Tailoring of oxidized starch's adhesion using crosslinker and adhesion promotor for the recycling of fiberboards

[1]  Byung‐Dae Park,et al.  Modification of urea-formaldehyde resin adhesives with oxidized starch using blocked pMDI for plywood , 2018, Journal of Adhesion Science and Technology.

[2]  Byung‐Dae Park,et al.  Effects of surface laminate type and recycled fiber content on properties of three-layer medium density fiberboard , 2018, Wood Material Science & Engineering.

[3]  Byung‐Dae Park,et al.  Effects of recycled fiber content on the properties of medium density fiberboard , 2018, European Journal of Wood and Wood Products.

[4]  Byung‐Dae Park,et al.  Analysis of the hydrolysates from cured and uncured urea-formaldehyde (UF) resins with two F/U mole ratios , 2018 .

[5]  George I. Mantanis,et al.  Adhesive systems used in the European particleboard, MDF and OSB industries* , 2018 .

[6]  Yue Dong,et al.  Simple production of medium density fiberboards (MDF) reinforced with chitosan , 2018 .

[7]  Byung‐Dae Park,et al.  Hydrolytic Removal of Cured Urea–Formaldehyde Resins in Medium-Density Fiberboard for Recycling , 2018 .

[8]  I. Ullah,et al.  Effects of sucrose fatty acid esters on the stability and bonding performance of high amylose starch-based wood adhesive. , 2017, International journal of biological macromolecules.

[9]  Stergios Adamopoulos,et al.  Development of sustainable bio-adhesives for engineered wood panels – A review , 2017 .

[10]  Jeffrey F. Morris.  Recycle, Bury, or Burn Wood Waste Biomass?: LCA Answer Depends on Carbon Accounting, Emissions Controls, Displaced Fuels, and Impact Costs , 2017 .

[11]  T. Tamminen,et al.  Utilization of lignin powder for manufacturing self-binding HDF , 2017 .

[12]  J. A. Ramírez,et al.  Polysaccharide-based films and coatings for food packaging: A review , 2017 .

[13]  C. Frazier,et al.  Biogenic Formaldehyde: Content and Heat Generation in the Wood of Three Tree Species , 2017 .

[14]  Byung‐Dae Park,et al.  Modification of urea-formaldehyde resin adhesives with blocked isocyanates using sodium bisulfite , 2017 .

[15]  Jiulin Wang,et al.  Oxidized starch as a superior binder for silicon anodes in lithium-ion batteries , 2016 .

[16]  Xiangfang Peng,et al.  Preparation of Novel c-6 Position Carboxyl Corn Starch by a Green Method and Its Application in Flame Retardance of Epoxy Resin , 2015 .

[17]  Yiqi Yang,et al.  Robust and Flexible Films from 100% Starch Cross-Linked by Biobased Disaccharide Derivative , 2015 .

[18]  Yanhua Zhang,et al.  Preparation and properties of a starch-based wood adhesive with high bonding strength and water resistance. , 2015, Carbohydrate polymers.

[19]  H. Wan,et al.  Recycling Wood Composite Panels: Characterizing Recycled Materials , 2014 .

[20]  Arun Gupta,et al.  Synthesis and characterization of medium density fiber board by using mixture of natural rubber latex and starch as an adhesive , 2014, Journal of the Indian Academy of Wood Science.

[21]  W. Grigsby,et al.  Investigating the Extent of Urea Formaldehyde Resin Cure in Medium Density Fiberboard: Resin Extractability and Fiber Effects , 2014 .

[22]  W. Sridach,et al.  Effect of citric acid, PVOH, and starch ratio on the properties of cross-linked poly(vinyl alcohol)/starch adhesives , 2013 .

[23]  A. Abbott,et al.  Starch as a replacement for urea-formaldehyde in medium density fibreboard , 2012 .

[24]  S. Hiziroglu,et al.  Properties of Rubberwood Medium-Density Fiberboard Bonded with Starch and Urea-Formaldehyde , 2012 .

[25]  E. Roffael,et al.  Complex chemical interactions on thermo hydrolytic degradation of urea formaldehyde resins (UF-resins) in recycling UF-bonded boards , 2012, European Journal of Wood and Wood Products.

[26]  Zhengbiao Gu,et al.  Bonding strength and water resistance of starch-based wood adhesive improved by silica nanoparticles , 2011 .

[27]  Byung‐Dae Park,et al.  Morphology and chemical elements detection of cured urea–formaldehyde resins , 2011 .

[28]  P. Chang,et al.  Oxidized pea starch/chitosan composite films: Structural characterization and properties , 2010 .

[29]  Byung‐Dae Park,et al.  Hydrolytic stability of cured urea‐formaldehyde resins modified by additives , 2009 .

[30]  F. Mangani,et al.  Furniture wood wastes: experimental property characterisation and burning tests. , 2009, Waste management.

[31]  Byung‐Dae Park,et al.  Dynamic mechanical analysis of urea–formaldehyde resin adhesives with different formaldehyde‐to‐urea molar ratios , 2008 .

[32]  A. Mansur,et al.  FTIR spectroscopy characterization of poly (vinyl alcohol) hydrogel with different hydrolysis degree and chemically crosslinked with glutaraldehyde , 2008 .

[33]  S. Y. Zhang,et al.  Medium-density fiberboard performance as affected by wood fiber acidity, bulk density, and size distribution , 2006, Wood Science and Technology.

[34]  K. Straif,et al.  Advice on formaldehyde and glycol ethers. , 2004, The Lancet. Oncology.

[35]  S. Y. Zhang,et al.  Effect of wood acidity and catalyst on UF resin gel time , 2004 .

[36]  J. Karkalas,et al.  Starch-composition, fine structure and architecture , 2004 .

[37]  Patricia A Stewart,et al.  Mortality from lymphohematopoietic malignancies among workers in formaldehyde industries. , 2003, Journal of the National Cancer Institute.

[38]  D. Wicks,et al.  Blocked isocyanates III , 2001 .

[39]  P Colonna,et al.  Starch granules: structure and biosynthesis. , 1998, International journal of biological macromolecules.

[40]  Nabila A. El‐Shinnawy,et al.  Thermal behaviour of starch and oxidized starch , 1997 .

[41]  H. Onusseit.  Starch in industrial adhesives: new developments , 1992 .

[42]  I. S. Blagbrough,et al.  The condensation reaction between isocyanates and carboxylic acids. A practical synthesis of substituted amides and anilides. , 1986 .

[43]  H. Srivastava,et al.  Kinetics and mechanism of oxidation of starch with sodium hypochlorite , 1974 .