical Methods for Engineers , 1984, Technometrics.

[16]  C. J. Coetzee,et al.  Forced granular flow , 2000 .

[17]  John W. Carson,et al.  Development of an international standard for shear testing , 2006 .

[18]  W. Yan.  Fabric evolution in a numerical direct shear test , 2009 .

[19]  Graeme Francois Dryden Dymond.  Creation, optimization and verification of a three dimensional numerical model to simulate a dragline bucket during the digging cycle using modern DEM software , 2007 .

[20]  C. J. Coetzee,et al.  Discrete element parameter calibration and the modelling of dragline bucket filling , 2010 .

[21]  Catherine O'Sullivan,et al.  Application of Taguchi methods to DEM calibration of bonded agglomerates , 2011 .

[22]  R. J. Del Vecchio.  Understanding Design of Experiments , 2014 .

[23]  Pieter A. Vermeer,et al.  Discrete and continuum modelling of excavator bucket filling , 2007 .

[24]  Sangseom Jeong,et al.  Shear characteristics of coarse aggregates sourced from quarries , 2009 .

[25]  Paul Zulli,et al.  An experimental and numerical study of the angle of repose of coarse spheres , 2002 .

[26]  Göran Frenning,et al.  An efficient finite/discrete element procedure for simulating compression of 3D particle assemblies , 2008 .

[27]  J. Ooi,et al.  Experiments and simulations of direct shear tests: porosity, contact friction and bulk friction , 2008 .

[28]  K. H. Head,et al.  Manual of soil laboratory testing , 1980 .

[29]  Shinroku Matsuzaki,et al.  Speed-up of computing time for numerical analysis of particle charging process by using discrete element method , 2009 .

[30]  Richard J. Cleary,et al.  Statistical Methods for Engineers , 1999 .

[31]  Klein E. Ileleji,et al.  The angle of repose of bulk corn stover particles , 2008 .