X-ray computed tomography

[1]  V. Cnudde,et al.  Spectral X‐ray computed micro tomography: 3‐dimensional chemical imaging , 2020, X-Ray Spectrometry.

[2]  A. Fatemi,et al.  Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review , 2020 .

[3]  A. du Plessis,et al.  Hot isostatic pressing in metal additive manufacturing: X-ray tomography reveals details of pore closure , 2020 .

[4]  C. David,et al.  Pushing the temporal resolution in absorption and Zernike phase contrast nanotomography: enabling fast in situ experiments , 2020, Journal of synchrotron radiation.

[5]  D. Neely,et al.  Application of compact laser-driven accelerator X-ray sources for industrial imaging , 2020, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment.

[6]  D. Parkinson,et al.  Quantitative and qualitative bone imaging: A review of synchrotron radiation microtomography analysis in bone research. , 2020, Journal of the mechanical behavior of biomedical materials.

[7]  Arash Rabbani,et al.  Pore system characteristics of soil aggregates and their relevance to aggregate stability , 2020, Geoderma.

[8]  M. Guizar‐Sicairos,et al.  Validation study of small-angle X-ray scattering tensor tomography , 2020, Journal of synchrotron radiation.

[9]  Tim Salditt,et al.  A phase-retrieval toolbox for X-ray holography and tomography , 2020, Journal of synchrotron radiation.

[10]  P. Withers,et al.  X-ray computed tomography in life sciences , 2020, BMC Biology.

[11]  A. Peele,et al.  Propagation-Based Phase-Contrast CT of the Breast Demonstrates Higher Quality Than Conventional Absorption-Based CT Even at Lower Radiation Dose. , 2020, Academic radiology.

[12]  Djordje Vukelic,et al.  Improved surface extraction of multi-material components for single-source industrial X-ray computed tomography , 2020 .

[13]  V. Cnudde,et al.  Pore‐Scale Visualization and Quantification of Transient Solute Transport Using Fast Microcomputed Tomography , 2019, Water Resources Research.

[14]  Herminso Villarraga-Gómez,et al.  X-ray computed tomography: from medical imaging to dimensional metrology , 2019, Precision Engineering.

[15]  F. Marone,et al.  A general model for welding of ash particles in volcanic systems validated using in situ X-ray tomography , 2019, Earth and Planetary Science Letters.

[16]  E. Liu,et al.  Effects of uniaxial and triaxial compression tests on the frozen sandstone combining with CT scanning , 2019, International Journal of Physical Modelling in Geotechnics.

[17]  John Banhart,et al.  Using X-ray tomoscopy to explore the dynamics of foaming metal , 2019, Nature Communications.

[18]  M. Andrew,et al.  Non-destructive three-dimensional crystallographic orientation analysis of olivine using laboratory diffraction contrast tomography , 2019, Mineralogical Magazine.

[19]  H. Vogel,et al.  Impact of wetting and drying cycles on soil structure dynamics , 2019, Geoderma.

[20]  Snehasis Chakraborty,et al.  Functional whole wheat breads: Compelling internal architecture , 2019, LWT.

[21]  T L Burnett,et al.  Completing the picture through correlative characterization , 2019, Nature Materials.

[22]  P. Withers,et al.  Experimental steering of electron microscopy studies using prior X-ray computed tomography , 2019, Ultramicroscopy.

[23]  Francesco De Carlo,et al.  Computational 3D histological phenotyping of whole zebrafish by X-ray histotomography , 2019, eLife.

[24]  P. Verboven,et al.  Effect of dynamic storage temperatures on the microstructure of frozen carrot imaged using X-ray micro-CT , 2019, Journal of Food Engineering.

[25]  Chris Broeckhoven,et al.  Looking deep into nature: A review of micro-computed tomography in biomimicry. , 2019, Acta biomaterialia.

[26]  Franz Pfeiffer,et al.  Assessment of intraductal carcinoma in situ (DCIS) using grating-based X-ray phase-contrast CT at conventional X-ray sources: An experimental ex-vivo study , 2019, PloS one.

[27]  Stéphane Roux,et al.  Fast four-dimensional tensile test monitored via X-ray computed tomography: Elastoplastic identification from radiographs , 2019, The Journal of Strain Analysis for Engineering Design.

[28]  Dave Clarke,et al.  The Weevil Fauna Preserved in Burmese Amber—Snapshot of a Unique, Extinct Lineage (Coleoptera: Curculionoidea) , 2018, Diversity.

[29]  Andreas Kopmann,et al.  Parasitoid biology preserved in mineralized fossils , 2018, Nature Communications.

[30]  Matthew Andrew,et al.  A quantified study of segmentation techniques on synthetic geological XRM and FIB-SEM images , 2018, Computational Geosciences.

[31]  Nghia T. Vo,et al.  Crystallisation in basaltic magmas revealed via in situ 4D synchrotron X-ray microtomography , 2018, Scientific Reports.

[32]  Guido Tosello,et al.  Comparison of surface extraction techniques performance in computed tomography for 3D complex micro-geometry dimensional measurements , 2018 .

[33]  M. Prokop,et al.  Can virtual autopsy with postmortem CT improve clinical diagnosis of cause of death? A retrospective observational cohort study in a Dutch tertiary referral centre , 2018, BMJ Open.

[34]  Nghia T. Vo,et al.  Thermal Runaway: Identifying the Cause of Rupture of Li‐Ion Batteries during Thermal Runaway (Adv. Sci. 1/2018) , 2018, Advanced Science.

[35]  Jan Sijbers,et al.  Iterative Reconstruction Methods in X-ray CT , 2017 .

[36]  T. Gureyev,et al.  CT dose reduction factors in the thousands using X-ray phase contrast , 2017, Scientific Reports.

[37]  Philip J. Withers,et al.  The quantification of impact damage distribution in composite laminates by analysis of X-ray computed tomograms , 2017 .

[38]  P. Withers,et al.  X-ray computed tomography of polymer composites , 2017 .

[39]  N. Fraser,et al.  Terrestrial Conservation Lagerstätten: Windows into the Evolution of Life on Land , 2017 .

[40]  P. Prangnell,et al.  The Influence of Porosity on Fatigue Crack Initiation in Additively Manufactured Titanium Components , 2017, Scientific Reports.

[41]  J. Wallentin,et al.  Simulated sample heating from a nanofocused X-ray beam , 2017, Journal of synchrotron radiation.

[42]  A. Obaton,et al.  In vivo XCT bone characterization of lattice structured implants fabricated by additive manufacturing , 2017, Heliyon.

[43]  P. Pietsch,et al.  X-Ray Tomography for Lithium Ion Battery Research: A Practical Guide , 2017 .

[44]  M. Wicklein,et al.  Age estimation during the blow fly intra-puparial period: a qualitative and quantitative approach using micro-computed tomography , 2017, International Journal of Legal Medicine.

[45]  C. Broeckhoven,et al.  Beauty is more than skin deep: a non‐invasive protocol for in vivo anatomical study using micro‐CT , 2017 .

[46]  Bram van Ginneken,et al.  A survey on deep learning in medical image analysis , 2017, Medical Image Anal..

[47]  Stuart R. Stock,et al.  Concurrent determination of nanocrystal shape and amorphous phases in complex materials by diffraction scattering computed tomography , 2017 .

[48]  I. Robinson,et al.  3D X-Ray Nanotomography of Cells Grown on Electrospun Scaffolds. , 2017, Macromolecular bioscience.

[49]  K. Jefimovs,et al.  Dual phase grating interferometer for tunable dark-field sensitivity , 2017 .

[50]  Bob Liu,et al.  Dosimetry in Micro-computed Tomography: a Review of the Measurement Methods, Impacts, and Characterization of the Quantum GX Imaging System , 2016, Molecular Imaging and Biology.

[51]  J. Jakubek,et al.  Dual energy CT inspection of a carbon fibre reinforced plastic composite combined with metal components , 2016 .

[52]  Markus Bartscher,et al.  ISO test survey on material influence in dimensional computed tomography , 2016 .

[53]  P. Prangnell,et al.  Porosity Regrowth During Heat Treatment of Hot Isostatically Pressed Additively Manufactured Titanium Components , 2016 .

[54]  R. Racicot.  FOSSIL SECRETS REVEALED: X-RAY CT SCANNING AND APPLICATIONS IN PALEONTOLOGY , 2016 .

[55]  Michala K Stock,et al.  The Utility of Advanced Imaging in Forensic Anthropology , 2016, Academic forensic pathology.

[56]  Alan Lyon,et al.  Novel, High Brightness X-ray Source and High Efficiency X-ray Optic for Development of X-ray Instrumentation , 2016, Microscopy and Microanalysis.

[57]  E. Maire,et al.  In-situ X-ray tomographic monitoring of gypsum plaster setting , 2016 .

[58]  Tim Salditt,et al.  Propagation-based phase-contrast tomography for high-resolution lung imaging with laboratory sources , 2016 .

[59]  D. Grimaldi,et al.  Mid-Cretaceous amber fossils illuminate the past diversity of tropical lizards , 2016, Science Advances.

[60]  Achim H. Schwermann,et al.  Preservation of three-dimensional anatomy in phosphatized fossil arthropods enriches evolutionary inference , 2016, eLife.

[61]  Stuart R. Stock,et al.  Diffraction tomography and Rietveld refinement of a hydroxyapatite bone phantom , 2016 .

[62]  Andreas Mortensen,et al.  20 Hz X-ray tomography during an in situ tensile test , 2016, International Journal of Fracture.

[63]  Philip J. Withers,et al.  Towards in-process x-ray CT for dimensional metrology , 2016 .

[64]  O. Arthurs,et al.  Clinical utility of postmortem microcomputed tomography of the fetal heart: diagnostic imaging vs macroscopic dissection , 2016, Ultrasound in obstetrics & gynecology : the official journal of the International Society of Ultrasound in Obstetrics and Gynecology.

[65]  David S. Eastwood,et al.  Quantifying Bulk Electrode Strain and Material Displacement within Lithium Batteries via High‐Speed Operando Tomography and Digital Volume Correlation , 2015, Advanced science.

[66]  Veerle Cnudde,et al.  Characterization of composition and structure of clay minerals in sandstone with ptychographic X-ray nanotomography , 2015 .

[67]  Stuart R. Stock,et al.  Diffraction scattering computed tomography: a window into the structures of complex nanomaterials. , 2015, Nanoscale.

[68]  P. Withers,et al.  3D chemical imaging in the laboratory by hyperspectral X-ray computed tomography , 2015, Scientific Reports.

[69]  Joel G Fletcher,et al.  Answers to Common Questions About the Use and Safety of CT Scans. , 2015, Mayo Clinic proceedings.

[70]  P. Verboven,et al.  Spatial development of transport structures in apple (Malus × domestica Borkh.) fruit , 2015, Front. Plant Sci..

[71]  Wim Dewulf,et al.  Towards geometrical calibration of x-ray computed tomography systems—a review , 2015 .

[72]  J. Losos,et al.  Amber fossils demonstrate deep-time stability of Caribbean lizard communities , 2015, Proceedings of the National Academy of Sciences.

[73]  E. Maire,et al.  A Multi-Scale Investigation of Pore Structure Impact on the Mobilization of Trapped Oil by Surfactant Injection , 2015, Transport in Porous Media.

[74]  M. De Graef,et al.  The Three-Dimensional Morphology of Growing Dendrites , 2015, Scientific Reports.

[75]  Ziyu Wu,et al.  Quantitative phase retrieval in X-ray Zernike phase contrast microscopy. , 2015, Journal of synchrotron radiation.

[76]  Charles A. Bouman,et al.  TIMBIR: A Method for Time-Space Reconstruction From Interlaced Views , 2015, IEEE Transactions on Computational Imaging.

[77]  James B. Robinson,et al.  In-operando high-speed tomography of lithium-ion batteries during thermal runaway , 2015, Nature Communications.

[78]  William R B Lionheart,et al.  Diffraction tomography of strain , 2015 .

[79]  Claudia Borri,et al.  Metal and motion artifacts by cone beam computed tomography (CBCT) in dental and maxillofacial study , 2015, La radiologia medica.

[80]  D. Dimiduk,et al.  New opportunities for quantitative tracking of polycrystal responses in three dimensions , 2014 .

[81]  G. Cattoretti,et al.  OP22.06: Postmortem micro‐computed tomography (micro‐CT) of small fetuses and hearts , 2014 .

[82]  Adrian Sheppard,et al.  Imaged-based multiscale network modelling of microporosity in carbonates , 2014 .

[83]  Frank Härtig,et al.  Procedure and reference standard to determine the structural resolution in coordinate metrology , 2014 .

[84]  Jiajun Wang,et al.  In situ three-dimensional synchrotron X-Ray nanotomography of the (de)lithiation processes in tin anodes. , 2014, Angewandte Chemie.

[85]  S. Haigh,et al.  Correlative Tomography , 2014, Scientific Reports.

[86]  T E Gureyev,et al.  On the evolution and relative merits of hard X-ray phase-contrast imaging methods , 2014, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[87]  H. Krapp,et al.  In Vivo Time-Resolved Microtomography Reveals the Mechanics of the Blowfly Flight Motor , 2014, PLoS biology.

[88]  R. Mark Henkelman,et al.  Structural Stabilization of Tissue for Embryo Phenotyping Using Micro-CT with Iodine Staining , 2013, PloS one.

[89]  Marco Stampanoni,et al.  Visualization and Quantification of Electrochemical and Mechanical Degradation in Li Ion Batteries , 2013, Science.

[90]  M. Suéry,et al.  Internal melting and coarsening of liquid droplets in an Al–Cu alloy: a 4-D experimental study , 2013, Journal of Materials Science.

[91]  Philip J. Withers,et al.  Metamorphosis revealed: time-lapse three-dimensional imaging inside a living chrysalis , 2013, Journal of The Royal Society Interface.

[92]  E. Maire,et al.  In situ observation of syntactic foams under hydrostatic pressure using X-ray tomography , 2013 .

[93]  Alessandro Olivo,et al.  A simplified approach to quantitative coded aperture X-ray phase imaging. , 2013, Optics express.

[94]  Sarah Faulwetter,et al.  Micro-computed tomography: Introducing new dimensions to taxonomy , 2013, ZooKeys.

[95]  Paola Coan,et al.  X-ray phase-contrast imaging: from pre-clinical applications towards clinics , 2013, Physics in medicine and biology.

[96]  M. Preuss,et al.  Fatigue and Damage in Structural Materials Studied by X-Ray Tomography , 2012 .

[97]  E. Maire.  X-Ray Tomography Applied to the Characterization of Highly Porous Materials , 2012 .

[98]  David Penney,et al.  A minute fossil phoretic mite recovered by phase-contrast X-ray computed tomography , 2012, Biology Letters.

[99]  F. Boas,et al.  CT artifacts: Causes and reduction techniques , 2012 .

[100]  Veerle Cnudde,et al.  High‐resolution X‐ray CT for 3D petrography of ferruginous sandstone for an investigation of building stone decay , 2011, Microscopy research and technique.

[101]  E. Boller,et al.  Three-dimensional rigid multiphase networks providing high-temperature strength to cast AlSi10Cu5Ni1-2 piston alloys , 2011, Acta materialia.

[102]  Eve Donnelly,et al.  Methods for Assessing Bone Quality: A Review , 2011, Clinical orthopaedics and related research.

[103]  Anna Burvall,et al.  Phase Retrieval in X-ray Phase-contrast Imaging Suitable for Tomography , 2022 .

[104]  Philip J. Withers,et al.  Computed tomography recovers data from historical amber: an example from huntsman spiders , 2011, Naturwissenschaften.

[105]  Rainer Raupach,et al.  Analytical evaluation of the signal and noise propagation in x-ray differential phase-contrast computed tomography , 2011, Physics in medicine and biology.

[106]  A. Rollett,et al.  Fast fourier transform-based modeling for the determination of micromechanical fields in polycrystals , 2011 .

[107]  Veerle Cnudde,et al.  Three-dimensional phase separation and identification in granite , 2011 .

[108]  Veerle Cnudde,et al.  3D characterization of sandstone by means of X-ray computed tomography , 2011 .

[109]  P J Withers,et al.  Region‐of‐interest tomography using filtered backprojection: assessing the practical limits , 2011, Journal of microscopy.

[110]  Sandra J Shefelbine,et al.  BoneJ: Free and extensible bone image analysis in ImageJ. , 2010, Bone.

[111]  C. Jacobsen,et al.  Zernike phase contrast in scanning microscopy with X-rays. , 2010, Nature physics.

[112]  O. Bunk,et al.  Ptychographic X-ray computed tomography at the nanoscale , 2010, Nature.

[113]  D. Inzé,et al.  Plant structure visualization by high-resolution X-ray computed tomography. , 2010, Trends in plant science.

[114]  R. Nelson,et al.  Dual-energy multidetector CT: how does it work, what can it tell us, and when can we use it in abdominopelvic imaging? , 2010, Radiographics : a review publication of the Radiological Society of North America, Inc.

[115]  M. P. Morigi,et al.  Application of X-ray Computed Tomography to Cultural Heritage diagnostics , 2010 .

[116]  E. Maire,et al.  Metastable and unstable cellular solidification of colloidal suspensions. , 2009, Nature materials.

[117]  Cnudde Veerle,et al.  Multi-disciplinary characterisation of a sandstone surface crust. , 2009, The Science of the total environment.

[118]  W. Sellers,et al.  Biomechanics of Dromaeosaurid Dinosaur Claws: Application of X‐Ray Microtomography, Nanoindentation, and Finite Element Analysis , 2009, Anatomical record.

[119]  Philip J. Withers,et al.  Image stitching strategies for tomographic imaging of large objects at high resolution at synchrotron sources , 2009 .

[120]  Christophe L. Martin,et al.  Investigation of the Sintering of Heterogeneous Powder Systems by Synchrotron Microtomography and Discrete Element Simulation , 2009 .

[121]  B. Metscher.  MicroCT for comparative morphology: simple staining methods allow high-contrast 3D imaging of diverse non-mineralized animal tissues , 2009, BMC Physiology.

[122]  L Van Hoorebeke,et al.  Virtual histology by means of high‐resolution X‐ray CT , 2008, Journal of microscopy.

[123]  W. Ludwig,et al.  Observations of Intergranular Stress Corrosion Cracking in a Grain-Mapped Polycrystal , 2008, Science.

[124]  Kentaro Uesugi,et al.  High-density three-dimensional mapping of internal strain by tracking microstructural features , 2008 .

[125]  U. Vogt,et al.  Compact Zernike phase contrast x-ray microscopy using a single-element optic. , 2008, Optics letters.

[126]  Anne Sakdinawat,et al.  Phase contrast soft x-ray microscopy using Zernike zone plates. , 2008, Optics Express.

[127]  S. Roux,et al.  Three dimensional image correlation from X-Ray computed tomography of solid foam , 2007, 0712.2642.

[128]  D. Martill,et al.  The Crato Fossil Beds of Brazil: Window into an Ancient World , 2007 .

[129]  Wolfgang Ludwig,et al.  Fast X-ray tomography and acoustic emission study of damage in metals during continuous tensile tests , 2007 .

[130]  V. Cnudde,et al.  Software tools for quantification of X-ray microtomography at the UGCT , 2007 .

[131]  R. Speller,et al.  A coded-aperture technique allowing x-ray phase contrast imaging with conventional sources , 2007 .

[132]  Gioacchino Viggiani,et al.  Volumetric Digital Image Correlation Applied to X‐ray Microtomography Images from Triaxial Compression Tests on Argillaceous Rock , 2007 .

[133]  M P Akhter,et al.  Transmenopausal changes in the trabecular bone structure. , 2007, Bone.

[134]  Francesco De Carlo,et al.  Practical error estimation in zoom-in and truncated tomography reconstructions. , 2007, The Review of scientific instruments.

[135]  Peter Mygind Leth,et al.  The use of CT scanning in forensic autopsy , 2007, Forensic science, medicine, and pathology.

[136]  Veerle Cnudde,et al.  Description of a new fossil Pseudogarypus (Pseudoscorpiones: Pseudogarypidae) with the use of X-ray micro-CT to penetrate opaque amber , 2006 .

[137]  Paul M. Choate,et al.  Evolution of the Insects , 2006 .

[138]  Mark L. Rivers,et al.  Quantitative 3D petrography using x-ray tomography: Application to Bishop Tuff pumice clasts ☆ , 2006 .

[139]  K.,et al.  Quantitative assessment of microstructure and its effects on compression behavior of aluminum foams via high-resolution synchrotron X-ray tomography , 2006 .

[140]  Richard A. Ketcham,et al.  Computational methods for quantitative analysis of three-dimensional features in geological specimens , 2005 .

[141]  E. Paparozzi.  Plant Resins---Chemistry, Evolution Ecology and Ethnobotany , 2005 .

[142]  Julia F. Barrett,et al.  Artifacts in CT: recognition and avoidance. , 2004, Radiographics : a review publication of the Radiological Society of North America, Inc.

[143]  Larry L. Hench,et al.  Analysis of pore interconnectivity in bioactive glass foams using X-ray microtomography , 2004 .

[144]  P. Cloetens,et al.  Synchrotron X-Ray Microtomographic Investigation of Mineral Concentrations at Micrometre Scale in Sound and Carious Enamel , 2004, Caries Research.

[145]  Ian Sinclair,et al.  In situ high resolution synchrotron x-ray tomography of fatigue crack closure micromechanisms , 2004 .

[146]  Adrian Sheppard,et al.  Techniques for image enhancement and segmentation of tomographic images of porous materials , 2004 .

[147]  C. David,et al.  Differential x-ray phase contrast imaging using a shearing interferometer , 2002 .

[148]  S. Wilkins,et al.  Simultaneous phase and amplitude extraction from a single defocused image of a homogeneous object , 2002, Journal of microscopy.

[149]  Wenge Yang,et al.  Three-dimensional X-ray structural microscopy with submicrometre resolution , 2002, Nature.

[150]  D. Juul Jensen,et al.  Three-dimensional maps of grain boundaries and the stress state of individual grains in polycrystals and powders , 2001 .

[151]  E. Maire,et al.  Experimental study of porosity and its relation to fatigue mechanisms of model Al–Si7–Mg0.3 cast Al alloys , 2001 .

[152]  P. Cloetens,et al.  Holotomography: Quantitative phase tomography with micrometer resolution using hard synchrotron radiation x rays , 1999 .

[153]  B. Bay,et al.  Digital volume correlation: Three-dimensional strain mapping using X-ray tomography , 1999 .

[154]  J. Zhou,et al.  X-ray computed laminography: an approach of computed tomography for applications with limited access , 1999 .

[155]  G. Schneider,et al.  Cryo X-ray microscopy with high spatial resolution in amplitude and phase contrast. , 1998, Ultramicroscopy.

[156]  P. Rüegsegger,et al.  Morphometric analysis of human bone biopsies: a quantitative structural comparison of histological sections and micro-computed tomography. , 1998, Bone.

[157]  J. Kinney,et al.  Pore geometry in woven fiber structures: 0°/90° plain-weave cloth layup preform , 1998 .

[158]  R. Evershed,et al.  Chemical preservation of plants and insects in natural resins , 1998, Proceedings of the Royal Society of London. Series B: Biological Sciences.

[159]  Graham R. Davis,et al.  X-ray microtomography scanner using time-delay integration for elimination of ring artefacts in the reconstructed image , 1997 .

[160]  R. Geise.  Computed Tomography: Physical Principles, Clinical Applications, and Quality Control , 1995 .

[161]  Gerd Schneider,et al.  Phase contrast studies of biological specimens with the x‐ray microscope at BESSY (invited) , 1995 .

[162]  B. L. Henke,et al.  X-Ray Interactions: Photoabsorption, Scattering, Transmission, and Reflection at E = 50-30,000 eV, Z = 1-92 , 1993 .

[163]  Stuart R. Stock,et al.  Nondestructive investigation of damage in composites using x-ray tomographic microscopy (XTM) , 1990 .

[164]  P. Bjorkholm,et al.  Xenon as a contrast agent for imaging of the airways and lungs using digital radiography. , 1982, Radiology.

[165]  A. Lindgren,et al.  Sampling the 2-D Radon transform , 1981 .

[166]  G. N. Ramachandran,et al.  Three-dimensional reconstruction from radiographs and electron micrographs: application of convolutions instead of Fourier transforms. , 1971, Proceedings of the National Academy of Sciences of the United States of America.

[167]  D. DeRosier,et al.  The reconstruction of a three-dimensional structure from projections and its application to electron microscopy , 1970, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[168]  C. Broeckhoven,et al.  X-ray microtomography in herpetological research: a review , 2018 .

[169]  Wim Dewulf,et al.  Enhanced dimensional measurement by fast determination and compensation of geometrical misalignments of X-ray computed tomography instruments , 2018 .

[170]  Paul J. Williams,et al.  X-ray micro-computed tomography (μCT) for non-destructive characterisation of food microstructure , 2016 .

[171]  Robert S. Bradley,et al.  Yield behavior beneath hardness indentations in ductile metals, measured by three-dimensional computed X-ray tomography and digital volume correlation , 2015 .

[172]  L. De Chiffre,et al.  Comparison on Computed Tomography using industrial items , 2014 .

[173]  Irwin R. Donis-González,et al.  Internal characterisation of fresh agricultural products using traditional and ultrafast electron beam X-ray computed tomography imaging☆ , 2014 .

[174]  Robert Schmitt,et al.  Industrial applications of computed tomography , 2014 .

[175]  R. Ritchie,et al.  Real-Time Quantitative Imaging of Failure Events in Materials under Load at Temperatures above 1700°C , 2012 .

[176]  S. Carmignato,et al.  Accuracy of industrial computed tomography measurements: Experimental results from an international comparison , 2012 .

[177]  Michael Herbig,et al.  3-D growth of a short fatigue crack within a polycrystalline microstructure studied using combined diffraction and phase-contrast X-ray tomography , 2011 .

[178]  Neeraj Seth,et al.  X-ray imaging methods for internal quality evaluation of agricultural produce , 2011, Journal of Food Science and Technology.

[179]  Xiangqian Jiang,et al.  Multisensor data fusion in dimensional metrology , 2009 .

[180]  Andrew King,et al.  X-ray diffraction contrast tomography: a novel technique for three-dimensional grain mapping of polycrystals. II. The combined case , 2008 .

[181]  Bülent Sankur,et al.  Survey over image thresholding techniques and quantitative performance evaluation , 2004, J. Electronic Imaging.

[182]  Alexander Katsevich,et al.  Theoretically Exact Filtered Backprojection-Type Inversion Algorithm for Spiral CT , 2002, SIAM J. Appl. Math..

[183]  D. Grimaldi,et al.  Electron Microscopic Studies of Mummified Tissues in Amber Fossils , 1994 .

[184]  F. Natterer.  The Mathematics of Computerized Tomography , 1986 .