Energy management in fuel cell power trains

In this paper, experimental results obtained on a small size fuel cell power train (1.8 kW) based on a 500 W proton exchange membrane (PEM) stack are reported and discussed with specific regard to energy management issues to be faced for attainment of the maximum propulsion system efficiency. The fuel cell system (FCS) was realized and characterized via investigating the effects of the main operative variables on efficiency. This resulted in an efficiency higher than 30% in a wide power range with a maximum of 38% at medium load. The efficiency of the overall fuel cell power train measured during both steady state and dynamic conditions (European R40 driving cycle) was about 30%. A discussion about the control strategy to direct the power flows is reported with reference to two different test procedures used in dynamic experiments, i.e., load levelled and load following.

[1]  R. M. Moore,et al.  Fuel Cell Vehicle Simulation – Part 3: Modeling of Individual Components and Integration into the Overall Vehicle Model , 2003 .

[2]  David A. J. Rand,et al.  Fuel cells for road transportation purposes — yes or no? , 2001 .

[3]  Maurice Fadel,et al.  Modelling and control of a Fuel Cell System and Storage Elements in transport applications , 2005 .

[4]  Fortunato Migliardini,et al.  Experimental study of a fuel cell power train for road transport application , 2005 .

[5]  James Larminie,et al.  Fuel Cell Systems Explained , 2000 .

[6]  Lino Guzzella,et al.  Air Supply System of a PEMFC Stack Dynamic Model , 2005 .

[7]  U. Wagner,et al.  Experimental analysis of water management in a self-humidifying polymer electrolyte fuel cell stack , 2004 .

[8]  Mohammad Tariq Iqbal,et al.  Modelling and Analysis of Electro‐chemical, Thermal, and Reactant Flow Dynamics for a PEM Fuel Cell System , 2005 .

[9]  Whitney G Colella,et al.  Market prospects, design features, and performance of a fuel cell-powered scooter , 2000 .

[10]  Huamin Zhang,et al.  The Characteristics of a PEM Fuel Cell Engine with 40 kW Vehicle Stacks , 2004 .

[11]  Otmar Bitsche,et al.  Systems for hybrid cars , 2004 .

[12]  Mario Conte,et al.  Hydrogen economy for a sustainable development: state-of-the-art and technological perspectives , 2001 .

[13]  Pengcheng Shu,et al.  Theoretical and experimental studies of water injection scroll compressor in automotive fuel cell systems , 2005 .

[14]  Andreas Jossen,et al.  Hybrid systems with lead–acid battery and proton-exchange membrane fuel cell , 2005 .

[15]  M. Dresselhaus,et al.  Carbon nanotubes : synthesis, structure, properties, and applications , 2001 .

[16]  Kwi Seong Jeong,et al.  An experimental study of controlling strategies and drive forces for hydrogen fuel cell hybrid vehicles , 2003 .

[17]  L. Carrette,et al.  Fuel cells: principles, types, fuels, and applications. , 2000, Chemphyschem : a European journal of chemical physics and physical chemistry.

[18]  Roger A. Dougal,et al.  Design and experimental tests of control strategies for active hybrid fuel cell/battery power sources , 2004 .

[19]  Felix N. Büchi,et al.  Modular Stack‐Internal Air Humidification Concept‐Verification in a 1 kW Stack , 2004 .

[20]  Salvador M. Aceves,et al.  Onboard Storage Alternatives for Hydrogen Vehicles , 1998 .

[21]  Zhang Wei,et al.  Research on oil-free air scroll compressor with high speed in 30 kW fuel cell , 2003 .

[22]  Lino Guzzella,et al.  Optimal power management of an experimental fuel cell/supercapacitor-powered hybrid vehicle , 2005 .

[23]  Anna G. Stefanopoulou,et al.  Coordination of converter and fuel cell controllers , 2005 .

[24]  Lars Overgaard,et al.  Real life testing of a hybrid PEM fuel cell bus , 2003 .

[25]  Bassam Tabbara,et al.  Hydrogen Fuel for Surface Transportation , 1996 .

[26]  B. Höhlein,et al.  Assessment of Fuel‐Cell‐Based Passenger Cars , 2004 .