Analysis of the precipitation behaviour in a high-speed steel by means of small-angle neutron scattering

Abstract Small-angle neutron scattering (SANS) and energy-filtered transmission electron microscopy (EFTEM) were employed to characterise the precipitation behaviour in the high-speed steel HS6-5-2 during tempering. With SANS the evolution of the size distribution of precipitates during isothermal tempering at 590 °C was investigated. The SANS results are discussed assuming that three populations of precipitates can be distinguished during tempering at 590 °C. The smallest population with sizes around 1 nm is supposed to be carbon-rich clusters. Intermediate-sized particles between approximately 1 and 10 nm might be either MC and/or M 2 C carbides, which cannot be distinguished by SANS. In addition, the ratio A of magnetic and nuclear scattering intensity was used to gain information on the composition of the precipitates. The A -ratio is discussed assuming a substitution of iron in the precipitates by carbide forming elements with increasing tempering time. Finally, the correlation of the results obtained by SANS with those achieved by EFTEM is presented.

[1]  G. Kothleitner,et al.  Quantitative analysis of EFTEM elemental distribution images , 1997 .

[2]  A. Allen,et al.  SANS and TEM studies of isothermal M2C carbide precipitation in ultrahigh strength AF1410 steels , 1993 .

[3]  G. Fournet,et al.  Small‐Angle Scattering of X‐Rays , 1956 .

[4]  A. Nairn.  Palaeomagnetic measurements on the Great Dyke, southern rhodesia , 1963 .

[5]  O. Glatter,et al.  A new method for the evaluation of small‐angle scattering data , 1977 .

[6]  J. Böhmert,et al.  Dependence of the ratio between magnetic and nuclear small angle neutron scattering on the size of the heterogeneities , 2000 .

[7]  L. Svensson,et al.  High resolution microanalytical study of precipitation in a powder metallurgical high speed steel , 1984 .

[8]  W. Grogger,et al.  On the application of energy filtering TEM in materials science: I. Precipitates in a Ni/Cr-alloy , 1995 .

[9]  P. Hirsch,et al.  The theory of small angle scattering from dislocations , 1958 .

[10]  O. Glatter,et al.  Determination of particle-size distribution functions from small-angle scattering data by means of the indirect transformation method , 1980 .

[11]  Herbert Herman,et al.  Treatise on Materials Science and Technology , 1979 .

[12]  H. Andren,et al.  The role of alloy composition in the precipitation behaviour of high speed steels , 1992 .

[13]  P. Staron,et al.  Small-angle neutron scattering analysis of the precipitation behaviour in a maraging steel , 2003 .

[14]  G. Dunlop,et al.  The crystallography of secondary carbide precipitation in high speed steel , 1984 .

[15]  A. Pundt,et al.  Interaction of hydrogen and deuterium with dislocations in palladium as observed by small angle neutron scattering , 2001 .

[16]  H. Fischmeister,et al.  Microstructural changes during overtempering of high-speed steels , 1992 .

[17]  H. Fischmeister,et al.  An atom probe study of secondary hardening in high speed steels , 1988 .