论文信息 - Evaluation of High and Low Activation Resists for EUV Lithography - 字舞流文

Evaluation of High and Low Activation Resists for EUV Lithography

James W. Thackeray | Roger A. Nassar | Tom Wallow | Kathleen Spear-Alfonso | Bruno M. LaFontaine

[1] Munirathna Padmanaban,et al. Delay-time effects between exposure and post-exposure bake in acetal-based deep-UV photoresists , 1993, Advanced Lithography.

[2] David Van Steenwinckel,et al. Lithographic importance of acid diffusion in chemically amplified resists , 2005, SPIE Advanced Lithography.

[3] Wu-Song Huang,et al. Evaluation of a new environmentally stable positive tone chemically amplified deep-UV resist , 1994, Advanced Lithography.

[4] Wolf-Dieter Domke,et al. Comparison of resist outgassing at wavelengths from 193 nm to 13 nm , 2005, SPIE Advanced Lithography.

[5] Kim Dean,et al. Effects of material design on extreme ultraviolet (EUV) resist outgassing , 2006, SPIE Advanced Lithography.

[6] Mark D. Smith,et al. The lithographic impact of resist model parameters , 2004, SPIE Advanced Lithography.

[7] Wang Yueh,et al. Quantification of EUV resist outgassing , 2005, SPIE Advanced Lithography.

[8] K. Petrillo,et al. ENVIRONMENTALLY STABLE CHEMICAL AMPLIFICATION POSITIVE RESIST: PRINCIPLE, CHEMISTRY, CONTAMINATION RESISTANCE, AND LITHOGRAPHIC FEASIBILITY , 1994 .

[9] Roderick R. Kunz. Photoresist outgassing: a potential Achilles heel for short-wavelength optical lithography? , 2004, SPIE Advanced Lithography.

[10] C. Willson,et al. Chemical amplification in the design of dry developing resist materials , 1983 .