Effect of Yield Strength of a Circular Saw Blade on the Multi-spot Pressure Tensioning Process

In this study, a numerical model of the tangential tensioning stress distribution of a circular saw blade tensioned by multi-spot pressure was established using theoretical analysis, and the tangential tensioning stress distribution of the circular saw blade calculated by the model was shown to be true and reliable. The effect of yield strength of the circular saw blade on the distribution of tangential tensioning stress was studied using the numerical model. The research achievements showed that a circular saw blade made with high-strength or ultra-high-strength steel yielded a better tensioning effect during the multi-spot pressure tensioning process, which could promote the application of a circular saw blade made by high-strength or ultra-high-strength steel.

[1]  M. Renner,et al.  Using Finite Elements to model circular saw roll tensioning , 1996, Holz als Roh- und Werkstoff.

[2]  Y. M. Stakhiev.  Coordination of saw blade tensioning with rotation speed: myth or reality? , 2004, Holz als Roh- und Werkstoff.

[3]  F. C. Appl,et al.  Effects of Tensioning on Buckling and Vibration of Circular Saw Blades , 1975 .

[4]  Bo Li,et al.  Model for Tangential Tensioning Stress in the Edge of Circular Saw Blades Tensioned by Multi-Spot Pressure , 2015 .

[5]  N. Noda,et al.  Analysis of Dynamic Characteristics of Rotating Circular Saw Subjected to Thermal Loading and Tensioning , 2010 .

[6]  C. D. Mote,et al.  Analysis of optimal roll tensioning for circular saw stability , 2007 .

[7]  C. D. Mote,et al.  Analysis of roll tensioning and its influence on circular saw stability , 1983, Wood Science and Technology.

[8]  C. D. Mote,et al.  A review of residual stresses and tensioning in circular saws , 1974, Wood Science and Technology.

[9]  C. D. Mote,et al.  Theoretical and experimental analysis of circular saw tensioning , 1979, Wood Science and Technology.

[10]  Y. Ootao,et al.  Genetic Algorithm Optimization for Tensioning in a Rotating Circular Saw Under a Thermal Load , 2012 .

[11]  G. S. Schajer,et al.  High-speed circular sawing using temporary tensioning , 1996, Holz als Roh- und Werkstoff.

[12]  Mats Ekevad,et al.  NATURAL FREQUENCIES OF ROLL-TENSIONED CIRCULAR SAWBLADES: EFFECTS OF ROLLER LOADS, NUMBER OF GROOVES, AND GROOVE POSITIONS , 2012 .