Applying viscoplastic constitutive models to predict ratcheting behavior of sintered nanosilver lap-shear joint

[1]  Y. Lin,et al.  Investigation of uniaxial low-cycle fatigue failure behavior of hot-rolled AZ91 magnesium alloy , 2013 .

[2]  Xu Chen,et al.  High temperature ratcheting behavior of nano-silver paste sintered lap shear joint under cyclic shear force , 2013, Microelectron. Reliab..

[3]  G. Lu,et al.  Transient Thermal Impedance Measurements on Low-Temperature-Sintered Nanoscale Silver Joints , 2012, Journal of Electronic Materials.

[4]  Xu Chen,et al.  Effect of joint sizes of low-temperature sintered nano-silver on thermal residual curvature of sandwiched assembly , 2012 .

[5]  Xin Li,et al.  Mechanical property evaluation of nano‐silver paste sintered joint using lap‐shear test , 2012 .

[6]  C. Buttay,et al.  Evaluation of silver-sintering die attach , 2012, 2012 7th International Conference on Integrated Power Electronics Systems (CIPS).

[7]  Tao Wang,et al.  Transient Thermal Performance of IGBT Power Modules Attached by Low-Temperature Sintered Nanosilver , 2012, IEEE Transactions on Device and Materials Reliability.

[8]  Weiwei Yu,et al.  Visco-plastic constitutive modeling on Ohno–Wang kinematic hardening rule for uniaxial ratcheting behavior of Z2CND18.12N steel , 2012 .

[9]  G. Lu,et al.  Investigation of Post-Etch Copper Residue on Direct Bonded Copper (DBC) Substrates , 2011 .

[10]  Y. C. Lin,et al.  Uniaxial ratcheting and low-cycle fatigue failure behaviors of AZ91D magnesium alloy under cyclic tension deformation , 2011 .

[11]  Xu Chen,et al.  Migration of Sintered Nanosilver Die-Attach Material on Alumina Substrate Between 250 $^{\circ}\hbox{C}$ and 400 $^{ \circ}\hbox{C}$ in Dry Air , 2011, IEEE Transactions on Device and Materials Reliability.

[12]  Jun Zhang,et al.  Uniaxial ratchetting behavior of anisotropic conductive adhesive film under cyclic tension , 2011 .

[13]  Tao Wang,et al.  Uniaxial ratcheting and fatigue behaviors of low-temperature sintered nano-scale silver paste at room and high temperatures , 2010 .

[14]  Xu Chen,et al.  Applying Anand model to low-temperature sintered nanoscale silver paste chip attachment , 2009 .

[15]  M. Abdel-Karim,et al.  Modified kinematic hardening rules for simulations of ratchetting , 2009 .

[16]  Jun Ding,et al.  Uniaxial ratcheting and fatigue failure of tempered 42CrMo steel : Damage evolution and damage-coupled visco-plastic constitutive model , 2009 .

[17]  Hong Gao,et al.  Simulation of uniaxial tensile properties for lead-free solders with modified Anand model , 2009 .

[18]  K. Nakane,et al.  Thermal ratcheting of solder-bonded elastic and elastoplastic layers , 2008 .

[19]  Xu Chen,et al.  Tensile Behaviors and Ratcheting Effects of Partially Sintered Chip-Attachment Films of a Nanoscale Silver Paste , 2008 .

[20]  Tomomi Otani,et al.  Effect of ratcheting deformation on fatigue and creep-fatigue life of 316FR stainless steel , 2008 .

[21]  Tao Wang,et al.  Low-Temperature Sintering with Nano-Silver Paste in Die-Attached Interconnection , 2007 .

[22]  G. Tao,et al.  Ratcheting behavior of an epoxy polymer and its effect on fatigue life , 2007 .

[23]  Guozheng Kang,et al.  Constitutive Modeling for Uniaxial Time-Dependent Ratcheting of SS304 Stainless Steel , 2007 .

[24]  G. Kang,et al.  Experimental study on ratchetting-fatigue interaction of SS304 stainless steel in uniaxial cyclic stressing , 2006 .

[25]  Guo-Quan Lu,et al.  Thermomechanical Reliability of Low-Temperature Sintered Silver Die Attached SiC Power Device Assembly , 2006, IEEE Transactions on Device and Materials Reliability.

[26]  Guo-Quan Lu,et al.  Low-Temperature Sintered Nanoscale Silver as a Novel Semiconductor Device-Metallized Substrate Interconnect Material , 2006, IEEE Transactions on Components and Packaging Technologies.

[27]  S. Kwofie,et al.  Cyclic creep of copper due to axial cyclic and tensile mean stresses , 2006 .

[28]  Xu Chen,et al.  Experimental study on ratcheting behavior of eutectic tin–lead solder under multiaxial loading , 2005 .

[29]  Guozheng Kang,et al.  Finite element implementation of visco‐plastic constitutive model with strain‐range‐dependent cyclic hardening , 2005 .

[30]  Xu Chen,et al.  Prediction of stress-strain relationship with an improved Anand constitutive Model For lead-free solder Sn-3.5Ag , 2005, IEEE Transactions on Components and Packaging Technologies.

[31]  Guo-Quan Lu,et al.  A lead-free, low-temperature sintering die-attach technique for high-performance and high-temperature packaging , 2004, Proceedings of the Sixth IEEE CPMT Conference on High Density Microsystem Design and Packaging and Component Failure Analysis (HDP '04).

[32]  G. Kang,et al.  UNIAXIAL AND NON-PROPORTIONALLY MULTIAXIAL RATCHETING OF SS304 STAINLESS STEEL AT ROOM TEMPERATURE: EXPERIMENTS AND SIMULATIONS , 2004 .

[33]  Guozheng Kang,et al.  A visco-plastic constitutive model for ratcheting of cyclically stable materials and its finite element implementation , 2004 .

[34]  G. Kang,et al.  Uniaxial ratcheting of SS304 stainless steel at high temperatures: visco-plastic constitutive model , 2003 .

[35]  Guozheng Kang,et al.  Uniaxial and non-proportionally multiaxial ratcheting of U71Mn rail steel: experiments and simulations , 2002 .

[36]  K. Streubel,et al.  High brightness AlGaInP light-emitting diodes , 2002 .

[37]  J. Wilde,et al.  Applying Anand Model to Represent the Viscoplastic Deformation Behavior of Solder Alloys , 2001 .

[38]  Jürgen Wilde,et al.  Viscoplastic Anand model for solder alloys and its application , 2000 .

[39]  M. Thoben,et al.  Rate dependent constitutive relations based on Anand model for 92.5Pb5Sn2.5Ag solder , 2000 .

[40]  N. Ohno,et al.  Uniaxial Ratchetting of 316FR Steel at Room Temperature— Part II: Constitutive Modeling and Simulation , 2000 .

[41]  N. Ohno,et al.  Uniaxial Ratchetting of 316FR Steel at Room Temperature— Part I: Experiments , 2000 .

[42]  N. Ohno,et al.  Kinematic hardening model suitable for ratchetting with steady-state , 2000 .

[43]  Nobutada Ohno,et al.  CONSTITUTIVE MODELING OF CYCLIC PLASTICITY WITH EMPHASIS ON RATCHETTING , 1998 .

[44]  S. Harvey,et al.  Fatigue and ratcheting interactions , 1995 .

[45]  Nobutada Ohno,et al.  Kinematic hardening rules with critical state of dynamic recovery, part II: Application to experiments of ratchetting behavior , 1993 .

[46]  L. Anand,et al.  An internal variable constitutive model for hot working of metals , 1989 .

[47]  L. Anand.  Constitutive equations for hot-working of metals , 1985 .

[48]  H. Godfrin,et al.  Properties of sintered silver powders and their application in heat exchangers at millikelvin temperatures , 1984 .