Efficient Piezoelectric Energy Harvesters Utilizing (001) Textured Bimorph PZT Films on Flexible Metal Foils

Extracting energy from low vibration frequencies (<10 Hz) using piezoelectric energy harvester promises continuous self-powering for sensors and wearables. The piezoelectric compliant mechanism (PCM) design provides a significantly higher efficiency by fostering a uniform strain for its 1st mode shape, and so is interesting for this application. In this paper, a PCM energy harvester with bimorph Pb(Zr,Ti)O3 (PZT) films on Ni foil deposited by rf magnetron sputtering is shown to have high efficiency and large power for low frequency mechanical vibration. In particular, {001} textured PZT films are deposited on both sides of polished Ni foils with (100) oriented LaNiO3 seed layers on HfO2 buffer layers. The performance of PCM with an active area of 5.2 cm2 is explored for various excitation accelerations (0.02–0.16 g [g = 9.8 m s−2]) around 6 Hz. The PCM device provides a power level of 3.9 mW cm−2 g2 and 65% mode shape efficiencies.

[1]  Hidetoshi Kotera,et al.  High-efficiency piezoelectric energy harvesters of c-axis-oriented epitaxial PZT films transferred onto stainless steel cantilevers , 2010 .

[2]  Alper Erturk,et al.  Nonlinear M-shaped broadband piezoelectric energy harvester for very low base accelerations: primary and secondary resonances , 2015 .

[3]  N. Hudak,et al.  Small-scale energy harvesting through thermoelectric, vibration, and radiofrequency power conversion , 2008 .

[4]  D. Berlincourt,et al.  Thermal Expansion and Pyroelectricity in Lead Titanate Zirconate and Barium Titanate , 1963 .

[5]  Cesare Stefanini,et al.  Piezoelectric Energy Harvesting Solutions , 2014, Sensors.

[6]  Shadrach Roundy,et al.  On the Effectiveness of Vibration-based Energy Harvesting , 2005 .

[7]  E. Thomsen,et al.  High-performance piezoelectric thick film based energy harvesting micro-generators for MEMS , 2010 .

[8]  Kensuke Kanda,et al.  Thin-film piezoelectric bimorph actuators with increased thickness using double Pb[Zr,Ti]O3 layers , 2015 .

[9]  Hideaki Adachi,et al.  Vibration energy harvesting using highly (001)-oriented Pb(Zr,Ti)O3 thin film , 2010 .

[10]  Ryutaro Maeda,et al.  Effect of multi-coating process on the orientation and microstructure of lead zirconate titanate (PZT) thin films derived by chemical solution deposition , 2005 .

[11]  G. Brennecka,et al.  Use of Stress To Produce Highly Oriented Tetragonal Lead Zirconate Titanate (PZT 40/60) Thin Films and Resulting Electrical Properties , 2004 .

[12]  Vincenzo Cotroneo,et al.  Improving yield of PZT piezoelectric devices on glass substrates , 2012, Other Conferences.

[13]  Chang Kyu Jeong,et al.  Highly‐Efficient, Flexible Piezoelectric PZT Thin Film Nanogenerator on Plastic Substrates , 2014, Advanced materials.

[14]  R. W. Schwartz,et al.  Comments on the effects of solution precursor characteristics and thermal processing conditions on the crystallization behavior of sol-gel derived lead zirconate titanate thin films , 1997 .

[15]  S. Priya,et al.  Piezoelectric MEMS for energy harvesting , 2012 .

[16]  Daniel J. Inman,et al.  An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitations , 2009 .

[17]  Wen-Jong Wu,et al.  Fabrication of PZT MEMS energy harvester based on silicon and stainless-steel substrates utilizing an aerosol deposition method , 2013 .

[18]  Henry A. Sodano,et al.  A review of power harvesting using piezoelectric materials (2003–2006) , 2007 .

[19]  Chengkuo Lee,et al.  A new energy harvester design for high power output at low frequencies , 2013 .

[20]  Yuki Miwa,et al.  Orientation control and electrical properties of PZT/LNO capacitor through chemical solution deposition , 2006 .

[21]  K. Wasa,et al.  Thin-Film Piezoelectric Materials For a Better Energy Harvesting MEMS , 2012, Journal of Microelectromechanical Systems.

[22]  T. G. Kollie,et al.  Measurement of the thermal-expansion coefficient of nickel from 300 to 1000 K and determination of the power-law constants near the Curie temperature , 1977 .

[23]  Junru Wu,et al.  Experimental and theoretical studies on MEMS piezoelectric vibrational energy harvesters with mass loading , 2012 .

[24]  S. Trolier-McKinstry,et al.  Epitaxial Pb(Zrx,Ti1−x)O3 (0.30 ≤ x ≤ 0.63) films on (100)MgO substrates for energy harvesting applications , 2012 .

[25]  Paul Muralt,et al.  Growth and properties of gradient free sol-gel lead zirconate titanate thin films , 2007 .

[26]  Timothy C. Green,et al.  Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices , 2008, Proceedings of the IEEE.

[27]  Sergei V. Kalinin,et al.  Designing piezoelectric films for micro electromechanical systems , 2011, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[28]  S. Trolier-McKinstry,et al.  {001} Oriented piezoelectric films prepared by chemical solution deposition on Ni foils , 2014 .

[29]  R. D. Nasby,et al.  Highly Oriented, Chemically Prepared Pb(Zr, Ti)O3 Thin Films , 1993 .

[30]  H. Wikle,et al.  The design, fabrication and evaluation of a MEMS PZT cantilever with an integrated Si proof mass for vibration energy harvesting , 2008 .

[32]  S. Priya.  Advances in energy harvesting using low profile piezoelectric transducers , 2007 .

[33]  Susan Trolier-McKinstry,et al.  Efficient Energy Harvesting Using Piezoelectric Compliant Mechanisms: Theory and Experiment , 2016 .

[34]  D. Markley,et al.  Energy Harvesting Using a Piezoelectric “Cymbal” Transducer in Dynamic Environment , 2004 .