Evolution of mechanical properties of concrete containing ground granulated blast furnace slag and effects on the scaling resistance test at 28 days

Abstract Compressive strength, ultrasonic pulse velocity (UPV), non-evaporable water content and the interplay between them were investigated at 1, 3, 7 and 28 days to determine the effects of using ground granulated blast furnace slag (GGBFS) as cement replacement. The variables considered include percentage of GGBFS as cement replacement (0–60%), total binder content (270–450 kg/m3), water-to-binder ratio (0.31, 0.38) and curing period. The dilution effect was observed at day 3, at which point, increasing the amount of GGBFS as cement replacement yielded lower compressive strengths. The results show that the evolution of mechanical properties is affected by the amount of water, percent of GGBFS added and curing regime. By 28 days, the benefit of using GGBFS as cement replacement owing to its effect on the concrete’s packing density and hydration processes was reflected in the compressive strength and UPV measurements when used up to 50% cement replacement. Compressive strength of concrete containing GGBFS is found to increase on average by 10% from 28 days to 120 days. Measurements of non-evaporable water content and mass loss due to scaling revealed that the scaling resistance test for concrete at 28 days is more favorable towards OPC concrete and discriminates against concrete containing high percentages of GGBFS as cement replacement.

[1]  Erick Ringot,et al.  Efficiency of mineral admixtures in mortars: Quantification of the physical and chemical effects of fine admixtures in relation with compressive strength , 2006 .

[2]  C. Brebbia,et al.  High Performance Structures and Materials II , 2004 .

[3]  D. Panesar,et al.  Multi-variable statistical analysis for scaling resistance of concrete containing GGBFS , 2007 .

[4]  Ramazan Demirboga,et al.  RELATIONSHIP BETWEEN ULTRASONIC VELOCITY AND COMPRESSIVE STRENGTH FOR HIGH-VOLUME MINERAL-ADMIXTURED CONCRETE , 2004 .

[5]  V. S. Ramachandran,et al.  Handbook of Analytical Techniques in Concrete Science and Technology: Principles, Techniques and Applications , 2000 .

[6]  Michael D.A. Thomas,et al.  DURABILITY OF TERNARY BLEND CONCRETE WITH SILICA FUME AND BLAST-FURNACE SLAG: LABORATORY AND OUTDOOR EXPOSURE SITE STUDIES , 2002 .

[7]  J. Escalante,et al.  Reactivity of blast-furnace slag in Portland cement blends hydrated under different conditions , 2001 .

[8]  M. Cyr,et al.  Mineral Admixtures in Mortars. Quantification of the Physical Effects of Inert Materials on Short-Term Hydration , 2005 .

[9]  R. L. Sharma,et al.  Influence of mineral additives on the hydration characteristics of ordinary Portland cement , 1999 .

[10]  Lu,et al.  Effect Of Curing Conditions OnFreeze-thaw De-icing Salt Resistance OfBlast Furnace Slag Cement Mortars , 2004 .

[11]  Dale P. Bentz,et al.  Influence of Water-to-Cement Ratio on Hydration Kinetics: Simple Models Based on Spatial Considerations , 2006 .

[12]  Erick Ringot,et al.  Mineral Admixtures in Mortars Effect of Type, Amount and Fineness of Fine Constituents on Compressive Strength , 2005 .

[13]  Paul E. Stutzman,et al.  Analysis of CCRL Proficiency Cements 135 and 136 Using CEMHYD3D | NIST , 2000 .

[14]  T. L. Brownyard,et al.  Studies of the Physical Properties of Hardened Portland Cement Paste , 1946 .

[15]  J. J. Brooks,et al.  Effect of silica fume on mechanical properties of high-strength concrete , 2004 .

[16]  G. K. Moir,et al.  Degrees of reaction of the slag in some blends with Portland cements , 1996 .

[17]  I. Afrani,et al.  The Effects of Different Cementing Materials and Curing on Concrete Scaling , 1994 .

[18]  W. Butler.  Durable Concrete Containing Three or Four Cementitious Materials , 1997, SP-170: Fourth CANMET/ACI International Conference on Durability of Concrete.

[19]  Pk Mehta,et al.  Materials Science of Concrete II , 1992 .