A novel selection method of scanning step for fabricating metal components based on micro-droplet deposition manufacture

[1]  Yi Liu,et al.  Simulation of influence of multi-defects on long-term working performance of high arch dam , 2011 .

[2]  Ryan B. Wicker,et al.  Open-cellular copper structures fabricated by additive manufacturing using electron beam melting , 2011 .

[3]  Jiming Zhou,et al.  Study on stable delivery of charged uniform droplets for freeform fabrication of metal parts , 2011 .

[4]  Jiming Zhou,et al.  Research on accurate droplet generation for micro-droplet deposition manufacture , 2010 .

[5]  Chul B. Park,et al.  Heat Transfer During Deposition of Molten Aluminum Alloy Droplets to Build Vertical Columns , 2009 .

[6]  Jun Luo,et al.  Research on lateral instability of the uniform-charged droplet stream during droplet-based freeform fabrication , 2008 .

[7]  Chul B. Park,et al.  Building three‐dimensional objects by deposition of molten metal droplets , 2008 .

[8]  S. Chandra,et al.  Numerical Simulation of Droplet Impact on Patterned Surfaces , 2007, International Thermal Spray Conference.

[9]  Li Peng,et al.  Direct laser fabrication of thin-walled metal parts under open-loop control , 2007 .

[10]  Chul B. Park,et al.  Experiments on Remelting and Solidification of Molten Metal Droplets Deposited in Vertical Columns , 2007 .

[11]  Wenbin Cao,et al.  Freeform fabrication of aluminum parts by direct deposition of molten aluminum , 2006 .

[12]  Dong-Yol Yang,et al.  Drop-on-demand deposition of superheated metal droplets for selective infiltration manufacturing , 2005 .

[13]  Stewart Xu Cheng,et al.  Producing molten metal droplets with a pneumatic droplet-on-demand generator , 2005 .

[14]  Pierre Fauchais,et al.  Experimental and Theoretical Study of the Impact of Alumina Droplets on Cold and Hot Substrates , 2003 .

[15]  Qingbin Liu,et al.  High precision solder droplet printing technology and the state-of-the-art , 2001 .

[16]  Melissa Orme,et al.  Enhanced Aluminum Properties by Means of Precise Droplet Deposition , 2000 .

[17]  Cristina H. Amon,et al.  Molten droplet solidification and substrate remelting in microcasting Part I: numerical modeling and experimental verification , 1999 .

[18]  J. Sopoušek,et al.  Sigma-phase equilibria and nucleation in Fe-Cr-Ni alloys at high temperature , 1996 .

[19]  J. Chun,et al.  Effects of droplet thermal state on deposit microstructure in spray forming , 1996 .

[20]  Christian H. Passow,et al.  Spray deposition of a Sn-40 Wt Pct Pb alloy with uniform droplets , 1993 .

[21]  J. Chen,et al.  Process analysis for laser solid forming of thin-wall structure , 2010 .

[22]  Wagner Enno,et al.  純FC‐84及びFC‐3284及びその二元混合物の核沸騰における高分解能測定 , 2009 .

[23]  Chul B. Park,et al.  Remelting and Coalescence of Molten Metal Droplets Deposited on a Plate , 2004 .

[24]  Dimos Poulikakos,et al.  Experimental investigation of the transient impact fluid dynamics and solidification of a molten microdroplet pile-up , 2003 .

[25]  M. Orme,et al.  PRECISION DROPLET-BASED MANUFACTURING AND MATERIAL SYNTHESIS: FLUID DYNAMICS AND THERMAL CONTROL ISSUES , 1996 .