Hollow core waveguide as mid-infrared laser modal beam filter

A novel method for mid-IR laser beam mode cleaning employing hollow core waveguide as a modal filter element is reported. The influence of the input laser beam quality on fiber optical losses and output beam profile using a hollow core waveguide with 200 μm-bore size was investigated. Our results demonstrate that even when using a laser with a poor spatial profile, there will exist a minimum fiber length that allows transmission of only the Gaussian-like fundamental waveguide mode from the fiber, filtering out all the higher order modes. This essentially single mode output is preserved also when the waveguide is bent to a radius of curvature of 7.5 cm, which demonstrates that laser mode filtering can be realized even if a curved light path is required.

[1]  Pietro Ferraro,et al.  Infrared digital reflective-holographic 3D shape measurements , 2008 .

[2]  Caterina Gaudiuso,et al.  Welding of PMMA by a femtosecond fiber laser. , 2015, Optics express.

[3]  E. Marcatili,et al.  Hollow metallic and dielectric waveguides for long distance optical transmission and lasers , 1964 .

[4]  Hans-Peter Loock,et al.  Cavity-enhanced spectroscopy and sensing , 2014 .

[5]  Frank K. Tittel,et al.  Quartz-Enhanced Photoacoustic Spectroscopy: A Review , 2014, Sensors.

[6]  Simone Borri,et al.  A quartz enhanced photo-acoustic gas sensor based on a custom tuning fork and a terahertz quantum cascade laser. , 2014, The Analyst.

[7]  C. Froehly,et al.  Flattening of spatial laser beam profile with low losses and minimal beam divergence. , 1992, Optics letters.

[8]  Vincenzo Spagnolo,et al.  Single mode operation with mid-IR hollow fibers in the range 5.1-10.5 µm. , 2015, Optics express.

[9]  J. Harrington,et al.  Loss and modal properties of Ag/AgI hollow glass waveguides. , 2012, Applied optics.

[10]  G Scamarcio,et al.  Widely-tunable mid-infrared fiber-coupled quartz-enhanced photoacoustic sensor for environmental monitoring. , 2014, Optics express.

[11]  Roshan George,et al.  Infrared transmissive, hollow plastic waveguides with inner Ag-Agl coatings. , 2005, Applied optics.

[12]  J. Limpert,et al.  Femtosecond and picosecond laser drilling of metals at high repetition rates and average powers. , 2009, Optics letters.

[13]  James A. Harrington,et al.  Low-Loss Hollow Waveguide Fibers for Mid-Infrared Quantum Cascade Laser Sensing Applications , 2013, Sensors.

[14]  G. Scamarcio,et al.  Mid-infrared fiber-coupled QCL-QEPAS sensor , 2013 .

[15]  Vincenzo Spagnolo,et al.  Coupling external cavity mid-IR quantum cascade lasers with low loss hollow metallic/dielectric waveguides , 2012 .

[16]  M Miyagi,et al.  Bending losses in hollow and dielectric tube leaky waveguides. , 1981, Applied optics.

[17]  Vincenzo Spagnolo,et al.  Spatial mode filtering of mid-infrared (mid-IR) laser beams with hollow core fiber optics , 2013, Photonics West - Optoelectronic Materials and Devices.

[18]  James A. Harrington,et al.  Launch conditions and mode coupling in hollow-glass waveguides , 1998 .

[19]  Naomi J Halas,et al.  Engineered nanomaterials for biophotonics applications: improving sensing, imaging, and therapeutics. , 2003, Annual review of biomedical engineering.

[20]  Kestutis Staliunas,et al.  Signatures of light-beam spatial filtering in a three-dimensional photonic crystal , 2010 .

[21]  James A. Harrington,et al.  A Review of IR Transmitting, Hollow Waveguides , 2000 .

[22]  P. Hariharan.  Optical Holography: Subject index , 1996 .

[23]  G. Scamarcio,et al.  Part-per-trillion level SF6 detection using a quartz enhanced photoacoustic spectroscopy-based sensor with single-mode fiber-coupled quantum cascade laser excitation. , 2012, Optics letters.