Dispatch of capacitors on distribution system using dynamic programming

The dispatch of capacitors on a distribution feeder in daily system operation is investigated. The objective is to reach an optimal capacitor dispatching schedule, based on the forecast hourly loads for the next day, such that the total feeder loss in a day is minimised. The constraints that must be taken into account include the maximum allowable number of switching operations in a day for each capacitor, and the voltage limits on the feeder. An approach based on dynamic programming is presented to reach such an optimal schedule. To demonstrate the effectiveness of the proposed approach, the dispatch of capacitors on a distribution feeder within the service area of Taipei West District Office of Taiwan Power Company is investigated. It is concluded that a greater loss reduction can be achieved by the optimal capacitor dispatch than by the fixed-schedule dispatch.

[1]  M. Kaplan Optimization of Number, Location, Size, Control Type, and Control Setting of Shunt Capacitors on Radial Distribution Feeders , 1984, IEEE Transactions on Power Apparatus and Systems.

[2]  Tharwat Fawzi,et al.  New Approach for the Application of Shunt Capacitors to the Primary Distribution Feeders , 1983, IEEE Transactions on Power Apparatus and Systems.

[3]  G. Gross,et al.  Short-term load forecasting , 1987, Proceedings of the IEEE.

[4]  Yuan-Yih Hsu,et al.  Short term load forecasting of Taiwan power system using a knowledge-based expert system , 1990 .

[5]  J. Grainger,et al.  Optimal Capacitor Placement on Three-Phase Primary Feeders: Load and Feeder Unbalance Effects , 1983, IEEE Transactions on Power Apparatus and Systems.

[6]  Hernando Dura,et al.  Optimum Number, Location, and Size of Shunt Capacitors in Radial Distribution Feeders A Dynamic Programming Approach , 1968 .

[7]  M. T. Bishop,et al.  Distribution System Line Loss Reduction through Enhanced Capacitor Location Techniques , 1986, IEEE Transactions on Power Delivery.

[8]  Yahia Baghzouz,et al.  Effects of nonlinear loads on optimal capacitor placement in radial feeders , 1991 .

[9]  J. Grainger,et al.  Optimum Placement of Fixed and Switched Capacitors on Primary Distribution Feeders , 1981, IEEE Transactions on Power Apparatus and Systems.

[10]  M. Ponnavsikko,et al.  Optimal Choice of Fixed and Switched Shunt Capacitors on Radial Distributors by the Method of Local Variations , 1983, IEEE Transactions on Power Apparatus and Systems.

[11]  Turan Gonen,et al.  Electric power distribution system engineering , 1985 .

[12]  S. Civanlar,et al.  Optimal Design and Control Scheme for Continuous Capacitive Compensation of Distribution Feeders , 1983, IEEE Transactions on Power Apparatus and Systems.

[13]  J. Grainger,et al.  Optimum Size and Location of Shunt Capacitors for Reduction of Losses on Distribution Feeders , 1981, IEEE Transactions on Power Apparatus and Systems.

[14]  S. Civanlar,et al.  Volt/Var Control on Distribution Systems with Lateral Branches Using Shunt Capacitors and Voltage Regulators Part III: The Numerical Results , 1985, IEEE Transactions on Power Apparatus and Systems.

[15]  J. S. Lawler,et al.  Distribution automation applications software for the Athens Utilities Board , 1989 .

[16]  O. T. Tan,et al.  Neural-net based real-time control of capacitors installed on distribution systems , 1990 .

[17]  W. R. Nelson,et al.  Measuring and analyzing the impact of voltage and capacitor control with high speed data acquisition (distribution system) , 1989 .