IPMSM for hybrid electric vehicle using DSP based three-level diode clamped inverter

Electric Propulsion Systems (EPS) are the vital components of the Hybrid Electric Vehicles (HEV). They comprise of Electronic Controller, Power Converter and Electric Motor. The essential attributes of electric motors used in HEV are high power density, high starting torque, wide range of speed control, high efficiency, good reliability and robustness. Permanent Magnet Synchronous Motors (PMSM) have these characteristics which offer best suitability to HEV's. This paper presents the implementation of three-phase three-level diode-clamped inverter whose output is given to 3-phase, 4-pole, 400V, 50Hz, 0.45 KW, 1500RPM, Interior PMSM. DSP TMS320f28335 Controller is used. The performance of IPMSM is analyzed using different modulation techniques for three-level diode clamped inverter. DC Generator is coupled with IPMSM for analyzing its performance characteristics.

[1]  Janne Nerg,et al.  Direct-Driven Interior Magnet Permanent-Magnet Synchronous Motors for a Full Electric Sports Car , 2014, IEEE Transactions on Industrial Electronics.

[2]  Ali Emadi,et al.  Modern electric, hybrid electric, and fuel cell vehicles : fundamentals, theory, and design , 2009 .

[3]  Zhi Yang,et al.  Comparative Study of Interior Permanent Magnet, Induction, and Switched Reluctance Motor Drives for EV and HEV Applications , 2015, IEEE Transactions on Transportation Electrification.

[4]  G. Sree Lakshmi,et al.  Energy efficient IPMSM drive with three-level Diode Clamped Inverter using DSP , 2016, 2016 International Conference on Energy Efficient Technologies for Sustainability (ICEETS).

[5]  Abolfazl Vahedi,et al.  Study on interior permanent magnet synchronous motors for hybrid electric vehicle traction drive application considering permanent magnet type and temperature , 2014 .

[6]  Massimo Barcaro,et al.  PM Motors for Hybrid Electric Vehicles , 2009 .

[7]  Long Li.  DSP based digital control system implementation of permanent magnet synchronous motor , 2014, The 26th Chinese Control and Decision Conference (2014 CCDC).

[8]  P. Vinod Kumar,et al.  Field Oriented Control of IPMSM using diode-clamped multilevel inverter , 2015, 2015 International Conference on Power and Advanced Control Engineering (ICPACE).

[9]  Christopher H. Onder,et al.  Modeling and Control of a Hybrid Electric Vehicle With an Electrically Assisted Turbocharger , 2016, IEEE Transactions on Vehicular Technology.

[10]  G. Tulasi Ram Das,et al.  SIMULATION ANALYSIS OF IPMSM WITH THREE & FIVE LEVEL DCML INVERTER USING CBSVPWM TECHNIQUE , 2013 .

[11]  Pragasen Pillay,et al.  A performance comparison study of space-vector and carrier-based PWM techniques for a 3-level neutral point clamped (NPC) traction inverter drive , 2014, 2014 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES).

[12]  Yasemin Onal,et al.  DSP based embedded code generation for PMSM using sliding mode controller , 2014, 2014 16th International Power Electronics and Motion Control Conference and Exposition.

[13]  Hao Chen,et al.  Research on the Performances and Parameters of Interior PMSM Used for Electric Vehicles , 2016, IEEE Transactions on Industrial Electronics.

[14]  Eiji Sato.  Permanent magnet synchronous motor drives for hybrid electric vehicles , 2007 .