Disassembly modeling, planning, and application

Abstract The practice of industrial recycling and remanufacturing is growing in importance due to increasing environmental and economic pressures. Industrial recycling and remanufacturing involves product disassembly to retrieve the desired parts and/or subassemblies by separating a product into its constituents. Disassembly modeling and planning is more challenging than assembly because its terminal goal is not necessarily fixed, but may depend on product usage and market demands for used parts and recycled materials. Moreover, disassembly is accompanied by more uncertainty in system structures and component conditions than is assembly. This paper presents recent methods for modeling and process planning in disassembly and the applications to industrial products. The main purpose of this paper is to survey the state of the art of this emerging area to supply important information for future study.

[1]  MengChu Zhou,et al.  An integrated approach to disassembly planning and demanufacturing operation , 2001, IEEE Trans. Robotics Autom..

[2]  T. C. Woo,et al.  Algorithm for multiple disassembly and parallel assemblies , 1995 .

[3]  Dan Geiger,et al.  Probabilistic Reactive Disassembly Planning , 1996 .

[4]  Askiner Gungor,et al.  Issues in environmentally conscious manufacturing and product recovery: a survey , 1999 .

[5]  Surendra M. Gupta,et al.  Disassembly sequence planning for complete disassembly in product recovery , 1998 .

[6]  J. R. Kirby,et al.  Designing business machines for disassembly and recycling , 1993, Proceedings of the 1993 IEEE International Symposium on Electronics and the Environment.

[7]  T. C. Kuo,et al.  A graph-based disassembly sequence planning for EOL product recycling , 1997, Twenty First IEEE/CPMT International Electronics Manufacturing Technology Symposium Proceedings 1997 IEMT Symposium.

[8]  Joseph R. Fiksel,et al.  Design for environment : creating eco-efficient products and processes , 1996 .

[9]  Ralph R. Martin,et al.  Disassembly sequences for objects built from unit cubes , 1993, Comput. Aided Des..

[10]  Tatsuya Suzuki,et al.  Feasibility of disassembly tasks considering a posture of a subassembly using genetic algorithm , 1997, Proceedings of IEEE/ASME International Conference on Advanced Intelligent Mechatronics.

[11]  MengChu Zhou,et al.  A methodology for modeling and adaptive planning of disassembly processes , 1999, IEEE Trans. Robotics Autom..

[12]  R. Gadh,et al.  Selective disassembly: representation and comparative analysis of wave propagation abstractions in sequence planning , 1999, Proceedings of the 1999 IEEE International Symposium on Assembly and Task Planning (ISATP'99) (Cat. No.99TH8470).

[13]  Rajit Gadh,et al.  Computer aided design for disassembly: a destructive approach , 1996, Proceedings of the 1996 IEEE International Symposium on Electronics and the Environment. ISEE-1996.

[14]  Erwin van der Laan,et al.  Quantitative models for reverse logistics: A review , 1997 .

[15]  Shigeru Okuma,et al.  On algebraic and graph structural properties of assembly Petri net , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.

[16]  Surendra M. Gupta,et al.  A petri net approach to disassembly process planning , 1998 .

[17]  Rajit Gadh,et al.  Complexity reduction in geometric selective disassembly using the wave propagation abstraction , 1998, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146).

[18]  Alfred J.D. Lambert.  Optimal disassembly of complex products , 1994 .

[19]  D. Dutta,et al.  Automatic Disassembly and Total Ordering in Three Dimensions , 1991 .

[20]  Spyros G. Tzafestas,et al.  Architecture and implementation of an autonomous car-disassembly system , 1997 .

[21]  MengChu Zhou,et al.  Disassembly modeling, planning and application: a review , 2000, Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065).

[22]  Hong-Chao Zhang,et al.  A graph-based approach to disassembly model for end-of-life product recycling , 1996, Nineteenth IEEE/CPMT International Electronics Manufacturing Technology Symposium.

[23]  Surendra M. Gupta,et al.  Disassembly sequence planning for products with defective parts in product recovery , 1998 .

[24]  Arthur C. Sanderson,et al.  Task sequence planning using fuzzy Petri nets , 1995, IEEE Trans. Syst. Man Cybern..

[25]  Thomas L. DeFazio,et al.  Simplified generation of all mechanical assembly sequences , 1987, IEEE Journal on Robotics and Automation.

[26]  W. Beitz,et al.  Designing for Ease of Recycling , 1993 .

[27]  Keith D. Baker,et al.  A hierarchical Petri net framework for the representation and analysis of assembly , 1996, IEEE Trans. Robotics Autom..

[28]  Arthur C. Sanderson,et al.  A correct and complete algorithm for the generation of mechanical assembly sequences , 1991, IEEE Trans. Robotics Autom..

[29]  Alfred J.D. Lambert,et al.  Optimal disassembly sequence generation for combined material recycling and part reuse , 1999, Proceedings of the 1999 IEEE International Symposium on Assembly and Task Planning (ISATP'99) (Cat. No.99TH8470).

[30]  Shiang-Fong Chen,et al.  Parallel Disassembly by Onion Peeling , 1997 .

[31]  MengChu Zhou,et al.  Disassembly Petri net approach to modeling and planning disassembly processes of electronic products , 1998, Proceedings of the 1998 IEEE International Symposium on Electronics and the Environment. ISEE - 1998 (Cat. No.98CH36145).

[32]  E. Zussman,et al.  Modeling and planning of disassembly processes , 1996 .

[33]  P. Dewhurst,et al.  Automatic Generation of Product Disassembly Sequences , 1991 .

[34]  Arthur C. Sanderson,et al.  AND/OR net representation for robotic task sequence planning , 1998, IEEE Trans. Syst. Man Cybern. Part C.

[35]  Reha Uzsoy,et al.  Optimal disassembly configurations for single and multiple products , 1999 .

[36]  L. H. Shu,et al.  Application of a design-for-remanufacture framework to the selection of product life-cycle fastening and joining methods , 1999 .

[37]  Surendra M. Gupta,et al.  Disassembly Petri net generation in the presence of XOR precedence relationships , 1998, SMC'98 Conference Proceedings. 1998 IEEE International Conference on Systems, Man, and Cybernetics (Cat. No.98CH36218).

[38]  Arthur C. Sanderson,et al.  AND/OR graph representation of assembly plans , 1986, IEEE Trans. Robotics Autom..

[39]  E. Chynoweth,et al.  Germany is in the fast lane as recycling gains speed , 1993 .

[40]  Thomas Martini Jørgensen,et al.  Shape recognition system for automatic disassembly of TV-sets , 1996, Proceedings of 3rd IEEE International Conference on Image Processing.

[41]  Kok-Meng Lee,et al.  Supervisory control of an automated disassembly workcell based on blocking topology , 1997, Proceedings of International Conference on Robotics and Automation.

[42]  MengChu Zhou,et al.  Design and implementation of an adaptive process planner for disassembly processes , 2000, IEEE Trans. Robotics Autom..

[43]  Rajit Gadh,et al.  A geometric algorithm for single selective disassembly using the wave propagation abstraction , 1998, Comput. Aided Des..