Deposition Mechanism Analysis of Cold-Sprayed Fluoropolymer Coatings and Its Wettability Evaluation

[1]  J. Rothstein,et al.  Characterization of the cold spray deposition of a wide variety of polymeric powders , 2020 .

[2]  M. Jasiorski,et al.  Prospects of Low-Pressure Cold Spray for Superhydrophobic Coatings , 2019 .

[3]  K. Ogawa,et al.  Influence of nanoceramic interlayer on polymer consolidation during cold-spray coating formation , 2019, Journal of Materials Processing Technology.

[4]  K. Ogawa,et al.  Fabrication of micro-/nano-structured super-hydrophobic fluorinated polymer coatings by cold-spray , 2019, Surface and Coatings Technology.

[5]  A. Minea,et al.  Electrical Conductivity of New Nanoparticle Enhanced Fluids: An Experimental Study , 2019, Nanomaterials.

[6]  K. Ogawa,et al.  Effects of Nano-Ceramic Particle Addition for Cold Sprayed Fluoropolymer Coatings , 2019, Key Engineering Materials.

[7]  W. Knapp,et al.  Development of low pressure cold sprayed copper coatings on carbon fiber reinforced polymer (CFRP) , 2019, Surface and Coatings Technology.

[8]  W. Tillmann,et al.  Investigation of low-pressure cold-gas dynamic spraying of polyamide-12 (PA12) on steel surfaces , 2019, IOP Conference Series: Materials Science and Engineering.

[9]  K. Ogawa,et al.  Elucidation of cold-spray deposition mechanism by auger electron spectroscopic evaluation of bonding interface oxide film , 2019, Acta Materialia.

[10]  Jessica D. Schiffman,et al.  Polymer Particles with a Low Glass Transition Temperature Containing Thermoset Resin Enable Powder Coatings at Room Temperature. , 2018, Industrial & engineering chemistry research.

[11]  S. Yue,et al.  Investigation of Cold Spray on Polymers by Single Particle Impact Experiments , 2018, Journal of Thermal Spray Technology.

[12]  K. Ogawa,et al.  Understanding deposition mechanism in cold sprayed ultra high molecular weight polyethylene coatings on metals by isolated particle deposition method , 2018 .

[13]  Girish M. Joshi,et al.  Performance properties and applications of polytetrafluoroethylene (PTFE)—a review , 2018, Advanced Composites and Hybrid Materials.

[14]  S. Mohanty,et al.  A Review on Superhydrophobic Polymer Nanocoatings: Recent Development and Applications , 2018 .

[15]  R. N. Raoelison,et al.  Cold gas dynamic spray additive manufacturing today: Deposit possibilities, technological solutions and viable applications , 2017 .

[16]  Edgar Dutra Zanotto,et al.  The glassy state of matter: Its definition and ultimate fate , 2017 .

[17]  J. Rothstein,et al.  Optimization of Cold Spray Deposition of High-Density Polyethylene Powders , 2017, Journal of Thermal Spray Technology.

[18]  K. Yamamura,et al.  Drastic Improvement in Adhesion Property of Polytetrafluoroethylene (PTFE) via Heat-Assisted Plasma Treatment Using a Heater , 2017, Scientific Reports.

[19]  Maocai Wei,et al.  Preparation of PTFE/PDMS superhydrophobic coating and its anti-icing performance , 2017 .

[20]  J. Rothstein,et al.  Numerical Simulations of the High-Velocity Impact of a Single Polymer Particle During Cold-Spray Deposition , 2017, Journal of Thermal Spray Technology.

[21]  B. Jodoin,et al.  Cold Spraying of Armstrong Process Titanium Powder for Additive Manufacturing , 2017, Journal of Thermal Spray Technology.

[22]  K. Ogawa,et al.  Critical Deposition Condition of CoNiCrAlY Cold Spray Based on Particle Deformation Behavior , 2017, Journal of Thermal Spray Technology.

[23]  Y. Furukawa,et al.  A novel mouse model of intrahepatic cholangiocarcinoma induced by liver-specific Kras activation and Pten deletion , 2016, Scientific Reports.

[24]  Lena Mammen,et al.  Challenges and Opportunities of Superhydrophobic/Superamphiphobic Coatings in Real Applications , 2016 .

[25]  K. Ogawa,et al.  Effect of Substrate Surface Oxide Film Thickness on Deposition Behavior and Deposition Efficiency in the Cold Spray Process , 2015, Journal of Thermal Spray Technology.

[26]  K. Ogawa,et al.  Development of Ultra-High Molecular Weight Polyethylene (UHMWPE) Coating by Cold Spray Technique , 2015, Journal of Thermal Spray Technology.

[27]  K. Ogawa,et al.  Mechanistic Study and Characterization of Cold-Sprayed Ultra-High Molecular Weight Polyethylene-Nano-ceramic Composite Coating , 2015, Journal of Thermal Spray Technology.

[28]  P. Bertrand,et al.  Cold spraying: From process fundamentals towards advanced applications , 2015 .

[29]  J. Gardiner.  Fluoropolymers: Origin, Production, and Industrial and Commercial Applications , 2015 .

[30]  A. Nee,et al.  Handbook of Manufacturing Engineering and Technology , 2014 .

[31]  H. Zuilhof,et al.  Adhesion and friction properties of fluoropolymer brushes: on the tribological inertness of fluorine. , 2014, Langmuir : the ACS journal of surfaces and colloids.

[32]  K. Sparnacci,et al.  Thermal and mechanical properties of PES/PTFE composites and nanocomposites , 2013 .

[33]  Hong-xiang Teng.  Overview of the Development of the Fluoropolymer Industry , 2012 .

[34]  Abdulaziz S. Alhulaifi,et al.  Numerical and Experimental Investigation of Cold Spray Gas Dynamic Effects for Polymer Coating , 2012, Journal of Thermal Spray Technology.

[35]  H. Richter,et al.  On Parameter Selection in Cold Spraying , 2011 .

[36]  Daisuke Shindo,et al.  Charging Effects on SEM/SIM Contrast of Metal/Insulator System in Various Metallic Coating Conditions , 2010 .

[37]  Pierre Fauchais,et al.  Sensors in Spray Processes , 2010 .

[38]  P. Shipway,et al.  Bonding Mechanisms in Cold Spraying: The Contributions of Metallurgical and Mechanical Components , 2009 .

[39]  N. Onda,et al.  Characterization of Low-Pressure Cold-Sprayed Aluminum Coatings , 2008 .

[40]  T. Randall Lee,et al.  The wettability of fluoropolymer surfaces: influence of surface dipoles. , 2008, Langmuir : the ACS journal of surfaces and colloids.

[41]  I. Hutchings,et al.  Cold spray deposition of thermoplastic powder , 2006 .

[42]  Anatolii Papyrin,et al.  Cold Spray Technology , 2006 .

[43]  Lichao Gao,et al.  Contact angle hysteresis explained. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[44]  L. H. Sperling,et al.  Introduction to Physical Polymer Science: Sperling/Introduction to Physical Polymer Science, Fourth Edition , 2005 .

[45]  V. Champagne,et al.  The effects of gas and metal characteristics on sprayed metal coatings , 2005 .

[46]  V. Gun'ko,et al.  Morphology and surface properties of fumed silicas. , 2005, Journal of colloid and interface science.

[47]  Sabu Thomas,et al.  Nonisothermal crystallisation, melting behavior and wide angle X-ray scattering investigations on linear low density polyethylene (LLDPE)/ethylene vinyl acetate (EVA) blends: effects of compatibilisation and dynamic crosslinking , 2005 .

[48]  V. Villani,et al.  Melting and crystallization behavior of poly(tetrafluoroethylene) by temperature modulated calorimetry , 2004 .

[49]  Tim R. Dargaville,et al.  An investigation of the thermal and tensile properties of PFA following γ-radiolysis , 2003 .

[50]  Chang-Da Wen,et al.  Experimental investigation of emissivity of aluminum alloys and temperature determination using multispectral radiation thermometry (MRT) algorithms , 2002 .

[51]  I. Sutherland,et al.  Pretreatments of Fluoropolymers , 1994 .

[52]  V. Villani,et al.  Thermal properties at room temperature of polytetrafluoroethylene , 1991 .

[53]  R. Stephenson.  A and V , 1962, The British journal of ophthalmology.

[54]  AEROXIDE® Fumed Metal Oxides , 2018 .

[55]  M. Kotrba,et al.  Measurement of pH in Ethanol, Distilled Water, and their Mixtures: On the Assessment of pH in Ethanol-Based Natural History Wet Collections and the Detrimental Aspects of Dilution with Distilled Water , 2017 .

[56]  P. J. Goetz,et al.  Characterization of Liquids, Dispersions, Emulsions, and Porous Materials Using Ultrasound Ed. 3 , 2017 .

[57]  M. Smith,et al.  3 – Comparing cold spray with thermal spray coating technologies , 2007 .

[58]  A. Alkimov.  Gas-Dynamic spray Method for Applying a Coating , 1994 .

[59]  Della Basilicata.  THERMAL PROPERTIES AT ROOM TEMPERATURE OF POLYTETRAFLUOROE THYLENE , 1991 .

[60]  R. J. Hunter.  Chapter 5 – Electroviscous and Viscoelectric Effects , 1981 .

[61]  G. Gusev.  Hermans-Weidinger X-ray diffraction technique for determining polymer crystallinity and the use of the Ruland ratio , 1978 .