Flow behaviors of a large spout-fluid bed at high pressure and temperature by 3D simulation with kinetic theory of granular flow

Abstract Flow behaviors of a large spout-fluid bed (I.D. 1.0 m) at high pressure and temperature were investigated by Eulerian simulation. The gas phase was modeled with k − e turbulent model and the particle phase was modeled with kinetic theory of granular flow. The development of an internal jet, gas–solid flow patterns, particle concentrations, particle velocities and jet penetration depths at high pressure and temperature at different operating conditions were simulated. The results show that the bed operated at an initial bed height larger than the maximum spoutable bed height resembles the flow patterns of jetting fluidized beds. The radial profiles of particle velocities and concentrations at high temperature and pressure have the similar characteristic shapes to those at ambient pressure and temperature. The particle concentrations and velocities appear to depend on the bed heights when increasing pressure while keeping the gas velocities and temperature constant. The particle velocities in the lower region of the bed increase with increasing pressure, while they tend to decrease in the middle and upper regions of the bed. The particle concentrations have an opposite dependency with increasing pressure. They decrease in the lower region of the bed but increase in the middle and upper regions of the bed. Besides, the jet penetration depths are found to increase with increasing pressure.

[1]  John R. Grace,et al.  Particle velocity profiles and solid flow patterns in spouted beds , 1994 .

[2]  T. E. Base,et al.  Further studies on momentum dissipation of grid jets in a gas fluidized bed , 1971 .

[3]  Yutaka Tsuji,et al.  Activities in discrete particle simulation in Japan , 2000 .

[4]  J. Grace,et al.  Flow regimes and combustion behaviour in coal-burning spouted and spout-fluid beds , 1987 .

[5]  Xiaoping Chen,et al.  Flow pattern and transition of rectangular spout–fluid bed , 2006 .

[6]  V. Swaaij,et al.  Hydrodynamic modeling of dense gas-fluidised beds using the kinetic theory of granular flow: effect of coefficient of restitution on bed dynamics , 2000 .

[7]  Masayuki Horio,et al.  Behavior of particles and bubbles around immersed tubes in a fluidized bed at high temperature and pressure : a DEM simulation , 2001 .

[8]  D. Gidaspow Multiphase Flow and Fluidization: Continuum and Kinetic Theory Descriptions , 1994 .

[9]  R. Xiao,et al.  High-temperature air/steam-blown gasification of coal in a pressurized spout-fluid bed , 2006 .

[10]  Wen-Ching Yang,et al.  Comparison of jetting phenomena in 30-cm and 3-m diameter semicircular fluidized beds , 1998 .

[11]  Zhulin Yuan,et al.  Three-dimensional numerical simulation method for gas–solid injector , 2005 .

[12]  B. Waldie Separation and residence times of larger particles in a spout‐fluid bed , 1992 .

[13]  Dimitri Gidaspow,et al.  Hydrodynamic simulation of gas-solid flow in a riser using kinetic theory of granular flow , 2003 .

[14]  J. Gale,et al.  The british coal spouted fluidised bed gasification process , 1992 .

[15]  A. Neri,et al.  Riser hydrodynamics: Simulation using kinetic theory , 2000 .

[16]  Yc C. Guo,et al.  Numerical modeling of gas–particle flow using a comprehensive kinetic theory with turbulence modulation , 2005 .

[17]  John R. Grace,et al.  Measurements of voidage profiles in spouted beds , 1994 .

[18]  John R. Grace,et al.  Voidage and particle velocity profiles in a spout-fluid bed , 2000 .

[19]  Yan-Long He Spouted bed and spout-fluid bed hydrodynamics in a 0.91 m diameter vessel , 1990 .

[20]  Achim Schmidt,et al.  Numerical prediction of heat transfer in fluidized beds by a kinetic theory of granular flows , 2000 .

[21]  L. Behie,et al.  Jet momentum dissipation at a grid of a large gas fluidized bed , 1970 .

[22]  Xiaoping Chen,et al.  Hydrodynamic characteristics of spout-fluid bed: Pressure drop and minimum spouting/spout-fluidizing velocity , 2006 .

[23]  Y. Duan,et al.  Partial gasification of coal in a fluidized bed reactor: Comparison of a laboratory and pilot scale reactors , 2007 .

[24]  J. Grace,et al.  Spouted, fluidized and spout-fluid bed combustion of bituminous coals , 1988 .

[25]  Mingyao Zhang,et al.  DEM simulation of gas-solid flow behaviors in spout-fluid bed , 2006 .

[26]  J. Kuipers,et al.  Hydrodynamic modelling of dense gas-fluidised beds: comparison and validation of 3D discrete particle and continuum models , 2004 .

[27]  H. Arastoopour,et al.  Simulation of particles and gas flow behavior in the riser section of a circulating fluidized bed using the kinetic theory approach for the particulate phase , 2000 .

[28]  C. Coronella,et al.  CFD simulations of particle mixing in a binary fluidized bed , 2005 .

[29]  Wenqi Zhong,et al.  Characterization of dynamic behavior of a spout-fluid bed with Shannon entropy analysis , 2005 .

[30]  John R. Grace,et al.  Verification and validation of CFD models and dynamic similarity for fluidized beds , 2004 .

[31]  D. Gidaspow,et al.  A bubbling fluidization model using kinetic theory of granular flow , 1990 .

[32]  Rui Xiao,et al.  Solids Circulation Flux and Gas Bypassing in a Pressurized Spout-fluid Bed with a Draft Tube , 2008 .

[33]  Hydrodynamics of pressurized spouted beds , 1998 .

[34]  Wenqi Zhong,et al.  Jet penetration depth in a two-dimensional spout–fluid bed , 2005 .

[35]  John R. Grace,et al.  Hydrodynamics of spout-fluid beds , 1985 .

[36]  T. M. Knowlton,et al.  The Effect of Pressure on Jet Penetration in Semi-Cylindrical Gas-Fluidized Beds , 1980 .