Consistency test of coincidence-summing calculation methods for extended sources.

[1]  Vo Hoang Nguyen,et al.  Validation of an advanced analytical procedure applied to the measurement of environmental radioactivity. , 2018, Journal of environmental radioactivity.

[2]  D. S. Moreira,et al.  SUMCOR: Cascade summing correction for volumetric sources applying MCNP6. , 2017, Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine.

[3]  F. Salvat,et al.  Simulation of decay processes and radiation transport times in radioactivity measurements , 2017 .

[4]  A. Camp,et al.  Equivalence of computer codes for calculation of coincidence summing correction factors - Part II. , 2014, Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine.

[5]  Matej Batic,et al.  Radioactive Decays in Geant4 , 2013, IEEE Transactions on Nuclear Science.

[6]  R. A. Forster,et al.  Initial MCNP6 Release Overview - MCNP6 version 1.0 , 2013 .

[7]  Octavian Sima,et al.  Efficiency Calculation of Gamma Detectors by Monte Carlo Methods , 2012 .

[8]  M. Lépy,et al.  Coincidence summing corrections applied to volume sources. , 2012, Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine.

[9]  P. Dryák,et al.  Correction of the TRUE summations in volume sources. , 2012, Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine.

[10]  T. T. Thanh,et al.  Intercomparison of methods for coincidence summing corrections in gamma-ray spectrometry--part II (volume sources). , 2012, Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine.

[11]  G. Kanisch,et al.  Calculation of true coincidence summing corrections for extended sources with EFFTRAN. , 2011, Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine.

[12]  G. Kanisch,et al.  Intrinsic error of the point-source and the LS-curve approximations in treatment of true coincidence summing. , 2010, Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine.

[13]  T. T. Thanh,et al.  Intercomparison of methods for coincidence summing corrections in gamma-ray spectrometry. , 2010, Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine.

[14]  R. Venkataraman,et al.  X-ray true coincidence summing correction in Genie 2000. , 2009, Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine.

[15]  D. Arnold,et al.  A tool for processing decay scheme data that encompasses coincidence summing calculations. , 2008, Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine.

[16]  D. Arnold,et al.  Calculation of coincidence summing corrections for X-ray peaks and for sum peaks with X-ray contributions. , 2006, Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine.

[17]  S. Incerti,et al.  Geant4 developments and applications , 2006, IEEE Transactions on Nuclear Science.

[18]  M. Korun,et al.  Calculation of ¿LS-curves¿ for coincidence summing corrections in gamma ray spectrometry , 2006 .

[19]  A. Likar,et al.  Calculation of total efficiencies of extended samples for HPGe detectors , 2005 .

[20]  T. Vidmar.  EFFTRAN : A Monte Carlo efficiency transfer code for gamma-ray spectrometry , 2005 .

[21]  Rafael García-Tenorio,et al.  GEANT4 code for simulation of a germanium gamma-ray detector and its application to efficiency calibration , 2004 .

[22]  D. Arnold,et al.  Application of GESPECOR software for the calculation of coincidence summing effects in special cases. , 2004, Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine.

[23]  S. Gelsema,et al.  Cascade summing in gamma-ray spectrometry in marinelli-beaker geometries: the third efficiency curve , 2003 .

[24]  M. Lipoglavšek,et al.  A physically founded model of the efficiency curve in gamma-ray spectrometry , 2001 .

[25]  Dirk Arnold,et al.  GESPECOR: A versatile tool in gamma-ray spectrometry , 2001 .

[26]  D. Arnold,et al.  Total versus effective total efficiency in the computation of coincidence summing corrections in gamma-ray spectrometry of volume sources , 2001 .

[27]  Arnold,et al.  Accurate computation of coincidence summing corrections in low level gamma-ray spectrometry , 2000, Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine.

[28]  V. P. Kolotov,et al.  Estimation of true coincidence corrections for voluminous sources , 1996 .

[29]  D. Arnold,et al.  Self-attenuation and coincidence-summing corrections calculated by Monte Carlo simulations for gamma-spectrometric measurements with well-type germanium detectors , 1996 .

[30]  Gordon R. Gilmore,et al.  Practical Gamma-Ray Spectrometry , 1995 .

[31]  P. Parekh,et al.  Coincidence summing in gamma-ray spectroscopy , 1990 .

[32]  K. Debertin,et al.  Gamma- and X-Ray Spectrometry with Semiconductor Detectors , 1988 .

[33]  M. Hult,et al.  Equivalence of computer codes for calculation of coincidence summing correction factors. , 2014, Applied Radiation and Isotopes.

[34]  A. Dell'Acqua,et al.  Geant4—a simulation toolkit , 2003 .

[35]  S. Sudár.  'TrueCoinc' software utility for calculation of the true coincidence correction , 2002 .