Low Power and High Speed Switching of Ti-doped NiO ReRAM under the Unipolar Voltage Source of less than 3 V

This paper reports on low-power and high-speed resistive switching of a Ti-doped NiO memory, which is based on the switching mechanism of the redox reactions in a filamentary conductive path. A small reset current of less than 100 muA was achieved by controlling the gate voltage of a cell transistor, which acts as an excellent current limiter in the set operation. A fast reset time of less than 5 ns was achieved by doping the Ti into the NiO film. Ti is thought to be effective to not only stabilize the reset process by forming an oxygen reservoir, but also to suppress the abnormal set phenomenon during the reset operation due to the formation of strong Ti-O bonds. Moreover, stable pulse switching with a large resistance change ratio has been successfully demonstrated using a unipolar voltage source of less than 3 V.

[1]  M. Aoki,et al.  Reduction of Reset Current in NiO-ReRAM Brought about by Ideal Current Limiter , 2007, 2007 22nd IEEE Non-Volatile Semiconductor Memory Workshop.

[2]  Y. Inoue,et al.  High Speed Unipolar Switching Resistance RAM (RRAM) Technology , 2006, 2006 International Electron Devices Meeting.

[3]  S. Haddad,et al.  Non-volatile resistive switching for advanced memory applications , 2005, IEEE InternationalElectron Devices Meeting, 2005. IEDM Technical Digest..

[4]  I. Baek,et al.  Multi-layer cross-point binary oxide resistive memory (OxRRAM) for post-NAND storage application , 2005, IEEE InternationalElectron Devices Meeting, 2005. IEDM Technical Digest..

[5]  S. O. Park,et al.  Highly scalable nonvolatile resistive memory using simple binary oxide driven by asymmetric unipolar voltage pulses , 2004, IEDM Technical Digest. IEEE International Electron Devices Meeting, 2004..