Morphology control in polycarbazole based bulk heterojunction solar cells and its impact on device performance

Incremental increase in dimethyl sulfoxide (or dimethyl formamide) in ortho-dichlorobenzene solution of poly[N-heptadecanyl-2,7-carbazole-alt-5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzothiadiazole)] (PCDTBT) gradually reduces the polymer-solvent interaction, the attraction forces between polymer chains become more dominant, and the polymer chains adopt a tight and contracted conformation with more interchain interactions, resulting in a progressive aggregation in both solutions and films. This was used to fine tune the morphology of PCDTBT/PC71BM based solar cells, leading to improved domain structure and hole mobility in the active layer, and significantly improved photovoltaic performance. The power conversion efficiency increased from 6.0% to 7.1% on devices with an active area of 1.0 cm2.

[1]  Alan J. Heeger,et al.  Charge separation and photovoltaic conversion in polymer composites with internal donor/acceptor heterojunctions , 1995 .

[2]  A J Heeger,et al.  Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols. , 2007, Nature materials.

[3]  Ye Tao,et al.  Highly efficient polycarbazole-based organic photovoltaic devices , 2009 .

[4]  Xiong Gong,et al.  Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology , 2005 .

[5]  Nelson E. Coates,et al.  Bulk heterojunction solar cells with internal quantum efficiency approaching 100 , 2009 .

[6]  David L. Carroll,et al.  High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1- phenyl-(6,6)C61 blends , 2005 .

[7]  Gang Li,et al.  For the Bright Future—Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4% , 2010, Advanced materials.

[8]  Mario Leclerc,et al.  A Low‐Bandgap Poly(2,7‐Carbazole) Derivative for Use in High‐Performance Solar Cells , 2007 .

[9]  Ye Tao,et al.  Charge Transport, Photovoltaic, and Thermoelectric Properties of Poly(2,7‐Carbazole) and Poly(Indolo[3,2‐b]Carbazole) Derivatives , 2008 .

[10]  S. Beaupré,et al.  Highly efficient organic solar cells based on a poly(2,7-carbazole) derivative , 2009 .

[11]  Klaus Meerholz,et al.  Controlling Morphology in Polymer–Fullerene Mixtures , 2008 .

[12]  Daniel Moses,et al.  Method for increasing the photoconductive response in conjugated polymer/fullerene composites , 2006 .

[13]  Niyazi Serdar Sariciftci,et al.  Effects of Postproduction Treatment on Plastic Solar Cells , 2003 .

[14]  Gang Li,et al.  “Solvent Annealing” Effect in Polymer Solar Cells Based on Poly(3‐hexylthiophene) and Methanofullerenes , 2007 .

[15]  Yang Yang,et al.  Polymer solar cells with enhanced open-circuit voltage and efficiency , 2009 .

[16]  J. Hummelen,et al.  Polymer Photovoltaic Cells: Enhanced Efficiencies via a Network of Internal Donor-Acceptor Heterojunctions , 1995, Science.

[17]  Xiong Gong,et al.  New Architecture for High‐Efficiency Polymer Photovoltaic Cells Using Solution‐Based Titanium Oxide as an Optical Spacer , 2006 .