MHD Modeling of the Tip-to-Plane Plasma Arc Behaviour at Very High Pressure in CF4

[1]  D. Ramjugernath,et al.  Investigation of tetrafluoromethane as a plasma gas in a very high pressure/low current dc batch reactor by means of 3D MHD modelling , 2013 .

[2]  D. Ramjugernath,et al.  3D magnetohydrodynamic modelling of a dc low-current plasma arc batch reactor at very high pressure in helium , 2013 .

[3]  François Cauneau,et al.  3D Unsteady State MHD Modeling of a 3-Phase AC Hot Graphite Electrodes Plasma Torch , 2013, Plasma Chemistry and Plasma Processing.

[4]  Yi Wu,et al.  Theoretical computation of thermophysical properties of high-temperature F2, CF4, C2F2, C2F4, C2F6, C3F6 and C3F8 plasmas , 2012 .

[5]  F. Cauneau,et al.  3D MHD modelling of low current–high voltage dc plasma torch under restrike mode , 2012 .

[6]  J. W. Spencer,et al.  Transport coefficients of high temperature CF4, C2F6, and C3F8 as candidate of SF6 , 2011, 2011 1st International Conference on Electric Power Equipment - Switching Technology.

[7]  F. Fabry,et al.  Experimental Study of Hydrocarbons Synthesis from Syngas by a Tip–Tip Electrical Discharge at Very High Pressure , 2011 .

[8]  Laurent Fulcheri,et al.  Three-Dimensional Unsteady MHD Modeling of a Low-Current High-Voltage Nontransferred DC Plasma Torch Operating With Air , 2011, IEEE Transactions on Plasma Science.

[9]  C. Oehr,et al.  Analysis and Modeling of Gas-Phase Processes in a CHF3/Ar Discharge , 2011 .

[10]  盛宏至,et al.  Numerical Simulation of Fluid Flow and Heat Transfer in a DC Non-Transferred Arc Plasma Torch Operating Under Laminar and Turbulent Conditions , 2011 .

[11]  Anthony B. Murphy,et al.  The effects of metal vapour in arc welding , 2010 .

[12]  Joseph Yan,et al.  Three-dimensional modelling of a dc arc plasma in a twin-torch system , 2010 .

[13]  F. Fabry,et al.  Experimental electrical characterization of a low-current tip–tip arc discharge in helium atmosphere at very high pressure , 2010 .

[14]  Yasunori Tanaka Thermally and chemically non-equilibrium modelling of Ar–N2–H2 inductively coupled plasmas at reduced pressure , 2009 .

[15]  K. Sreekumar,et al.  Three-Dimensional Numerical Modeling of an Ar-N2 Plasma Arc Inside a Non-Transferred Torch , 2009 .

[16]  K. S. Klopovskiy,et al.  Experimental and Theoretical Studies of Radical Production in RF CCP Discharge at 81-MHz Frequency in $\hbox{Ar/CF}_{4}$ and $\hbox{Ar/CHF}_{3}$ Mixtures , 2009, IEEE Transactions on Plasma Science.

[17]  J. Heberlein,et al.  Arc Plasma Torch Modeling , 2009, 1301.0650.

[18]  Shinichi Tashiro,et al.  Numerical simulation of argon twin torch plasma arc for high heating efficiency , 2008 .

[19]  J. González-Aguilar,et al.  Electrode sheath model for an argon free burning arc discharge at very high pressure and low intensity , 2008, 2008 IEEE 35th International Conference on Plasma Science.

[20]  J. González-Aguilar,et al.  Theoretical and experimental study of an argon free burning arc dicharge at very high-pressure and low-intensity , 2008, 2008 IEEE 35th International Conference on Plasma Science.

[21]  E. Pfender,et al.  Two-Dimensional Numerical Modeling of Direct-Current Electric Arcs in Nonequilibrium , 2008 .

[22]  E. Pfender,et al.  Non-equilibrium modelling of arc plasma torches , 2007, 1301.0651.

[23]  E. Pfender,et al.  Three Dimensional Modeling of the Plasma Spray Process , 2007 .

[24]  A. Lunk,et al.  Spectroscopic Diagnostics of DBD Remote Plasma in Ar/Fluorocarbon Mixtures—Correlation Between Plasma Parameters and Thin Film Properties , 2007 .

[25]  J. González-Aguilar,et al.  Design and electrical charaterization of a low current–high voltage compact arc plasma torch , 2007 .

[26]  E. Moreau,et al.  Modeling the restrike mode operation of a DC plasma spray torch , 2006, International Thermal Spray Conference.

[27]  Adam Szafranski,et al.  Arc plasma torch modelling , 2006, Symposium on Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments (WILGA).

[28]  Pierre Freton,et al.  Thermal plasma modelling , 2005 .

[29]  W. R. Dolbier,et al.  Fluorine chemistry at the millennium , 2005 .

[30]  Pierre Freton,et al.  Numerical modelling of an electric arc and its interaction with the anode: part II. The three-dimensional model—influence of external forces on the arc column , 2005 .

[31]  U. Kogelschatz Atmospheric-pressure plasma technology , 2004 .

[32]  F. Archambeau,et al.  Code Saturne: A Finite Volume Code for the computation of turbulent incompressible flows - Industrial Applications , 2004 .

[33]  A. Douce,et al.  Numerical Modelling of an Anodic Metal Bath Heated with an Argon Transferred Arc , 2003 .

[34]  Pierre Proulx,et al.  Three-dimensional numerical modelling of a magnetically deflected dc transferred arc in argon , 2003 .

[35]  G. B. Rulev,et al.  Kinetics of the reactions involving CF2 and CF in a pure tetrafluoromethane plasma: I. Production of CF2 and CF via electron-impact dissociation , 2002 .

[36]  Pierre Freton,et al.  Comparison between a two- and a three-dimensional arc plasma configuration , 2000 .

[37]  G. Zissis,et al.  EXPERIMENTAL INVESTIGATION OF DEVIATIONS FROM LOCAL THERMODYNAMIC EQUILIBRIUM IN HIGH-PRESSURE MERCURY DISCHARGES , 1999 .

[38]  B. H. Crichton,et al.  Gas discharge physics , 1996 .

[39]  O. Simonin,et al.  Three-dimensional modelling of unsteady high-pressure arcs in argon , 1995 .

[40]  Iu. P. Raizer Gas Discharge Physics , 1991 .

[41]  S. Colson,et al.  Measurements of F*, CF, and CF2 formation and decay in pulsed fluorocarbon discharges , 1988 .

[42]  I. C. Plumb,et al.  A model of the chemical processes occurring in CF4/O2 discharges used in plasma etching , 1986 .

[43]  R. D'agostino,et al.  Diagnostics and decomposition mechanism in radio-frequency discharges of fluorocarbons utilized for plasma etching or polymerization , 1982 .

[44]  Vincent M. Donnelly,et al.  The design of plasma etchants , 1981 .

[45]  D. Flamm Mechanisms of radical production in CF3Cl, CF3Br, and related plasma etching gases: The role of added oxidants , 1981 .

[46]  D. Flamm Mechanisms of radical production in radiofrequency discharges of CF3Cl, CF3Br, and certain other plasma etchants: Spectrum of a transient species , 1980 .

[47]  G. Smolinsky,et al.  The effect of added hydrogen on the rf discharge chemistry of CF4, CF3H, and C2F6 , 1979 .

[48]  R. Baddour,et al.  Production of Tetrafluoroethylene by Reaction of Carbon with Carbon Tetrafluoride in Electric Arc , 1965 .

[49]  C. Coddet,et al.  Modeling of the Plasma Flow and Anode Region Inside a Direct Current Plasma Gun , 2011 .

[50]  S. Y. Lu,et al.  Modeling of axis-symmetric steam plasma flow in a non-transferred torch , 2011, Comput. Phys. Commun..

[51]  L. Fulcheri,et al.  ELECTRICAL CHARACTERISATION OF VERY HIGH PRESSURE Ar/H2 LOW CURRENT ARC DISCHARGE , 2009 .

[52]  M. Abbaoui,et al.  NUMERICAL MODELING OF A DC NON-TRANSFERRED PLASMA TORCH: MOVEMENT OF THE ARC ANODE ATTACHMENT AND RESULTING ANODE EROSION , 2005 .

[53]  J. Roth Industrial Plasma Engineering , 1995 .

[54]  J. K. Lumpp,et al.  Mechanical Properties of CuO , 1990 .