Physics-based minority charge and transit time modeling for bipolar transistors

It has been well known for many years that the transit time model used in the SPICE Gummel-Poon model (SGPM) is not adequate for reliable design of circuits operating either at high current densities (including quasi-saturation), which is often the case in high-speed integrated circuits, or at low voltages, which is important for low-power applications. In addition, extraction of the SGPM's transit time model parameters is often very difficult and time consuming. Although various proposals for modeling the transit time were published in the past, most of them are not suited for compact transistor models required in circuit simulation from a numerical, parameter extraction and lateral scaling point of view. In this paper, a set of minority charge and transit time equations is derived which are physics-based and laterally scaleable as well as suitable for incorporation into compact models. Experimental results of the new model are presented in terms of transit time and transit frequency versus bias (I/sub C/, V/sub CE/), geometry, and temperature, showing excellent agreement for different types of silicon homojunction bipolar transistors.

[1]  J. Weng,et al.  A physical model of the transit time in bipolar transistors , 1993 .

[2]  Michael Schroter,et al.  Investigation of very fast and high-current transients in digital bipolar IC's using both a new compact model and a device simulator , 1995, IEEE J. Solid State Circuits.

[3]  J.C. Marin,et al.  A 12V BICMOS technology for mixed analog-digital applications with high performance vertical pnp , 1990, ESSDERC '90: 20th European Solid State Device Research Conference.

[4]  E. J. Prendergast,et al.  A unified circuit model for bipolar transistors including quasi-saturation effects , 1985, IEEE Transactions on Electron Devices.

[5]  D. J. Walkey,et al.  Physical modeling of lateral scaling in bipolar transistors , 1996 .

[6]  J. Cressler,et al.  Si/SiGe epitaxial-base transistors. I. Materials, physics, and circuits , 1995 .

[7]  J. Kuo,et al.  A closed-form analytical poly-emitter BJT forward transit time model considering bandgap-narrowing effects and concentration-dependent diffusion coefficients for poly-emitter BJT devices , 1992 .

[8]  C. C. McAndrew,et al.  VBIC95, the vertical bipolar inter-company model , 1996, IEEE J. Solid State Circuits.

[9]  M. Schroter,et al.  Transit time of high-speed bipolar transistors in dependence on operating point, technological parameters, and temperature , 1989, Proceedings of the Bipolar Circuits and Technology Meeting.

[10]  Charles Y. Wrigley,et al.  Fundamentals of semiconductor devices , 1965 .

[11]  H. Stubing,et al.  A compact physical large-signal model for high-speed bipolar transistors at high current densities—Part I: One-dimensional model , 1987, IEEE Transactions on Electron Devices.

[12]  Hans-Martin Rein,et al.  Design considerations for very-high-speed Si-bipolar IC's operating up to 50 Gb/s , 1996, IEEE J. Solid State Circuits.

[13]  Hans-Martin Rein,et al.  Proper choice of the measuring frequency for determining fT of bipolar transistors , 1983 .

[14]  Kunihiro Suzuki.  Emitter and base transit time of polycrystalline silicon emitter contact bipolar transistors , 1991 .

[15]  Jerry G. Fossum,et al.  A charge-based large-signal bipolar transistor model for device and circuit simulation , 1989 .

[16]  D. J. Walkey,et al.  Simultaneous extraction of thermal and emitter series resistances in bipolar transistors , 1997, Proceedings of the 1997 Bipolar/BiCMOS Circuits and Technology Meeting.

[17]  J.R.A. Beale,et al.  The equivalent circuit of a transistor with a lightly doped collector operating in saturation , 1968 .

[18]  C. T. Kirk,et al.  A theory of transistor cutoff frequency (fT) falloff at high current densities , 1962, IRE Transactions on Electron Devices.

[19]  Analytical relations for the base transit time and collector current in BJTs and HBTs , 1997 .