Development of a fuel consumption equation: Test case for a tractor chisel-ploughing in a clay loam soil

Fuel consumption and tillage draught were measured when chiselling in a clay loam soil in Badjgah Research Station, Shiraz University, Shiraz, Iran. An 81 kW tractor (MF-399) instrumented with a data acquisition system was used to measure fuel consumption, actual forward speed, theoretical forward speed, slip and implement draught. The effects of blade width (5 and 10 cm), tillage depth (10, 15 and 20 cm) and actual forward speed (3, 4 and 5 km h−1) upon fuel consumption were investigated. Fuel consumption was assumed to be a function of wheel numeric, slip, net traction ratio, rolling resistance ratio, chisel-tool aspect ratio and actual forward speed. Collected data were used to model the tractor fuel consumption using dimensional analysis approach. Results were compared to fuel consumption rates as predicted by ASAE Standards (D497.4). The comparisons showed that the standard overestimates fuel consumption by 26–53%. Results from regression (F-test) between predicted and measured fuel consumption data showed that the slopes for fuel consumption with the 5 and 10 cm blade widths were not significantly different from 1:1 line (P ≤ 0.05). Consequently, the fuel consumption rate can be successfully predicted by the model with good accuracy.

[1]  Josef Boxberger,et al.  Energy consumption in cultivating and ploughing with traction improvement system and consideration of the rear furrow wheel-load in ploughing , 2013 .

[2]  José Peça,et al.  The effect of gang angle of offset disc harrows on soil tilth, work rate and fuel consumption , 2003 .

[3]  Hossein Mobli,et al.  AVERAGE AND INSTANTANEOUS FUEL CONSUMPTION OF IRANIAN CONVENTIONAL TRACTOR WITH MOLDBOARD PLOW IN TILLAGE , 2010 .

[4]  Randy L. Raper,et al.  EFFECT OF ANNUAL, BIENNIAL, AND TRIENNIAL IN-ROW SUBSOILING ON SOIL COMPACTION AND COTTON YIELD IN SOUTHEASTERN U.S. SILT LOAM SOILS , 2005 .

[5]  J. H. Taylor.  Energy savings through improved tractive efficiency , 1981 .

[6]  Abdulrahman Al-Janobi,et al.  A data-acquisition system to monitor performance of fully mounted implements. , 2000 .

[7]  Anacleto Pinheiro,et al.  Tractor energy requirements in disc harrow systems , 2007 .

[8]  Virendra Tewari,et al.  Digital wheel slipmeter for agricultural 2WD tractors , 2010 .

[9]  Yousef Abbaspour-Gilandeh,et al.  Artificial Neural Network and stepwise multiple range regression methods for prediction of tractor fuel consumption , 2011 .

[10]  Ajit K. Srivastava,et al.  Engineering Principles of Agricultural Machines , 1993 .

[11]  John B. Liljedahl,et al.  Tractors and Their Power Units , 1952, Soil Science Society of America Journal.

[12]  Crowell G. Bowers,et al.  Southeastern Tillage Energy Data and Recommended Reporting , 1985 .

[13]  Lowrey A. Smith.  Energy requirements for selected crop production implements , 1993 .

[15]  H. Langhaar.  Dimensional analysis and theory of models , 1951 .

[16]  Hifjur Raheman,et al.  Draught Prediction of Agricultural Implements using Reference Tillage Tools in Sandy Clay Loam Soil , 2006 .