Screening the geomechanical stability (thermal and mechanical) of shared multi-user CO2 storage assets: A simple effective tool applied to the Captain Sandstone Aquifer

[1]  Wenqing Wang,et al.  Thermo-Hydro-Mechanical-Chemical Processes in Porous Media: Benchmarks and Examples , 2018 .

[2]  R. Haszeldine,et al.  Appraisal of global CO2 storage opportunities using the geomechanical facies approach , 2015, Environmental Earth Sciences.

[3]  S. Hosseini,et al.  Geological CO2 storage: Incorporation of pore-pressure/stress coupling and thermal effects to determine maximum sustainable pressure limit , 2014 .

[4]  Elena Tillner,et al.  3D Hydro-mechanical Scenario Analysis to Evaluate Changes of the Recent Stress Field as a Result of Geological CO2 Storage☆ , 2013 .

[5]  Wenqing Wang,et al.  OpenGeoSys: an open-source initiative for numerical simulation of thermo-hydro-mechanical/chemical (THM/C) processes in porous media , 2012, Environmental Earth Sciences.

[6]  Simon Shackley,et al.  Progressing Scotland's CO2 storage opportunities , 2011 .

[7]  J. Rutqvist,et al.  Modeling of coupled deformation and permeability evolution during fault reactivation induced by deep underground injection of CO2 , 2011 .

[8]  Olaf Kolditz,et al.  Application of the geomechanical facies approach and comparison of exploration and evaluation methods used at Soultz-sous-Forêts (France) and Spa Urach (Germany) geothermal sites , 2010 .

[9]  J. Nauroy,et al.  3D geomechanical modelling for CO2 geologic storage in the Dogger carbonates of the Paris Basin , 2009 .

[10]  Christophe Geuzaine,et al.  Gmsh: A 3‐D finite element mesh generator with built‐in pre‐ and post‐processing facilities , 2009 .

[11]  C. Tsang,et al.  Estimating maximum sustainable injection pressure during geological sequestration of CO2 using coupled fluid flow and geomechanical fault-slip analysis , 2006 .

[12]  Olaf Kolditz,et al.  Simulation of heat extraction from crystalline rocks: The influence of coupled processes on differential reservoir cooling , 2006 .

[13]  M. Zoback,et al.  Empirical relations between rock strength and physical properties in sedimentary rocks , 2006 .

[14]  Olaf Kolditz,et al.  Investigation of coupled hydraulic–geomechanical processes at the KTB site: pressure‐dependent characteristics of a long‐term pump test and elastic interpretation using a geomechanical facies model , 2006 .

[15]  S. Pinnock,et al.  The Captain Field, Block 13/22a, UK North Sea , 2003, Geological Society, London, Memoirs.

[16]  Gudmundur S. Bodvarsson,et al.  A modeling approach for analysis of coupled multiphase fluid flow, heat transfer, and deformation in fractured porous rock , 2002 .

[17]  Richard R. Hillis,et al.  Coupled changes in pore pressure and stress in oil fields and sedimentary basins , 2001, Petroleum Geoscience.

[18]  B. Schrefler,et al.  The Finite Element Method in the Static and Dynamic Deformation and Consolidation of Porous Media , 1998 .

[19]  E. Fjaer.  Petroleum Related Rock Mechanics , 1992 .

[20]  G. Marsily.  Quantitative Hydrogeology: Groundwater Hydrology for Engineers , 1986 .

[21]  J. C. Jaeger,et al.  Fundamentals of rock mechanics , 1969 .