Plasma-assisted Pt and Pt–Pd nano-particles deposition on carbon carriers for application in PEM electrochemical cells

Abstract Plasma-assisted deposition of platinum and platinum-palladium nano-particles at the surface of carbonaceous electronic carriers for application in proton-exchange membrane (PEM) electrochemical cells has been carried out using a conventional DC magnetron sputtering system. Different types of carrier have been used for that purpose: carbon powder (Vulcan XC-72), carbon nanotubes and carbon nano-fibers. The interest of initial chemical pretreatment or metallization of the electronic carrier to improve surface adhesion of catalyst nano-particles has been analyzed. Nanostructured catalytic powders thus obtained have been analyzed and characterized using TGA, SEM, TEM, XRD, XRF and cyclic voltammetry. The electrochemical performances of Pt/C and Pt–Pd/C electrodes have been measured in single-cell PEM fuel cell (PEMFC), water electrolyzer (PEMWE) and unitized regenerative fuel cell (URFC). Results show a high active surface area (up to 44 m 2  g −1 ) and high electrochemical activity for a number of synthesized samples. A qualitative correlation has been established between sputtering parameters, type of carbon carrier and performances as electrocatalyst.

[1]  Tor Oskar Saetre,et al.  Design and characterization of bi-functional electrocatalytic layers for application in PEM unitized regenerative fuel cells , 2010 .

[2]  S. Grigoriev,et al.  Evaluation of carbon-supported Pt and Pd nanoparticles for the hydrogen evolution reaction in PEM water electrolysers , 2008 .

[3]  U. V. Varadaraju,et al.  Nitrogen containing carbon nanotubes as supports for Pt – Alternate anodes for fuel cell applications , 2005 .

[4]  E. Antolini.  Carbon supports for low-temperature fuel cell catalysts , 2009 .

[5]  A. Scaroni,et al.  The influence of surface functionality on the activity of carbon-supported catalysts , 1986 .

[6]  L. Petrik,et al.  Hall Measurements on Carbon Nanotube Paper Modified With Electroless Deposited Platinum , 2009, Nanoscale research letters.

[7]  E. Serra,et al.  Sputter deposition of Pt nanoclusters and thin films on PEM fuel cell electrodes , 2005 .

[8]  S. Grigoriev,et al.  Platinum and palladium nano-particles supported by graphitic nano-fibers as catalysts for PEM water electrolysis , 2011 .

[9]  Pierre Millet,et al.  Development and preliminary testing of a unitized regenerative fuel cell based on PEM technology , 2011 .

[10]  S. Grigoriev,et al.  Characterization of carbon-supported platinum nano-particles synthesized using magnetron sputtering for application in PEM electrochemical systems , 2013 .

[11]  S. Grigoriev,et al.  On the possibility of replacement of Pt by Pd in a hydrogen electrode of PEM fuel cells , 2007 .

[12]  S. Grigoriev,et al.  The performance and degradation of Pt electrocatalysts on novel carbon carriers for PEMFC applications , 2010 .

[13]  Edson A. Ticianelli,et al.  Electrocatalysis on Noble Metal and Noble Metal Alloys Dispersed on High Surface Area Carbon , 2003 .

[14]  Hee‐Tak Kim,et al.  Platinum-sputtered electrode based on blend of carbon nanotubes and carbon black for polymer electrolyte fuel cell , 2008 .

[15]  Jin-Nam Park,et al.  Preparation of platinum-based electrode catalysts for low temperature fuel cell , 2003 .