Photomasks Fabrication Based on Optical Reduction for Microfluidic Applications

A procedure for fabrication of photomasks on photographic films with minimum feature achievable of about 20 μm, which are particularly suitable for the fast prototyping of microfluidic devices, has been improved. We used a commercial photographic enlarger in reverse mode obtaining 10:1 reduction factor with error less than 1%. Masks have been characterized by optical transmission measurement and contact profilometry: the exposed region completely absorbs light in the wavelength region explored, while the non-exposed region is transparent from 350 nm on; the average film thickness is of 410 nm and its roughness is about 120 nm. A PDMS microfluidic device has been realized and tested in order to prove the effectiveness of designed photomasks used with the common UV light box.

[1]  G. Whitesides,et al.  Soft Lithography. , 1998, Angewandte Chemie.

[2]  Hongkai Wu,et al.  Rapid prototyping of 2D structures with feature sizes larger than 8 microm. , 2003, Analytical chemistry.

[3]  Kevin P. Homewood,et al.  Fast prototypign of microfluidic devices for separation science , 2001 .

[4]  R. MELDOLA,et al.  The Optics of Photography , 1894, Nature.

[5]  Gyu-Tae Kim,et al.  Maskless optical microscope lithography system. , 2009, The Review of scientific instruments.

[6]  G. Whitesides,et al.  Rapid prototyping of microfluidic switches in poly(dimethyl siloxane) and their actuation by electro-osmotic flow , 1999 .

[7]  Meng-Hua Yen,et al.  Crack-free direct-writing on glass using a low-power UV laser in the manufacture of a microfluidic chip , 2005 .

[8]  Brittain,et al.  Prototyping of masks, masters, and stamps/molds for soft lithography using an office printer and photographic reduction , 2000, Analytical chemistry.

[9]  Yang Liu,et al.  Printed wax masks for 254 nm deep-UV pattering of PMMA-based microfluidics , 2012 .

[10]  Hans I. Bjelkhagen,et al.  Silver-Halide Recording Materials: for Holography and Their Processing , 1993 .

[11]  D. Beebe,et al.  Three-dimensional micro-channel fabrication in polydimethylsiloxane (PDMS) elastomer , 2000, Journal of Microelectromechanical Systems.

[12]  George M. Whitesides,et al.  Rapid prototyping of complex structures with feature sizes larger than 20 μm , 1996 .

[13]  John H. Bruning.  Optical lithography: 40 years and holding , 2007, SPIE Advanced Lithography.

[14]  C. Greiner,et al.  SU-8: a photoresist for high-aspect-ratio and 3D submicron lithography , 2007 .

[15]  G. Whitesides,et al.  Poly(dimethylsiloxane) as a material for fabricating microfluidic devices. , 2002, Accounts of chemical research.

[16]  Wook Park,et al.  Optofluidic maskless lithography system for real-time synthesis of photopolymerized microstructures in microfluidic channels , 2007 .

[17]  Dario Pisignano,et al.  Two-photon patterning of a polymer containing Y-shaped azochromophores , 2009 .

[18]  Whitesides,et al.  Fabrication of metallic microstructures using exposed, developed silver halide-based photographic film , 2000, Analytical chemistry.