论文信息 - HIGH TEMPERATURE LOW CYCLE BIAXIAL FATIGUE OF TWO STEELS

HIGH TEMPERATURE LOW CYCLE BIAXIAL FATIGUE OF TWO STEELS

— Biaxial low cycle fatigue tests at various temperatures and strain rates were performed on 1% Cr-Mo-V steel and AISI 316 stainless steel under combined torsional and axial loads. A correlation for fatigue strength has been derived, and it is also shown that if the Gough ellipse quadrant criterion is rephrased in terms of strain amplitudes, it may be used as a safe design rule for ductile metals in both the low and high cycle fatigue regimes.

K. J. Miller | M. Brown | K. Miller | Malcolm Brown | Malcolm Brown

[1] B. Tomkins. FATIGUE CRACK PROPAGATION: AN ANALYSIS. , 1968 .

[2] K. J. Miller,et al. An experimental linear cumulative-damage law , 1970 .

[3] Kiyotsugu Ohji,et al. A Comparison of the Axial and Reversed-Torsional Strain Cycling Low-Cycle Fatigue Strength of Several Structural Materials , 1971 .

[4] L. F. Coffin. Fatigue at High Temperature-Prediction and Interpretation: , 1974 .

[5] M. Brown. Torsional stresses in tubular specimens , 1978 .

[6] M. W. Brown,et al. Low-Cycle Fatigue Under Out-of-Phase Loading Conditions , 1977 .

[7] T. Topper,et al. A Criterion for Biaxial Fatigue of Mild Steel at Low Endurance , 1971 .

[8] D. Gonyea,et al. Method for Low-Cycle Fatigue Design Including Biaxial Stress and Notch Effects , 1973 .

[9] H. J. Gough,et al. SOME EXPERIMENTS ON THE RESISTANCE OF METALS TO FATIGUE UNDER COMBINED STRESSES PART I AND PART II. Reports and Memoranda No. 2522 , 1952 .

[10] K. Miller,et al. BIAXIAL CYCLIC DEFORMATION BEHAVIOUR OF STEELS , 1979 .