New Actuation Mechanism for Actively Cooled SMA Springs in a Neurosurgical Robot

This paper presents the use of shape memory alloy (SMA) spring actuators with real-time cooling to control the motion of the minimally invasive neurosurgical intracranial robot (MINIR-II). A new actuation mechanism involving the passage of water as the cooling medium and air as the medium to drive out the water has been developed to facilitate real-time control of the springs. Control parameters, such as current, water flow rates, SMA predisplacement, and gauge pressure of the compressed air, are identified from the SMA thermal model and from the actuation mechanism. In-depth modeling and characterization have been performed regarding these parameters to optimize the robot motion speed. Forced water cooling has also been compared with forced air cooling and proved to be the superior method to achieve higher robot speed. An improved robot design and a magnetic-resonance-imaging-compatible experimental platform have been developed for the implementation of the actuation mechanism.

[1]  Coiled Tubing Hydraulics Modeling , 2000 .

[2]  Jaydev P. Desai,et al.  Design, development, and evaluation of an MRI-guided SMA spring-actuated neurosurgical robot , 2015, Int. J. Robotics Res..

[3]  H. Harry Asada,et al.  Wet shape memory alloy actuators for active vasculated robotic flesh , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[4]  Kaspar Althoefer,et al.  Three-Degree-of-Freedom MR-Compatible Multisegment Cardiac Catheter Steering Mechanism , 2016, IEEE Transactions on Biomedical Engineering.

[5]  Nabil Simaan,et al.  Kinematics-Based Detection and Localization of Contacts Along Multisegment Continuum Robots , 2012, IEEE Transactions on Robotics.

[6]  D. Caleb Rucker,et al.  A MRI-guided concentric tube continuum robot with piezoelectric actuation: A feasibility study , 2012, 2012 IEEE International Conference on Robotics and Automation.

[7]  Jaydev P. Desai,et al.  Towards high frequency actuation of SMA spring for the neurosurgical robot - MINIR-II , 2015, 2015 IEEE International Conference on Robotics and Automation (ICRA).

[8]  Stephen A. Mascaro,et al.  Dynamic Thermomechanical Modeling of a Wet Shape Memory Alloy Actuator , 2010 .

[9]  Mohammad Elahinia,et al.  SMA Actuation Mechanisms , 2015 .

[10]  Jaydev P. Desai,et al.  Towards a Robotic Hand Rehabilitation Exoskeleton for Stroke Therapy , 2014 .

[11]  Kaspar Althoefer,et al.  3-DOF MR-Compatible Multi-Segment Cardiac Catheter Steering Mechanism , 2022 .

[12]  K. Tanaka.  A THERMOMECHANICAL SKETCH OF SHAPE MEMORY EFFECT: ONE-DIMENSIONAL TENSILE BEHAVIOR , 1986 .

[13]  Bo Yang,et al.  Design, development, and evaluation of a master–slave surgical system for breast biopsy under continuous MRI , 2014, Int. J. Robotics Res..

[14]  Mohammad Elahinia,et al.  Design and testing of a minimally invasive intervertebral cage for spinal fusion surgery , 2013 .

[15]  Jaydev P. Desai,et al.  Towards Real-Time SMA Control for a Neurosurgical Robot: MINIR-II , 2015, ISRR.

[16]  Yan Li,et al.  Phase transformation behaviors of prestrained TiNi shape memory alloy fibers under the constraint of a hard substrate , 2001 .

[17]  Robert J. Webster,et al.  Robotic intracerebral hemorrhage evacuation: An in-scanner approach with concentric tube robots , 2015, 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[18]  R. M. Fand,et al.  The influence of property variation on forced convection heat transfer to liquids , 1972 .

[19]  Jonathan Luntz,et al.  Experimental characterization of the convective heat transfer from Shape Memory Alloy (SMA) wire to various ambient environments , 2008 .

[20]  Hiroshi Yokoi,et al.  Natural Heat-Sinking Control Method for High-Speed Actuation of the SMA , 2006 .

[21]  L. Brinson.  One-Dimensional Constitutive Behavior of Shape Memory Alloys: Thermomechanical Derivation with Non-Constant Material Functions and Redefined Martensite Internal Variable , 1993 .

[22]  D. Louw,et al.  Surgical Robotics: A Review and Neurosurgical Prototype Development , 2004, Neurosurgery.

[23]  Byungkyu Kim,et al.  Design and fabrication of a locomotive mechanism for capsule-type endoscopes using shape memory alloys (SMAs) , 2005, IEEE/ASME Transactions on Mechatronics.

[24]  Jaydev P. Desai,et al.  Design and kinematic analysis of a neurosurgical spring-based continuum robot using SMA spring actuators , 2015, 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[25]  N. Ryan,et al.  Transistion from laminar to turbulent flow in pipes , 1959 .

[26]  Giancarlo Ferrigno,et al.  Optically tracked multi-robot system for keyhole neurosurgery , 2011, 2011 IEEE International Conference on Robotics and Automation.

[27]  Giancarlo Ferrigno,et al.  Force feedback in a piezoelectric linear actuator for neurosurgery , 2011, The international journal of medical robotics + computer assisted surgery : MRCAS.

[28]  Yu Chen,et al.  Towards a discretely actuated steerable cannula for diagnostic and therapeutic procedures , 2012, Int. J. Robotics Res..

[29]  Stuart W. Churchill,et al.  Correlating equations for laminar and turbulent free convection from a horizontal cylinder , 1975 .

[30]  Jacques J. Bergman,et al.  Endoscopic Submucosal Dissection: Principles and Practice , 2016 .

[31]  G. Hu,et al.  Study on liquid-jet cooling and heating of the moving SMA actuator , 2008 .

[32]  Jaydev P. Desai,et al.  Towards a SMA-actuated Neurosurgical Intracerebral Hemorrhage Evacuation (NICHE) robot , 2015, 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[33]  R. Andrew Russell,et al.  Improving the response of SMA actuators , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.

[34]  Byung-Ju Yi,et al.  Design of a spring backbone micro endoscope , 2007, 2007 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[35]  Stefan Seelecke,et al.  Experimental characterization of self-sensing SMA actuators under controlled convective cooling , 2013 .