A PEM Fuel-Cell Model Featuring Oxygen-Excess-Ratio Estimation and Power-Electronics Interaction

In this paper, a polymer-electrolyte-membrane fuel-cell (FC) model that is useful for simulation and control purposes is presented. The model uses both electrical-circuit components and functional blocks to reproduce both static and dynamic FC behaviors. Its main feature is in the reproduction of the oxygen-excess-ratio behavior, but it is also able to interact with any electrical device connected at the FC terminals, e.g., a load or a switching converter. Consequently, the proposed model can be used to develop new control strategies aimed at avoiding the oxygen-starvation effect and/or minimizing the fuel consumption. The model has been customized for a Ballard Nexa 1.2-kW power system, and this has allowed an experimental validation by means of measurements performed on a real FC device.

[1]  A.G. Stefanopoulou,et al.  Control of fuel cell breathing , 2004, IEEE Control Systems.

[2]  Anna G. Stefanopoulou,et al.  Control of Fuel Cell Power Systems , 2004 .

[3]  B. Wahdame,et al.  Analysis of a Fuel Cell Durability Test Based on Design of Experiment Approach , 2008, IEEE Transactions on Energy Conversion.

[4]  Prasad N. Enjeti,et al.  Design of a wide input range DC-DC converter with a robust power control scheme suitable for fuel cell power conversion , 2004, Nineteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2004. APEC '04..

[5]  Anna G. Stefanopoulou,et al.  Performance Limitations of Air Flow Control in Power-Autonomous Fuel Cell Systems , 2007, IEEE Transactions on Control Systems Technology.

[6]  Daniel R. Lewin,et al.  Model-based control of fuel cells (2): Optimal efficiency , 2007 .

[7]  Daniel Hissel,et al.  Non Linear State Space Modelling of a PEMFC , 2006 .

[8]  S. Yuvarajan,et al.  A novel circuit model for PEM fuel cells , 2004, Nineteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2004. APEC '04..

[9]  Raghunathan Rengaswamy,et al.  Solid Oxide Fuel Cell Modeling , 2009, IEEE Transactions on Industrial Electronics.

[10]  Anna G. Stefanopoulou,et al.  Current Management in a Hybrid Fuel Cell Power System: A Model-Predictive Control Approach , 2006, IEEE Transactions on Control Systems Technology.

[11]  Jung-Min Kwon,et al.  High-Efficiency Fuel Cell Power Conditioning System With Input Current Ripple Reduction , 2009, IEEE Transactions on Industrial Electronics.

[12]  P. R. Bevington,et al.  Data Reduction and Error Analysis for the Physical Sciences , 1969 .

[13]  K.J. Runtz,et al.  Fuel cell equivalent circuit models for passive mode testing and dynamic mode design , 2005, Canadian Conference on Electrical and Computer Engineering, 2005..

[14]  Daniel Hissel,et al.  Energy-Management Strategy for Embedded Fuel-Cell Systems Using Fuzzy Logic , 2007, IEEE Transactions on Industrial Electronics.

[15]  Phatiphat Thounthong,et al.  Control Strategy of Fuel Cell and Supercapacitors Association for a Distributed Generation System , 2007, IEEE Transactions on Industrial Electronics.

[16]  J.R.J. Larminie.  Current interrupt techniques for circuit modelling , 1994 .

[17]  Daniel Hissel,et al.  A New Modeling Approach of Embedded Fuel-Cell Power Generators Based on Artificial Neural Network , 2008, IEEE Transactions on Industrial Electronics.

[18]  Mohammad Tariq Iqbal,et al.  Modelling and Analysis of Electro‐chemical, Thermal, and Reactant Flow Dynamics for a PEM Fuel Cell System , 2005 .

[19]  Daniel R. Lewin,et al.  Model-based Control of Fuel Cells: (1) Regulatory Control , 2004 .

[20]  Xinbo Ruan,et al.  A Hybrid Fuel Cell Power System , 2009, IEEE Transactions on Industrial Electronics.

[21]  Carlos Andrés Ramos-Paja,et al.  Minimum Fuel Consumption Strategy for PEM Fuel Cells , 2009, IEEE Transactions on Industrial Electronics.

[22]  C. Bordons,et al.  Constrained predictive control strategies for PEM fuel cells , 2006, 2006 American Control Conference.

[23]  Jorge L. Duarte,et al.  Line-Interactive UPS Using a Fuel Cell as the Primary Source , 2008, IEEE Transactions on Industrial Electronics.

[24]  X. D. Xue,et al.  Unified mathematical modelling of steady-state and dynamic voltage–current characteristics for PEM fuel cells , 2006 .

[25]  C. Bordons,et al.  Development and experimental validation of a PEM fuel cell dynamic model , 2007 .

[26]  Anna G. Stefanopoulou,et al.  Control of Fuel Cell Power Systems: Principles, Modeling, Analysis and Feedback Design , 2004 .

[27]  Prasad N. Enjeti,et al.  Analysis of Common-Mode Voltage in Utility-Interactive Fuel Cell Power Conditioners , 2009, IEEE Transactions on Industrial Electronics.

[28]  Luciane Neves Canha,et al.  An electrochemical-based fuel-cell model suitable for electrical engineering automation approach , 2004, IEEE Transactions on Industrial Electronics.

[29]  Carlos Bordons,et al.  Constrained explicit predictive control strategies for PEM fuel cell systems , 2007, 2007 46th IEEE Conference on Decision and Control.

[30]  Stephen Ogaji,et al.  Modelling fuel cell performance using artificial intelligence , 2006 .

[31]  D. Hissel,et al.  Fuel cell fault diagnosis: A stochastic approach , 2006, 2006 IEEE International Symposium on Industrial Electronics.

[32]  Jong-Woo Ahn,et al.  Integrated modeling and control of a PEM fuel cell power system with a PWM DC/DC converter , 2007 .

[33]  P. Famouri,et al.  Electrochemical circuit model of a PEM fuel cell , 2003, 2003 IEEE Power Engineering Society General Meeting (IEEE Cat. No.03CH37491).

[34]  Marco Sorrentino,et al.  Modeling and Analysis of Transient Behavior of Polymer Electrolyte Membrane Fuel Cell Hybrid Vehicles , 2007 .

[35]  Mohammad Tariq Iqbal,et al.  Dynamic Modelling and Simulation of a Fuel Cell Generator , 2005 .