A flexible sensing device based on a PVDF/MWCNT composite nanofiber array with an interdigital electrode

Abstract This study reports the electrospinning of polyvinylidene fluoride (PVDF) piezoelectric nanofiber array on an interdigital (IDT) electrode to fabricate a flexible sensing device. This sensing device can convert the mechanical energies of low-frequency ambient vibrations and impacts into electrical signals. A mixed solution of PVDF and multi-wall carbon nanotube (MWCNT) was filled in a metallic needle injector that was connected with a high voltage of 1200 V. When the PVDF droplet in the needle tip was subjected to a high electric field, an extremely fine PVDF fiber can be spun out. The electrospun fibers were collected orderly using an X–Y stage. In the electrospinning process, the fiber was polarized and transformed into the piezoelectric β-crystalline phase. PVDF/MWCNT crystallization as spherical composite structures can enhance the piezoelectric properties of PVDF fibers. Photolithography and etching processes were used to fabricate an IDT electrode with a gap of 100 μm on a flexible polyimide (PI) substrate. The PVDF fiber array was packaged with epoxy/PI film. The packaged PVDF fiber array was repolarized in a high electric field of approximately 7 V/μm to increase d33 mode conversion efficiency. The comparison of the analytical solution of the composite plate equation and the experimental results shows that the device can generate a peak voltage and current of 20.2 mV and 39 nA under 6 Hz vibration. In addition, at an impact testing at 15 Hz, the peak voltage of 24.4 mV with a current of 130 nA can be obtained.

[1]  Liwei Lin,et al.  Piezoelectric nanofibers for energy scavenging applications , 2012 .

[2]  Kyungsuk Yum,et al.  Voltage generation from individual BaTiO(3) nanowires under periodic tensile mechanical load. , 2007, Nano letters.

[3]  Randy H. Katz,et al.  Next century challenges: mobile networking for “Smart Dust” , 1999, MobiCom.

[4]  W. Hwang,et al.  Finite Element Modeling of Piezoelectric Sensors and Actuators , 1993 .

[5]  Paolo Dario,et al.  A Novel Bioinspired PVDF Micro/Nano Hair Receptor for a Robot Sensing System , 2010, Sensors.

[6]  Zhong Lin Wang.  Energy harvesting for self-powered nanosystems , 2008 .

[7]  Cheng-Tang Pan,et al.  Study of broad bandwidth vibrational energy harvesting system with optimum thickness of PET substrate , 2012 .

[8]  M. Kotaki,et al.  Morphology, polymorphism behavior and molecular orientation of electrospun poly(vinylidene fluoride) fibers , 2007 .

[9]  W.T. Chang,et al.  Study of vibration-induced broadband flexible piezoelectric ZnO micro-harvester with storage system , 2011, 2011 16th International Solid-State Sensors, Actuators and Microsystems Conference.

[10]  Lu Dong,et al.  Fabrication and performance of MEMS-based piezoelectric power generator for vibration energy harvesting , 2006, Microelectron. J..

[11]  L. Ibos,et al.  Structural evolution of PVDF during storage or annealing , 2004 .

[12]  Di Chen,et al.  A MEMS-based piezoelectric power generator array for vibration energy harvesting , 2008, Microelectron. J..

[13]  Liwei Lin,et al.  Near-field electrospinning. , 2006, Nano letters.

[14]  Wonkyu Moon,et al.  Permanent Polarity and Piezoelectricity of Electrospun α‐Helical Poly(α‐Amino Acid) Fibers , 2011, Advanced materials.

[15]  Michael C. McAlpine,et al.  Piezoelectric ribbons printed onto rubber for flexible energy conversion. , 2010, Nano letters.

[16]  V. B. Venkayya,et al.  Finite element analysis of laminated composite structures containing distributed piezoelectric actuators and sensors , 1995 .

[17]  Liwei Lin,et al.  Direct-write PVDF nonwoven fiber fabric energy harvesters via the hollow cylindrical near-field electrospinning process , 2014 .

[18]  Liwei Lin,et al.  Piezoelectric properties of PVDF/MWCNT nanofiber using near-field electrospinning , 2013 .

[19]  Chengliang Sun,et al.  Magnetoelectric coupling in CoFe₂O₄/SrRuO₃/Pb(Zr[sub 0.52]Ti[sub 0.48])O₃ heteroepitaxial thin film structure , 2008 .

[20]  Liwei Lin,et al.  Direct-write piezoelectric polymeric nanogenerator with high energy conversion efficiency. , 2010, Nano letters.

[21]  Saibal Roy,et al.  A micro electromagnetic generator for vibration energy harvesting , 2007 .

[22]  Xiaojun Yan,et al.  Piezoelectric actuation of a direct write electrospun PVDF fiber , 2010, 2010 IEEE 23rd International Conference on Micro Electro Mechanical Systems (MEMS).

[23]  Cheng-Tang Pan,et al.  Design and fabrication of flexible piezo-microgenerator by depositing ZnO thin films on PET substrates , 2010 .

[24]  M. Khil,et al.  The effect of molecular weight and the linear velocity of drum surface on the properties of electrospun poly(ethylene terephthalate) nonwovens , 2004 .

[25]  Zhiyuan Gao,et al.  GaN nanowire arrays for high-output nanogenerators. , 2010, Journal of the American Chemical Society.

[26]  Xi Chen,et al.  1.6 V nanogenerator for mechanical energy harvesting using PZT nanofibers. , 2010, Nano letters.

[27]  Zhong Lin Wang,et al.  Piezoelectric Nanogenerators Based on Zinc Oxide Nanowire Arrays , 2006, Science.

[28]  Yong Ding,et al.  Piezoelectric nanogenerator using CdS nanowires , 2008 .