Imaging of Subsurface Corrosion Using Gradient-Field Pulsed Eddy Current Probes with Uniform Field Excitation

A corrosive environment leaves in-service conductive structures prone to subsurface corrosion which poses a severe threat to the structural integrity. It is indispensable to detect and quantitatively evaluate subsurface corrosion via non-destructive evaluation techniques. Although the gradient-field pulsed eddy current technique (GPEC) has been found to be superior in the evaluation of corrosion in conductors, it suffers from a technical drawback resulting from the non-uniform field excited by the conventional pancake coil. In light of this, a new GPEC probe with uniform field excitation for the imaging of subsurface corrosion is proposed in this paper. The excited uniform field makes the GPEC signal correspond only to the field perturbation due to the presence of subsurface corrosion, which benefits the corrosion profiling and sizing. A 3D analytical model of GPEC is established to analyze the characteristics of the uniform field induced within a conductor. Following this, experiments regarding the imaging of subsurface corrosion via GPEC have been carried out. It has been found from the results that the proposed GPEC probe with uniform field excitation not only applies to the imaging of subsurface corrosion in conductive structures, but provides high-sensitivity imaging results regarding the corrosion profile and opening size.

[1]  R LeTessier,et al.  Sizing of cracks using the alternating current field measurement technique , 2002 .

[2]  C. Borsellino,et al.  Effect of corrosion degradation on failure mechanisms of aluminium/steel clinched joints , 2015 .

[3]  Jiuhao Ge,et al.  A feed-through ACFM probe with sensor array for pipe string cracks inspection , 2014 .

[4]  Yong Li,et al.  Pulse-modulation eddy current probes for imaging of external corrosion in nonmagnetic pipes , 2017 .

[5]  Yong Li,et al.  Pulse-modulation eddy current inspection of subsurface corrosion in conductive structures , 2016 .

[6]  Masumi Saka,et al.  A time-dependent direct current potential drop method to evaluate thickness of an oxide layer formed naturally and thermally on a large surface of carbon steel , 2012 .

[7]  Ramesh Singh,et al.  Applied Welding Engineering: Processes, Codes, and Standards , 2011 .

[8]  Javier García-Martín,et al.  Non-Destructive Techniques Based on Eddy Current Testing , 2011, Sensors.

[9]  W. D. Dover,et al.  The use of AC-held measurem ents for crack detection and sizing in air and underwater , 1986, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.

[10]  Feargal Brennan,et al.  Effect of residual stress on ACFM crack measurements in drill collar threaded connections , 2004 .

[11]  Yu Zhang,et al.  Magnetic-Field-Based 3D ETREE Modelling for Multi-Frequency Eddy Current Inspection , 2010, CCTA.

[12]  Yong Li,et al.  The investigation on the optimal design of rectangular PECT probes for evaluation of defects in conductive structures , 2013 .

[13]  Yong Li,et al.  A Gradient-Field Pulsed Eddy Current Probe for Evaluation of Hidden Material Degradation in Conductive Structures Based on Lift-Off Invariance , 2017, Sensors.

[14]  Yong Li,et al.  Gradient-field pulsed eddy current probes for imaging of hidden corrosion in conductive structures , 2016 .

[15]  R. Clark,et al.  Response of horizontal-axis eddy-current coils to layered media: a theoretical and experimental study , 1990 .

[16]  Theodoros Theodoulidis,et al.  Impedance evaluation of rectangular coils for eddy current testing of planar media , 2002 .

[17]  J. Jurga,et al.  Analysis of Uniformity of Magnetic Field Generated by the Two-Pair Coil System , 2013, Applied magnetic resonance.

[18]  Theodoros Theodoulidis,et al.  Eddy current canonical problems (with applications to nondestructive evaluation) , 2006 .

[19]  Sebastian Münstermann,et al.  Characterizing Ductile Damage and Failure: Application of the Direct Current Potential Drop Method to Uncracked Tensile Specimens , 2014 .

[20]  Jiuhao Ge,et al.  High sensitivity rotating alternating current field measurement for arbitrary-angle underwater cracks , 2016 .

[21]  Guan Xuesong,et al.  Analysis and Innovation for Penetrant Testing for Airplane Parts , 2015 .

[22]  Achal Pandya,et al.  Role of environmental particulate matters on corrosion of copper , 2016 .