Influence of Perforated Fin on Flow Characteristics and Thermal Performance in Spiral Finned-Tube Heat Exchanger

The present study conducts the numerical investigation of flow characteristics and thermal performance of spiral finned-tube heat exchangers. The effects of location of perforations (90°, 120°, and 150°) on heat transfer and pressure drop are analyzed for the air-side. The commercial computational fluid dynamics code ANSYS Fluent (V.17.0) is used for simulations with the RNG k-e model based on the Reynolds-averaged Navier–Stokes equations. The velocity field, Colburn j-factor, and friction factor are analyzed to evaluate the heat transfer and pressure drop characteristics. Because of the flow through the perforations, the boundary layers on the fin surfaces are interrupted. This results in increased flow disturbances close to the fin, and the heat transfer performance increases compared to the reference case. The pressure drop, which is one of the disadvantages of spiral finned tubes comparing to plate or circular fins, decreases with perforations on the fin. Overall, the cases with perforated fin exhibit greater performance of area goodness factor considering the relationship between the heat transfer and the pressure drop.

[1]  S. Kakaç,et al.  Heat Exchangers: Selection, Rating, and Thermal Design , 1997 .

[2]  W. Vicente,et al.  Numerical simulation of turbulent air flow on a single isolated finned tube module with periodic boundary conditions , 2015 .

[3]  R. Shah,et al.  Laminar Flow Forced Convection in Ducts: A Source Book for Compact Heat Exchanger Analytical Data , 2014 .

[4]  S. Kakaç,et al.  Heat Exchangers: Selection, Rating, and Thermal Design , 1997 .

[5]  Daniel Livescu,et al.  Turbulence structure behind the shock in canonical shock–vortical turbulence interaction , 2014, Journal of Fluid Mechanics.

[6]  T. Kiatsiriroat,et al.  Air side performance at low Reynolds number of cross-flow heat exchanger using crimped spiral fins , 2005 .

[7]  Sanjiva K. Lele,et al.  Study of supersonic wave components in high-speed turbulent jets using an LES database , 2014 .

[8]  Nikolaos V. Sahinidis,et al.  A Machine Learning Approach to Correlation Development Applied to Fin-Tube Bundle Heat Exchangers , 2018, Energies.

[9]  Somchai Wongwises,et al.  Heat transfer and flow characteristics of spiral fin-and-tube heat exchangers: A review , 2014 .

[10]  U. Gross,et al.  Numerical study of fin-spacing effects in annular-finned tube heat exchangers , 2004 .

[11]  Wonjin Jin.  Numerical Investigation of Icing Effects on Dynamic Inlet Distortion , 2018 .

[12]  Kiyoshi Kawaguchi,et al.  The heat transfer and pressure drop characteristics of finned tube banks in forced convection (comparison of the pressure drop characteristics of spiral fins and serrated fins) , 2004 .

[13]  Young I Cho,et al.  Improvement of heat transfer with perforated circular holes in finned tubes of air-cooled heat exchanger , 2012 .

[14]  R. Hofmann,et al.  Heat Transfer and Pressure Drop Performance Comparison of Finned-Tube Bundles in Forced Convection , 2008 .

[15]  Jianlin Yu,et al.  A numerical study on the air-side heat transfer of perforated finned-tube heat exchangers with large fin pitches , 2016 .

[16]  Cao Wei-wu,et al.  Experimental Investigation of Heat Transfer and Flowing Resistance for Air Flow Cross over Spiral Finned Tube Heat Exchanger , 2012 .

[17]  Chi-Chuan Wang,et al.  Compound Heat Transfer Enhancement of Wavy Fin-and-Tube Heat Exchangers through Boundary Layer Restarting and Swirled Flow , 2018, Energies.

[18]  S. Kakaç,et al.  Heat transfer enhancement of heat exchangers , 1999 .

[19]  Antonio Delgado,et al.  Numerical investigations for the optimization of serrated finned-tube heat exchangers , 2011 .

[20]  J. Joshi,et al.  A comparison of thermal-hydraulic performance of various fin patterns using 3D CFD simulations , 2017 .

[21]  Chi-Chuan Wang,et al.  Flow visualization of annular and delta winlet vortex generators in fin-and-tube heat exchanger application , 2002 .

[22]  Sarah Rothstein.  Fundamentals Of Heat Exchanger Design , 2016 .

[23]  S. Wongwises,et al.  Effect of fin pitches on the air-side performance of crimped spiral fin-and-tube heat exchangers with a multipass parallel and counter cross-flow configuration , 2011 .

[24]  S. Wongwises,et al.  Effect of fin pitches on the air-side performance of L-footed spiral fin-and-tube heat exchangers , 2013 .

[25]  E. Martínez-Espinosa,et al.  Numerical Analysis for Saving Fin Material in Helical Segmented-Tubes , 2017 .

[26]  Yan Huang,et al.  Experimental investigation of heat transfer and pressure drop in serrated finned tube banks with staggered layouts , 2012 .

[27]  Srbislav Genić,et al.  Research on air pressure drop in helically-finned tube heat exchangers , 2006 .

[28]  Three-dimensional turbulent flow and heat transfer characteristics of longitudinal vortices embedded in turbulent boundary layer in bent channels , 2018 .

[29]  Wen-Quan Tao,et al.  3D numerical simulation on shell-and-tube heat exchangers with middle-overlapped helical baffles and continuous baffles – Part II: Simulation results of periodic model and comparison between continuous and noncontinuous helical baffles , 2009 .

[30]  Sang Hun Lee,et al.  Frost growth characteristics of spirally-coiled circular fin-tube heat exchangers under frosting conditions , 2013 .

[31]  Yongchan Kim,et al.  Air-side heat transfer characteristics of spiral-type circular fin-tube heat exchangers , 2010 .