A Two-Stage Vibration Isolation System Featuring an Electrorheological Damper via the Semi-Active Static Output Feedback Variable Structure Control Method

In this paper, we present a semi-active static output feedback variable structure control (VSC) strategy for vibration isolation. The control concept is based on the fact that, for a practical vibration isolation system subject to external disturbances, all state variables are hard to measure on-line and variations of system parameters frequently exist. A bypass electrorheological (ER) damper is designed and manufactured by incorporating a Bingham model of ER fluids. After the voltage-dependent damping characteristics of the ER damper are evaluated, the dynamic model of a two-stage vibration isolation system with one ER damper is derived. Using only the measured information from sensors installed at strategic locations, continuous output feedback VSC controllers are presented, which do not have possible chattering effects. The continuous control law is decoupled from external disturbances by combining controller design under a meeting sliding mode reachable condition with the choice of sliding surface gradient parameters under a guarantee of the Routh-Hurwitz stability of reduced-order sliding mode dynamics. The saturation of the actuator is also incorporated into the controller, showing no adverse effect. The self-adaptability of the vibration isolation system with respect to external disturbances, the robustness of the control method with respect to parameter variations and the effectiveness of vibration isolation are demonstrated by numerical simulation results in the frequency and time domains. It is illustrated that the performance of the presented semi-active static output feedback VSC system is superior to those of optimally passive damping and maximum damping variety even if system parameter uncertainties exist.

[1]  Robert D. Hanson,et al.  Electrorheological Dampers, Part I: Analysis and Design , 1996 .

[2]  Faramarz Gordaninejad,et al.  Control of Forced Vibration Using Multi-Electrode Electro-Rheological Fluid Dampers , 1997 .

[3]  D. Grant Fisher,et al.  Continuous sliding mode control , 1992 .

[4]  Seung-Bok Choi,et al.  Control characteristics of a continuously variable ER damper , 1998 .

[5]  Aldo A. Ferri,et al.  Application of output feedback to variable structure systems , 1989 .

[6]  E. M. Elbeheiry.  EFFECTS OF SMALL TRAVEL SPEED VARIATIONS ON ACTIVE VIBRATION CONTROL IN MODERN VEHICLES , 2000 .

[7]  Subhash Rakheja,et al.  An Analytical and Experimental Investigation of the Driver-Seat-Suspension System , 1994 .

[8]  Kon Well Wang,et al.  Structural Vibration Control Via Electrorheological-Fluid-Based Actuators With Adaptive Viscous And Frictional Damping , 1994 .

[9]  Nicholas K. Petek.  An Electronically Controlled Shock Absorber Using Electrorheological Fluid , 1992 .

[10]  Dean Karnopp,et al.  Vibration Control Using Semi-Active Force Generators , 1974 .

[11]  Seung-Bok Choi,et al.  A Semi-Active Suspension Using ER Fluids for a Commercial Vehicle Seat , 1998 .

[12]  Kou-Cheng Hsu,et al.  Sliding Mode Controllers for Uncertain Systems with Input Nonlinearities , 1998 .

[13]  Thomas R. Weyenberg,et al.  Demonstration of an Automotive Semi-Active Suspension Using Electrorheological Fluid , 1995 .

[14]  V. Utkin.  Variable structure systems with sliding modes , 1977 .

[15]  Seung-Bok Choi,et al.  Field test results of a semi-active ER suspension system associated with skyhook controller , 2001 .

[16]  J. L. Sproston,et al.  Applications of electro-rheological fluids in vibration control: a survey , 1996 .

[17]  S. Wang,et al.  On pole assignment in linear multivariable systems using output feedback , 1975 .

[18]  Kon Well Wang,et al.  Feedback control of ER-fluid-based structures for vibration suppression , 1992 .