Effect of Hot Rolling on the Microstructure and Mechanical Properties of Nitrogen Alloyed Austenitic Stainless Steel
暂无分享,去创建一个
[1] P. V. Venkitakrishnan,et al. Strengthening in high strength Cu-Cr-Zr-Ti alloy plates produced by hot rolling , 2016 .
[2] P. V. Venkitakrishnan,et al. On the direct aging of iron based superalloy hot rolled plates , 2015 .
[3] L. Brandão,et al. Dislocation Density by X-ray Diffraction in α Brass Deformed by Rolling and ECAE , 2015 .
[4] D. Kim. Influence of nitrogen-induced grain refinement on mechanical properties of nitrogen alloyed type 316LN stainless steel , 2012 .
[5] R. Kaibyshev,et al. Structural strengthening of an austenitic stainless steel subjected to warm-to-hot working , 2011 .
[6] N. Tsuji,et al. Quantification of internal dislocation density using scanning transmission electron microscopy in ultrafine grained pure aluminium fabricated by severe plastic deformation , 2010 .
[7] A. Najafizadeh,et al. Flow stress analysis of TWIP steel via the XRD measurement of dislocation density , 2010 .
[8] Zhenhua Wang,et al. Mechanical Behavior and Microstructural Change of a High Nitrogen CrMn Austenitic Stainless Steel during Hot Deformation , 2010 .
[9] Zhou-hua Jiang,et al. Effects of nitrogen on the passivation of nickel-free high nitrogen and manganese stainless steels in acidic chloride solutions , 2009 .
[10] G. Frommeyer,et al. Enhanced Mechanical Properties of a Novel High-Nitrogen Cr-Mn-Ni-Si Austenitic Stainless Steel via TWIP/TRIP Effects , 2009 .
[11] Joseph K. L. Lai,et al. Recent developments in stainless steels , 2009 .
[12] A. Najafizadeh,et al. Correlation between Zener-Hollomon parameter and necklace DRX during hot deformation of 316 stainless steel , 2009 .
[13] Zhou-hua Jiang,et al. Effect of Grain Size on Mechanical Properties of Nickel-Free High Nitrogen Austenitic Stainless Steel , 2009 .
[14] R. Sandström,et al. Modelling solid solution hardening in stainless steels , 2006 .
[15] A. Lichtenberger,et al. Mechanical behaviour of nitrogen-alloyed austenitic stainless steel hardened by warm rolling , 2006 .
[16] T. Tsuchiyama,et al. Limit of Dislocation Density and Dislocation Strengthening in Iron , 2006 .
[17] T. Hanamura,et al. Phosphorus-induced dislocation structure variation in the warm-rolled ultrafine-grained low-carbon steels , 2003 .
[18] Jose Maria Kenny,et al. Grain refinement strengthening of a micro-crystalline high nitrogen austenitic stainless steel , 2003 .
[19] Y. Katada,et al. Role of nitrogen on the corrosion behavior of austenitic stainless steels , 2002 .
[20] B. Johansson,et al. Elastic property maps of austenitic stainless steels. , 2002, Physical review letters.
[21] G. Balachandran,et al. Some Theoretical Aspects on Designing Nickel Free High Nitrogen Austenitic Stainless Steels , 2001 .
[22] Sang-Hyun Cho,et al. Hot rolling simulations of austenitic stainless steel , 2001 .
[23] R. Sandström,et al. Proof strength values for austenitic stainless steels at elevated temperatures , 2000 .
[24] G. Balachandran,et al. Processing Nickel Free High Nitrogen Austenitic Stainless Steels through Conventional Electroslag Remelting Process , 2000 .
[25] V. Gavriljuk. Nitrogen in Iron and Steel , 1996 .
[26] Yasushi Murata,et al. Recent Trends in the Production and Use of High Strength Stainless Steels , 1993 .
[27] C. M. Sellars,et al. Modelling microstructural development during hot rolling , 1990 .
[28] C. M. Sellars,et al. Recrystallization and grain growth in hot rolling , 1979 .
[29] R. Ham. The determination of dislocation densities in thin films , 1961 .
[30] G. K. Williamson,et al. III. Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray debye-scherrer spectrum , 1956 .