Optimizations of a photoresist coating process for photolithography in wafer manufacture via a radial basis neural network: A case study

This investigation applied a hybrid method, which combined a trained radial basis network (RBN) [S. Chen, C.F.N. Cowan, P.M. Grant. Orthogonal least squares learning algorithm for radial basis function networks. Neural Networks 2(2) (1991), 302-309] and a sequential quadratic programming (SQP) method [R. Fletcher, Practical Methods of Optimizations, vol. 1, Unconstrained Optimization, and vol. 2, Constrained Optimization, John Wiley and Sons Inc., New York, 1981], to determine an optimal parameter setting for photoresist (PR) coating processes of photolithography in wafer manufacture. Nine experimental runs based on an orthogonal array table were utilized to train the RBN and the SQP method was applied to search for an optimal setting. An orthogonal array table provided an economical and systematic arrangement of experiments to map the relationship between controlled parameters and desired outputs. In this study, a mean thickness and non-uniformity of the thickness of the PR were selected as monitored quality targets for the PR coating process. In addition, the PR temperature, the chamber humidity, the spinning rate, and the dispensation rate were four controlled parameters. The PR temperature and the chamber humidity were found to be the most significant factors in the mean thickness and non-uniformity of the thickness for the PR coating process from the analysis of variance (ANOVA).

[1]  Prasun Das.  CONCURRENT OPTIMIZATION OF MULTIRESPONSE PRODUCT PERFORMANCE , 1999 .

[2]  Chao-Ton Su,et al.  Optimizing the IC wire bonding process using a neural networks/genetic algorithms approach , 2003, J. Intell. Manuf..

[3]  Hung-Chang Liao,et al.  A data envelopment analysis method for optimizing multi-response problem with censored data in the Taguchi method , 2004, Comput. Ind. Eng..

[4]  R. Fletcher.  Practical Methods of Optimization , 1988 .

[5]  Snehasis Mukhopadhyay,et al.  Selecting an artificial neural network for efficient modeling and accurate simulation of the milling process , 2002 .

[6]  Investigation into the flange problem of resist along the edge of substrate caused by spin coating , 2002 .

[7]  Chao-Ton Su,et al.  The optimization of multi‐response problems in the Taguchi method , 1997 .

[8]  Pei-Jen Wang,et al.  Predictions on surface finish in electrical discharge machining based upon neural network models , 2001 .

[9]  Jie-Ren Shie,et al.  Optimization of Dry Machining Parameters for High-Purity Graphite in End-Milling Process by Artificial Neural Networks: A Case Study , 2006 .

[10]  R. H. Myers,et al.  Response Surface Methodology: Process and Product Optimization Using Designed Experiments , 1995 .

[11]  Hong Xiao,et al.  Introduction to Semiconductor Manufacturing Technology , 2000 .

[12]  Peter van Zant.  Microchip fabrication : a practical guide to semiconductor processing , 2004 .

[13]  Byungwhan Kim,et al.  Modeling plasma etching process using a radial basis function network , 2005 .

[14]  Xin Chen,et al.  Assignment of orthologous genes via genome rearrangement , 2005, IEEE/ACM Transactions on Computational Biology and Bioinformatics.

[15]  Genichii Taguchi,et al.  Introduction to quality engineering. designing quality into products a , 1986 .

[16]  Shang-Liang Chen,et al.  Orthogonal least squares learning algorithm for radial basis function networks , 1991, IEEE Trans. Neural Networks.

[17]  R. Roy.  A Primer on the Taguchi Method , 1990 .

[18]  Wolfgang Arden,et al.  Photolithography overview for 64 megabit production , 1994 .