Moisture induced stresses in cross laminated timber (CLT) made from hydrothermally modified wood

[1]  B. Mohebby,et al.  Technological properties of glulam beams made from hydrothermally treated poplar wood , 2018 .

[2]  B. Mohebby,et al.  Glulam beam made from hydrothermally treated poplar wood with reduced moisture induced stresses. , 2017 .

[3]  S. Hiziroglu,et al.  An evaluation of properties of four heat treated wood species , 2014 .

[4]  C. Coșereanu,et al.  Effect of thermal treatment on some properties of lime wood , 2014, European Journal of Wood and Wood Products.

[5]  P. Borysiuk.  DIMENSIONAL STABILITY OF LAYERED ELEMENTS MADE OF THERMALLY MODIFIED WOOD , 2014 .

[6]  H. Militz,et al.  Changes in the microstructure of birch wood after hydrothermal treatment , 2013, Wood Science and Technology.

[7]  S. Hiziroglu,et al.  Effect of Heat Treatment on Surface Characteristics of Wild Cherry Wood , 2013 .

[8]  K. Malo,et al.  Moisture-induced stresses in glulam cross sections during wetting exposures , 2013, Wood Science and Technology.

[9]  B. Mohebby,et al.  The effect of hydrothermal treatment on bond shear strength of beech wood , 2012, European Journal of Wood and Wood Products.

[10]  K. Malo,et al.  The effect of climate variations on glulam—an experimental study , 2012, European Journal of Wood and Wood Products.

[11]  Jianxiong Lu,et al.  Increased dimensional stability of Chinese fir through steam-heat treatment , 2012, European Journal of Wood and Wood Products.

[12]  Stefania Fortino,et al.  Moisture-induced stresses perpendicular to grain in cross-sections of timber members exposed to different climates , 2011 .

[13]  A. Aksoy,et al.  COLOUR AND GLOSS CHANGES OF SOCTS PINE AFTER HEAT MODIFICATION , 2011 .

[14]  H. S. Kol.  Characteristics of heat-treated Turkish pine and fir wood after ThermoWood processing. , 2010, Journal of environmental biology.

[15]  K. Malo,et al.  Moisture induced stresses perpendicular to the grain in glulam: Review and evaluation of the relative importance of models and parameters , 2010 .

[16]  D. Aydemir,et al.  The effects of thermal treatment on the mechanical properties of wild Pear (Pyrus elaeagnifolia Pall.) wood and changes in physical properties , 2009 .

[17]  Thomas Gereke,et al.  Moisture-induced stresses and distortions in spruce cross-laminates and composite laminates , 2009 .

[18]  Thomas Gereke,et al.  Moisture-induced stresses in cross-laminated wood panels , 2009 .

[19]  Helena Pereira,et al.  Wood modification by heat treatment: a review. , 2009 .

[20]  Thomas Gereke,et al.  Identification of moisture-induced stresses in cross-laminated wood panels from beech wood (Fagus sylvatica L.) , 2009, Wood Science and Technology.

[21]  D. Korkut,et al.  The effects of heat treatment on physical properties and surface roughness of red-bud maple (Acer trautvetteri Medw.) wood. , 2008, Bioresource technology.

[22]  B. Mohebby,et al.  Influence of hydrothermal modification of fibers on some physical and mechanical properties of medium density fiberboard (MDF) , 2008, Holz als Roh- und Werkstoff.

[23]  Helena Pereira,et al.  PINE WOOD MODIFICATION BY HEAT TREATMENT IN AIR , 2008 .

[24]  J. Jermer,et al.  Bending strength of heat-treated spruce and pine timber , 2007 .

[25]  Sibel Yildiz,et al.  The effects of thermal modification on crystalline structure of cellulose in soft and hardwood , 2007 .

[26]  Mohamed Bouazara,et al.  Effect of high temperature treatment on the mechanical properties of birch (Betula papyrifera) , 2006, Wood Science and Technology.

[27]  J. Jönsson.  Internal stresses in glulam due to moisture gradients in the grain direction , 2005 .

[28]  H. Militz,et al.  Chemical changes in hydrothermal treated wood: FTIR analysis of combined hydrothermal and dry heat-treated wood , 2005, Holz als Roh- und Werkstoff.

[29]  Johan Jönsson,et al.  Internal stresses in the cross-grain direction in glulam induced by climate variations , 2004 .

[30]  P. Bekhta,et al.  Effect of High Temperature on the Change in Color, Dimensional Stability and Mechanical Properties of Spruce Wood , 2003 .

[31]  S. Thelandersson,et al.  The effect of moisture gradients on tensile strength perpendicular to grain in glulam , 2003, Holz als Roh- und Werkstoff.

[32]  J. Weiland,et al.  Study of chemical modifications and fungi degradation of thermally modified wood using DRIFT spectroscopy , 2003, Holz als Roh- und Werkstoff.

[33]  R. Alén,et al.  FTIR Monitoring of Chemical Changes in Softwood During Heating , 2000 .