Reliability issues of SiC power MOSFETs toward high junction temperature operation

There still remain a number of reliability problems to be resolved with regard to long-term high junction temperature operation of SiC power devices because at present they simply follow Si-based technology. In this paper, various reliability issues for power DMOS devices on 4H-SiC operated at a junction temperature of more than 200 °C are extensively discussed in terms of five manifest problems and potential treats: (1) interlayer dielectric erosion, (2) Al spearing, (3) Ni2Si contact disappearance, (4) electrode delamination, and (5) gate time-dependent dielectric breakdown. Preventive measures for these issues are proposed, including the use of a Ta/TaN barrier metal, a SiCH barrier dielectric, decarbonised Ni2Si and an ONO gate dielectric, and their effectiveness is experimentally verified. A viable device structure and fabrication process that successfully incorporate these measures are then presented. Finally, a storage life of more than 5380 hours at 300 °C is demonstrated for 1 × 1 mm2 4H-SiC power DMOS devices incorporating selected countermeasures. (© 2009 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)

[1]  S. Yamagami,et al.  Negative Field Reliability of ONO Gate Dielectric on 4H-SiC , 2008 .

[2]  M. Kitabatake,et al.  Normally-Off 1400V/30A 4H-SiC DACFET and its Application to DC-DC Converter , 2008 .

[3]  Kimimori Hamada,et al.  Present status and future prospects for electronics in electric vehicles/hybrid electric vehicles and expectations for wide‐bandgap semiconductor devices , 2008 .

[4]  M. Paisley,et al.  100 mm 4HN-SiC Wafers with Zero Micropipe Density , 2008 .

[5]  H. Okushi,et al.  Gate Oxide with High Dielectric Breakdown Strength after Undergoing a Typical Power MOSFET Fabrication Process , 2003 .

[6]  J. Scofield,et al.  High-Temperature Operation of 50 A (1600 A/cm2), 600 V 4H-SiC Vertical-Channel JFETs for High-Power Applications , 2008 .

[7]  S. Murarka,et al.  Tantalum nitride as a diffusion barrier between Pd2Si or CoSi2 and aluminum , 1989 .

[8]  R. Johnson,et al.  Status of silicon carbide (SiC) as a wide-bandgap semiconductor for high-temperature applications: A review , 1996 .

[9]  E. Janzén,et al.  The Effects of Growth Conditions in Dislocation Density in SiC Epi-Layers Produced by the Sublimation Epitaxy Technique , 1997 .

[10]  K. Fukuda,et al.  Effects of Dislocations on Reliability of Thermal Oxides Grown on n-Type 4H-SiC Wafer , 2005 .

[11]  Jian H. Zhao,et al.  Demonstration of high voltage (600–1300 V), high current (10–140 A), fast recovery 4H-SiC p-i-n/Schottky(MPS) barrier diodes , 2003 .

[12]  G. Y. Robinson,et al.  Aluminum/nickel silicide contacts on silicon , 1978 .

[13]  S. Tanimoto.  Impact of Dislocations on Gate Oxide in SiC MOS Devices and High Reliability ONO Dielectrics , 2006 .

[14]  T. S. Lundy,et al.  Diffusion of Al26 and Mn54 in Aluminum , 1962 .

[15]  R. Singh,et al.  Comparisons of Design and Yield for Large-Area 10-kV 4H-SiC DMOSFETs , 2008, IEEE Transactions on Electron Devices.

[16]  M. Nicolet,et al.  Aluminum contact to nickel silicide using a thin tungsten barrier , 1982 .

[17]  S. Tanimoto,et al.  Critical Reliability Issues for SiC Power MOSFETs Operated at High Temperature , 2007 .