Two-dimensional sublamination theory for analysis of functionally graded plates

Presented is a two-dimensional sublamination theory for analysis of plates made of functionally graded materials. The sublamination plate theory extends a layer-wise higher-order shear-deformation theory for laminated plates by considering material properties being continuous functions of the thickness coordinate and using a new concept of sublamination to increase the degrees of freedom. The theory accommodates free shear stress conditions on the bonding surfaces, accounts for non-uniform deformation-dependent distributions of transverse shear stresses through the thickness, can be used for evaluating boundary restraint effects, and can be used for analyzing thin and thick plates with any boundary conditions. A sublamination plate element based on this theory is developed and validated for static and dynamic analysis. The degrees of freedom of the element is adaptable. For an element away from boundaries, it's degrees of freedom can be reduced at the elemental level without loss of accuracy. Analytical shear warping functions are presented. Moreover, modal analysis of functionally graded plates with different boundary conditions is performed to show the capability and accuracy of the theory.

[1]  N. Pagano,et al.  Exact Solutions for Composite Laminates in Cylindrical Bending , 1969 .

[2]  M. B. Bever,et al.  Gradients in composite materials , 1972 .

[3]  Anthony N. Palazotto,et al.  A higher-order sandwich plate theory accounting for 3-D stresses , 2000 .

[4]  Yehia A. Bahei-El-Din,et al.  IUTAM Symposium on Transformation Problems in Composite and Active Materials , 1998 .

[5]  J. Aboudi.  Mechanics of composite materials - A unified micromechanical approach , 1991 .

[6]  J. N. Reddy,et al.  An accurate determination of stresses in thick laminates using a generalized plate theory , 1990 .

[7]  J. Whitney.  Structural Analysis of Laminated Anisotropic Plates , 1987 .

[8]  S. Srinivas,et al.  Flexure of Simply Supported Thick Homogeneous and Laminated Rectangular Plates , 1969 .

[9]  A. Nayfeh,et al.  Linear and Nonlinear Structural Mechanics , 2002 .

[10]  John D. Renton,et al.  Generalized beam theory applied to shear stiffness , 1991 .

[11]  R. Hill.  A self-consistent mechanics of composite materials , 1965 .

[12]  Perngjin F. Pai,et al.  A new look at shear correction factors and warping functions of anisotropic laminates , 1995 .

[13]  Philip Rabinowitz,et al.  Methods of Numerical Integration , 1985 .

[14]  Yoshinari Miyamoto,et al.  Functionally Graded Materials. , 1995 .

[15]  S. Vel,et al.  Three-dimensional exact solution for the vibration of functionally graded rectangular plates , 2004 .

[16]  M. Gasik.  Micromechanical modelling of functionally graded materials , 1998 .

[17]  K. S. Ramesh,et al.  Modelling studies applied to functionally graded materials , 1995 .

[18]  J. N. Reddy,et al.  A Variational Approach to Three-Dimensional Elasticity Solutions of Laminated Composite Plates , 1992 .

[19]  Ahmed K. Noor,et al.  Assessment of Shear Deformation Theories for Multilayered Composite Plates , 1989 .

[20]  Steven M. Arnold,et al.  Higher-order theory for functionally graded materials , 1999 .

[21]  S. Suresh,et al.  Fundamentals of functionally graded materials , 1998 .

[22]  K. Tanaka,et al.  Average stress in matrix and average elastic energy of materials with misfitting inclusions , 1973 .

[23]  N. Pagano,et al.  Exact Solutions for Rectangular Bidirectional Composites and Sandwich Plates , 1970 .