Current trends and research opportunities in hybrid additive manufacturing

Despite the rapid growth in the past decade, the industrial adoption of additive manufacturing has not still been achieved due to certain limitations. A recent trend to alleviate its inherent drawbacks is to integrate additive manufacturing with secondary production techniques. Indeed, hybrid additive manufacturing solutions may help overcome the current barriers to today’s production systems by making use of the combined merits of merging technologies. This paper presents a comprehensive review of the current state-of-the-art in the field, covering the following three key aspects of the subject: (i) advances in the hybridization of additive manufacturing processes, (ii) developments in process planning for integrated technologies, and (iii) insights into the hybrid additive manufacturing industry. The main objective of the paper is to classify the latest knowledge for the researchers, along with highlighting challenges and future research directions in this field.

[1]  Adam T. Clare,et al.  Machining of additively manufactured parts: implications for surface integrity , 2016 .

[2]  Giuseppe Ingarao,et al.  Towards criteria for sustainable process selection: On the modelling of pure subtractive versus additive/subtractive integrated manufacturing approaches , 2017 .

[3]  D. Hand,et al.  Material interactions in laser polishing powder bed additive manufactured Ti6Al4V components , 2018 .

[4]  Hans-Joachim Schmid,et al.  Optimized build orientation of additive manufactured parts for improved surface quality and build time , 2016 .

[5]  F. Jiang,et al.  Ultrasonic Peening Treatment Used to Improve Stress Corrosion Resistance of AlSi10Mg Components Fabricated Using Selective Laser Melting , 2019, Metals.

[6]  Frank W. Liou,et al.  Automatic Process Planning and Toolpath Generation of a Multiaxis Hybrid Manufacturing System , 2005 .

[7]  P. Senthil,et al.  Effect of chemical treatment on tensile strength and surface roughness of 3D-printed ABS using the FDM process , 2018 .

[8]  Khamis Essa,et al.  Net-shape manufacturing using hybrid selective laser melting/hot isostatic pressing , 2017 .

[9]  Christopher Saldana,et al.  An Adaptive Geometry Transformation and Repair Method for Hybrid Manufacturing , 2018, Journal of Manufacturing Science and Engineering.

[10]  J. Chen,et al.  Directly Manufacturing Table Tennis Mould by Hybrid Plasma Deposition & Milling , 2014 .

[11]  Vimal Dhokia,et al.  Invited review article: Strategies and processes for high quality wire arc additive manufacturing , 2018, Additive Manufacturing.

[12]  Aitzol Lamikiz,et al.  Laser polishing of parts built up by selective laser sintering , 2007 .

[13]  Pascal Mognol,et al.  High speed milling, electro discharge machining and direct metal laser sintering: A method to optimize these processes in hybrid rapid tooling , 2006 .

[14]  Adam T. Clare,et al.  On the machinability of directed energy deposited Ti6Al4V , 2018 .

[15]  Chaoyue Chen,et al.  Hybrid additive manufacture of 316L stainless steel with cold spray and selective laser melting: Microstructure and mechanical properties , 2019, Journal of Materials Processing Technology.

[16]  Matthew C. Frank,et al.  A new method for locating candidate substrates for multi axis hybrid manufacturing systems , 2018 .

[17]  Sangkee Min,et al.  From design for manufacturing (DFM) to manufacturing for design (MFD) via hybrid manufacturing and smart factory: A review and perspective of paradigm shift , 2016 .

[18]  Ruth Jill Urbanic,et al.  A process planning framework and virtual representation for bead-based additive manufacturing processes , 2017 .

[19]  Zhanqiang Liu,et al.  On machinability and surface integrity in subsequent machining of additively-manufactured thick coatings: A review , 2020 .

[20]  D. I. Wimpenny,et al.  Laser polishing of selective laser melted components , 2015 .

[21]  S M Giannitelli,et al.  Combined additive manufacturing approaches in tissue engineering. , 2015, Acta biomaterialia.

[22]  K. Osakada,et al.  Three-Dimensional Fabrication of Metallic Parts and Molds Using Hybrid Process of Powder Layer Compaction and Milling 474 , 2002 .

[23]  Guillaume Mandil,et al.  Environmental impact assessment of an innovative strategy based on an additive and subtractive manufacturing combination , 2017 .

[24]  Bi Zhang,et al.  A Novel Method for Additive/Subtractive Hybrid Manufacturing of Metallic Parts☆ , 2016 .

[25]  V. Romano,et al.  Laser shock peening: A promising tool for tailoring metallic microstructures in selective laser melting , 2019, Journal of Materials Processing Technology.

[26]  Paul A. Colegrove,et al.  Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling , 2013 .

[27]  Seok-Hee Lee,et al.  A study of post-processing methods for improving the tightness of a part fabricated by fused deposition modeling , 2016 .

[28]  Vimal Dhokia,et al.  Application of a hybrid process for high precision manufacture of difficult to machine prismatic parts , 2014 .

[29]  Omar Ahmed Mohamed,et al.  Optimization of fused deposition modeling process parameters for dimensional accuracy using I-optimality criterion , 2016 .

[30]  S. Luo,et al.  Regain the fatigue strength of laser additive manufactured Ti alloy via laser shock peening , 2018, Journal of Alloys and Compounds.

[31]  Rafiq Ahmad,et al.  A Topology Optimization Method for Hybrid Subtractive–Additive Remanufacturing , 2020, International Journal of Precision Engineering and Manufacturing-Green Technology.

[32]  Lei Liu,et al.  Laser shock peening of laser additive manufactured Ti6Al4V titanium alloy , 2018, Surface and Coatings Technology.

[33]  Wang Guilan,et al.  A new method of direct metal prototyping: hybrid plasma deposition and milling , 2008 .

[34]  Ching-chih Wei,et al.  Development of a hybrid rapid prototyping system using low-cost fused deposition modeling and five-axis machining , 2014 .

[35]  Xiaoyan Zeng,et al.  Effects of milling thickness on wire deposition accuracy of hybrid additive/subtractive manufacturing , 2019, Science and Technology of Welding and Joining.

[36]  William O’Neill,et al.  Cold gas dynamic manufacturing: A non-thermal approach to freeform fabrication , 2007 .

[37]  Alberto Boschetto,et al.  Finishing of Fused Deposition Modeling parts by CNC machining , 2016 .

[38]  Vimal Dhokia,et al.  Hybrid Ants: A New Approach for Geometry Creation for Additive and Hybrid Manufacturing , 2017 .

[39]  Charlie C. L. Wang,et al.  Support-free volume printing by multi-axis motion , 2018, ACM Trans. Graph..

[40]  A. Morandeau,et al.  Influence of Finish Machining on the Surface Integrity of Ti6Al4V Produced by Selective Laser Melting , 2016 .

[41]  Ken Chen,et al.  A review of slicing methods for directed energy deposition based additive manufacturing , 2018, Rapid Prototyping Journal.

[42]  Vimal Dhokia,et al.  The development of a novel process planning algorithm for an unconstrained hybrid manufacturing process , 2013 .

[43]  Ke Xu,et al.  A sequence planning method for five-axis hybrid manufacturing of complex structural parts , 2020 .

[44]  Melik Dolen,et al.  The Role of Additive Manufacturing in the Era of Industry 4.0 , 2017 .

[45]  A. Sova,et al.  Potential of cold gas dynamic spray as additive manufacturing technology , 2013 .

[46]  Jean-Yves Hascoët,et al.  Manufacturing complexity evaluation at the design stage for both machining and layered manufacturing , 2010 .

[47]  Y. Gong,et al.  Effect of post-heat treatment on residual stress and tensile strength of hybrid additive and subtractive manufacturing , 2019, The International Journal of Advanced Manufacturing Technology.

[48]  Jun Zhang,et al.  Adaptive slicing for a multi-axis Laser Aided Manufacturing Process , 2004 .

[49]  J. Shi,et al.  Investigation on Surface Quality in a Hybrid Manufacturing System Combining Wire and Arc Additive Manufacturing and Machining , 2018 .

[50]  Aitzol Lamikiz,et al.  Latest Developments in Industrial Hybrid Machine Tools that Combine Additive and Subtractive Operations , 2018, Materials.

[51]  Guha Manogharan,et al.  Current state and potential of additive – hybrid manufacturing for metal parts , 2017 .

[52]  Li Chong,et al.  A review of digital manufacturing-based hybrid additive manufacturing processes , 2017, The International Journal of Advanced Manufacturing Technology.

[53]  Li Chen,et al.  Manufacturability analysis and process planning for additive and subtractive hybrid manufacturing of Quasi-rotational parts with columnar features , 2020, Comput. Aided Des..

[54]  Xin Chen,et al.  An integrated adaptive repair solution for complex aerospace components through geometry reconstruction , 2008 .

[55]  Daniel F. Walczyk,et al.  Using abrasive flow machining to seal and finish conformal channels in laminated tooling , 2007 .

[56]  Kunwoo Lee,et al.  Concave edge-based part decomposition for hybrid rapid prototyping , 2005 .

[57]  J. Kruth,et al.  Manufacturing by combining Selective Laser Melting and Selective Laser Erosion/laser re-melting , 2011 .

[58]  Zhu Hu,et al.  Determination of optimal build orientation for hybrid rapid-prototyping , 2002 .

[59]  Matthew Roy,et al.  Residual stress of as-deposited and rolled wire+arc additive manufacturing Ti–6Al–4V components , 2016 .

[60]  Jun Zhang,et al.  A process planning strategy for multi-axis hybrid manufacturing process , 2013 .

[61]  Antonio Armillotta,et al.  Edge quality in fused deposition modeling: I. Definition and analysis , 2017 .

[62]  Alberto Boschetto,et al.  Surface improvement of Fused Deposition Modeling parts by Barrel Finishing , 2015 .

[63]  Wei Zhou,et al.  Laser polishing of additive manufactured Ti alloys , 2017 .

[64]  Anirban Bhattacharya,et al.  Chemical vapor treatment of ABS parts built by FDM: Analysis of surface finish and mechanical strength , 2017 .

[65]  Bo-Sung Shin,et al.  Development of a direct metal freeform fabrication technique using CO2 laser welding and milling technology , 2001 .

[66]  Kah Fai Leong,et al.  Abrasive jet deburring of jewellery models built by stereolithography apparatus (SLA) , 1998 .

[67]  Ryan B. Wicker,et al.  Increasing component functionality via multi-process additive manufacturing , 2017, Defense + Security.

[68]  Yiran Yang,et al.  Theoretical modelling and prediction of surface roughness for hybrid additive–subtractive manufacturing processes , 2018, IISE Trans..

[69]  Sung-Hoon Ahn,et al.  Development of translucent FDM parts by post‐processing , 2004 .

[70]  F. Liou,et al.  Investigation of Forged-Like Microstructure Produced by a Hybrid Manufacturing Process , 2016 .

[71]  Alexander M. Korsunsky,et al.  submitter : Eigenstrain reconstruction of residual strains in an additively manufactured and shot peened nickel superalloy compressor blade , 2017 .

[72]  Lei Liu,et al.  Microstructure, residual stress and tensile properties control of wire-arc additive manufactured 2319 aluminum alloy with laser shock peening , 2018 .

[73]  P. Jain,et al.  Laser assisted finishing process for improved surface finish of fused deposition modelled parts , 2017 .

[74]  Kai Tang,et al.  Optimized sequence planning for multi-axis hybrid machining of complex geometries , 2018, Comput. Graph..

[75]  Yi Wan,et al.  Modeling of the chemical finishing process for polylactic acid parts in fused deposition modeling and investigation of its tensile properties , 2017 .

[76]  Anthony J. Favaloro,et al.  Fused filament fabrication of fiber-reinforced polymers: A review , 2018 .

[77]  Aydin Nassehi,et al.  A review of hybrid manufacturing processes – state of the art and future perspectives , 2013, Int. J. Comput. Integr. Manuf..

[78]  David Espalin,et al.  Material handling and registration for an additive manufacturing-based hybrid system , 2017 .

[79]  Luigi Maria Galantucci,et al.  Compressive Properties of FDM Rapid Prototypes Treated with a Low Cost Chemical Finishing , 2012 .

[80]  Jean-Pierre Kruth,et al.  Investigation of Laser and Process Parameters for Selective Laser Erosion , 2010 .

[81]  Haiou Zhang,et al.  Improvement in Geometrical Accuracy and Mechanical Property for Arc-Based Additive Manufacturing Using Metamorphic Rolling Mechanism , 2016 .

[82]  Vimal Dhokia,et al.  Hybrid additive and subtractive machine tools – Research and industrial developments , 2016 .

[83]  Diego Carou,et al.  Surface Quality Enhancement of Fused Deposition Modeling (FDM) Printed Samples Based on the Selection of Critical Printing Parameters , 2018, Materials.

[84]  Sergio I. Molina,et al.  Large-format fused deposition additive manufacturing: a review , 2019 .

[85]  H. S. Mali,et al.  Abrasive flow finishing of FDM printed parts using a sustainable media , 2018 .

[86]  Hao Liu,et al.  A novel process planning algorithm for additive and subtractive manufacturing based on skeleton tree matching , 2018 .

[87]  Vimal Dhokia,et al.  A novel decision-making logic for hybrid manufacture of prismatic components based on existing parts , 2017, J. Intell. Manuf..

[88]  Afif Batal,et al.  Laser polishing of 3D printed mesoscale components , 2017 .

[89]  D. Kramar,et al.  Optimization of Hybrid Manufacturing for Surface Quality, Material Consumption and Productivity Improvement , 2017 .

[90]  Rupinder Singh,et al.  Development and surface improvement of FDM pattern based investment casting of biomedical implants: A state of art review , 2018 .

[91]  V. L. Melton,et al.  Abrasive flow finishing of stereolithography prototypes , 1998 .

[92]  Zhanqiang Liu,et al.  Surface polish of PLA parts in FDM using dichloromethane vapour , 2017 .

[93]  F. Liou,et al.  Modeling of worn surface geometry for engine blade repair using Laser-aided Direct Metal Deposition process , 2018 .

[94]  Ruth Jill Urbanic,et al.  Material bead deposition with 2 + 2 ½ multi-axis machining process planning strategies with virtual verification for extruded geometry , 2018 .

[95]  Doo-Sun Choi,et al.  3D welding and milling: Part I-a direct approach for freeform fabrication of metallic prototypes , 2005 .

[96]  Wei-Chen Lee,et al.  Design of a Hybrid 5-Axis Machine Tool with Fused-Deposition-Modeling Capability , 2013 .

[97]  Vimal Dhokia,et al.  Using formal methods to model hybrid manufacturing processes , 2012 .

[98]  J. Nellesen,et al.  Hot isostatic pressing of IN718 components manufactured by selective laser melting , 2017 .

[99]  Patrice Peyre,et al.  Tailoring residual stress profile of Selective Laser Melted parts by Laser Shock Peening , 2017 .

[100]  Toly Chen,et al.  Ubiquitous manufacturing , 2017 .

[101]  Sanjay G. Dhande,et al.  Virtual hybrid-FDM system to enhance surface finish , 2006 .

[102]  Jenn‐Ming Yang,et al.  Improving the surface quality and mechanical properties by shot-peening of 17-4 stainless steel fabricated by additive manufacturing , 2016 .

[103]  Z. Y. Liu,et al.  Surface integrity of Inconel 718 by hybrid selective laser melting and milling , 2018 .

[104]  T. Niendorf,et al.  Functional encapsulation of laser melted Inconel 718 by Arc-PVD and HVOF for post compacting by hot isostatic pressing , 2015 .

[105]  Sehyung Park,et al.  3D welding and milling: part II—optimization of the 3D welding process using an experimental design approach , 2005 .

[106]  Makoto Fujishima,et al.  Study on Consistently Optimum Deposition Conditions of Typical Metal Material Using Additive/Subtractive Hybrid Machine Tool☆ , 2016 .

[107]  Frank W. Liou,et al.  Research and Development of a Hybrid Rapid Manufacturing Process , 2001 .

[108]  Debasish Dutta,et al.  On the Integration of Layered Manufacturing and Material Removal Processes , 2000 .

[109]  N. Venkata Reddy,et al.  Improvement of surface finish by staircase machining in fused deposition modeling , 2003 .

[110]  Rajiv S. Mishra,et al.  Friction stir additive manufacturing for high structural performance through microstructural control in an Mg based WE43 alloy , 2015 .

[111]  Giuseppe Ingarao,et al.  Integrated WAAM-Subtractive Versus Pure Subtractive Manufacturing Approaches: An Energy Efficiency Comparison , 2020, International Journal of Precision Engineering and Manufacturing-Green Technology.

[112]  Guilan Wang,et al.  Metal direct prototyping by using hybrid plasma deposition and milling , 2009 .

[113]  Jean-Yves Hascoët,et al.  Manufacturability analysis to combine additive and subtractive processes , 2010 .

[114]  Vamsi K. Yadavalli,et al.  Surface modification of fused deposition modeling ABS to enable rapid prototyping of biomedical microdevices , 2013 .

[115]  Alberto Boschetto,et al.  Roughness prediction in coupled operations of fused deposition modeling and barrel finishing , 2015 .

[116]  K. P. Karunakaran,et al.  Hybrid layered manufacturing: Direct rapid metal tool-making process , 2004 .

[117]  Albert C. To,et al.  Topology optimization for hybrid additive-subtractive manufacturing , 2017 .

[118]  Paul A. Colegrove,et al.  The effectiveness of combining rolling deformation with Wire–Arc Additive Manufacture on β-grain refinement and texture modification in Ti–6Al–4V , 2016 .

[119]  Wenwu Zhang,et al.  Cracks Repairing by Using Laser Additive and Subtractive Hybrid Manufacturing Technology , 2020 .

[120]  Wang Guilan,et al.  HDMR technology for the aircraft metal part , 2016 .

[121]  Guillaume Mandil,et al.  Process planning for combined additive and subtractive manufacturing technologies in a remanufacturing context , 2017 .

[122]  A. Rudenko,et al.  Additive and Substractive Surface Structuring by Femtosecond Laser Induced Material Ejection and Redistribution , 2018, Materials.

[123]  Guillaume Mandil,et al.  Extracting features for manufacture of parts from existing components based on combining additive and subtractive technologies , 2018 .

[124]  Richard A. Wysk,et al.  Development of a modular computer-aided process planning (CAPP) system for additive-subtractive hybrid manufacturing of pockets, holes, and flat surfaces , 2018 .

[125]  Masahiko Mori,et al.  Innovative grid molding and cooling using an additive and subtractive hybrid CNC machine tool , 2017 .

[126]  Vimal Dhokia,et al.  Investigation of part distortions as a result of hybrid manufacturing , 2016 .

[127]  R. Hellmann,et al.  Areal Surface Roughness Optimization of Maraging Steel Parts Produced by Hybrid Additive Manufacturing , 2020, Materials.

[128]  Sam Anand,et al.  Geometric Complexity Based Process Selection for Hybrid Manufacturing , 2017 .

[129]  Bin Xu,et al.  Topology optimization of continuum structures under hybrid additive-subtractive manufacturing constraints , 2019, Structural and Multidisciplinary Optimization.

[130]  L. Hao,et al.  Effect of hot isostatic pressing (HIP) on Al composite parts made from laser consolidated Al/Fe2O3 powder mixtures , 2012 .

[131]  Raisuddin Khan,et al.  Design and development of a hybrid machine combining rapid prototyping and CNC milling operation , 2017 .

[132]  C. Leone,et al.  Laser finishing of 3D printed parts produced by material extrusion , 2020 .

[133]  P. Jain,et al.  Part surface quality improvement studies in fused deposition modelling process: a review , 2020, Australian Journal of Mechanical Engineering.

[134]  M. Muzzupappa,et al.  Additive-incremental forming hybrid manufacturing technique to improve customised part performance , 2019, Journal of Manufacturing Processes.

[135]  D. I. Wimpenny,et al.  Remanufacture of turbine blades by laser cladding, machining and in-process scanning in a single machine , 2012 .

[136]  Bruce L. Tai,et al.  Electrochemical polishing of selective laser melted Inconel 718 , 2019, Procedia Manufacturing.

[137]  K. P. Karunakaran,et al.  Low cost integration of additive and subtractive processes for hybrid layered manufacturing , 2010 .

[138]  JongWon Kim,et al.  Hybrid rapid prototyping system using machining and deposition , 2002, Comput. Aided Des..

[139]  Yung C. Shin,et al.  Remanufacturing of turbine blades by laser direct deposition with its energy and environmental impact analysis , 2014 .

[140]  Bi Zhang,et al.  Machining characteristics of 18Ni-300 steel in additive/subtractive hybrid manufacturing , 2018 .

[141]  Lin Li,et al.  A novel 6-axis hybrid additive-subtractive manufacturing process: Design and case studies , 2018, Journal of Manufacturing Processes.

[142]  Jasgurpreet Singh Chohan,et al.  Pre and post processing techniques to improve surface characteristics of FDM parts: a state of art review and future applications , 2017 .

[143]  Svetan Ratchev,et al.  A decision support methodology for embodiment design and process chain selection for hybrid manufacturing platforms , 2016 .

[144]  Dichen Li,et al.  A novel method for improving surface finish of stereolithography apparatus , 2017 .

[145]  P. Jain,et al.  CNC-assisted selective melting for improved surface finish of FDM parts , 2016 .

[146]  Jean-Yves Hascoët,et al.  A new DFM approach to combine machining and additive manufacturing , 2011, ArXiv.

[147]  Vimal Dhokia,et al.  A Methodology for the Estimation of Build Time for Operation Sequencing in Process Planning for a Hybrid Process , 2013 .

[148]  Yan-Lin Liu,et al.  A surface quality improvement apparatus for ABS parts fabricated by additive manufacturing , 2017 .

[149]  Guilan Wang,et al.  Direct rapid high-temperature alloy prototyping by hybrid plasma-laser technology , 2008 .

[150]  Volker Wesling,et al.  Single-crystal turbine blade tip repair by laser cladding and remelting , 2017 .

[151]  Anirban Bhattacharya,et al.  Effect of cold vapour treatment on geometric accuracy of fused deposition modelling parts , 2017 .

[152]  Fernando Fraternali,et al.  Investigation for surface finish improvement of FDM parts by vapor smoothing process , 2017 .

[153]  S. Pannala,et al.  The metallurgy and processing science of metal additive manufacturing , 2016 .

[154]  Guilan Wang,et al.  Hybrid direct manufacturing method of metallic parts using deposition and micro continuous rolling , 2013 .

[155]  Saigopal Nelaturi,et al.  Automated Process Planning for Hybrid Manufacturing , 2018, Comput. Aided Des..

[156]  F. Liou,et al.  Development of a Hybrid Manufacturing process for Precision Metal Parts Missouri University of Science and Technology Laser Aided Manufacturing Processes Laboratory , 2017 .

[157]  Fabrication of Cemented Carbide Molds with Internal Cooling Channels Using Hybrid Process of Powder Layer Compaction and Milling , 2005 .

[158]  Bharat Bhushan,et al.  An overview of additive manufacturing (3D printing) for microfabrication , 2017 .

[159]  Todd A. Book,et al.  Evaluation of Select Surface Processing Techniques for In Situ Application During the Additive Manufacturing Build Process , 2016 .

[160]  Paul A. Colegrove,et al.  Application of bulk deformation methods for microstructural and material property improvement and residual stress and distortion control in additively manufactured components , 2017 .

[161]  Eujin Pei,et al.  Effect of post-processing on the dimensional accuracy of small plastic additive manufactured parts , 2019, Rapid Prototyping Journal.

[162]  Frank W. Liou,et al.  Integrated Process Planning for a Multiaxis Hybrid Manufacturing System , 2010 .

[163]  H. Hadidi,et al.  Effect of process parameters and shot peening on mechanical behavior of ABS parts manufactured by fused filament fabrication (FFF) , 2020 .

[164]  Omar Ahmed Mohamed,et al.  Optimization of fused deposition modeling process parameters: a review of current research and future prospects , 2015, Advances in Manufacturing.

[165]  Paul A. Colegrove,et al.  Interpass rolling of Ti-6Al-4V wire + arc additively manufactured features for microstructural refinement , 2018 .

[166]  T. Gutowski,et al.  Electrical energy and material efficiency analysis of machining, additive and hybrid manufacturing , 2020 .

[167]  Manjinder Singh,et al.  Surface roughness improvement of cast components in vacuum moulding by intermediate barrel finishing of fused deposition modelling patterns , 2017 .

[168]  Muzheng Xiao,et al.  Study of hybrid additive manufacturing based on pulse laser wire depositing and milling , 2017 .

[169]  Simon Ford,et al.  Additive manufacturing and sustainability: an exploratory study of the advantages and challenges , 2016 .

[170]  Frank W. Liou,et al.  Applications of a hybrid manufacturing process for fabrication of metallic structures , 2007 .

[171]  Vimal Dhokia,et al.  Process planning for additive and subtractive manufacturing technologies , 2015 .

[172]  Francesco Modica,et al.  Surface Finish Improvement of Additive Manufactured Metal Parts , 2018 .

[173]  Hoda A. ElMaraghy,et al.  Optimal platform design and process plan for managing variety using hybrid manufacturing , 2019, CIRP Annals.

[174]  K. Osakada,et al.  Residual Stress within Metallic Model Made by Selective Laser Melting Process , 2004 .

[175]  R. Poprawe,et al.  Laser additive manufacturing of metallic components: materials, processes and mechanisms , 2012 .

[176]  Mohsen Badrossamay,et al.  Optimization of the printing parameters affecting dimensional accuracy and internal cavity for HIPS material used in fused deposition modeling processes , 2015 .

[177]  Osama Abdelaal,et al.  Polishing of fused deposition modeling products by hot air jet: Evaluation of surface roughness , 2018 .

[178]  Guillaume Mandil,et al.  The development of a strategy for direct part reuse using additive and subtractive manufacturing technologies , 2018, Additive Manufacturing.

[179]  James B. Taylor,et al.  Contoured edge slice generation in rapid prototyping via 5-axis machining , 2001 .

[180]  A. K. Sood,et al.  Metallization on FDM Parts Using the Chemical Deposition Technique , 2014 .

[181]  Patrice Peyre,et al.  3D Laser Shock Peening – A new method for the 3D control of residual stresses in Selective Laser Melting , 2017 .

[183]  V. Popov,et al.  Hybrid additive manufacturing of steels and alloys , 2020, Manufacturing Review.

[184]  Michael P Sealy,et al.  Hybrid Processes in Additive Manufacturing , 2018 .

[185]  David W. Rosen,et al.  Additive/Subtractive Manufacturing Research and Development in Europe , 2004 .

[186]  Matthew C. Frank,et al.  Process planning for hybrid additive and subtractive manufacturing to integrate machining and directed energy deposition , 2019, Procedia Manufacturing.

[187]  Moataz M. Attallah,et al.  Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti–6Al–4V , 2013 .

[188]  Vimal Dhokia,et al.  Strategies to realize decentralized manufacture through hybrid manufacturing platforms , 2017 .

[189]  Joshua D. Gale,et al.  Application of ultrasonic peening during DMLS production of 316L stainless steel and its effect on material behavior , 2017 .

[190]  J. Jeng,et al.  Mold fabrication and modification using hybrid processes of selective laser cladding and milling , 2001 .

[191]  A. Fiorentino,et al.  Characterization of chemical surface finishing with cold acetone vapours on ABS parts fabricated by FDM , 2019, Production Engineering.

[192]  S. H. Mian,et al.  Novel dynamic CAPP system for hybrid additive–subtractive–inspection process , 2018, Rapid Prototyping Journal.

[193]  Jean-Yves Dantan,et al.  Geometrical deviation identification and prediction method for additive manufacturing , 2018, Rapid Prototyping Journal.

[194]  Matthew C. Frank,et al.  Automated post machining process planning for a new hybrid manufacturing method of additive manufacturing and rapid machining , 2018, Rapid Prototyping Journal.

[195]  J. Kruth,et al.  The investigation of the influence of laser re‐melting on density, surface quality and microstructure of selective laser melting parts , 2011 .

[196]  Frank W. Liou,et al.  Aerospace applications of laser additive manufacturing , 2017 .

[197]  S. T. Newman,et al.  A novel process planning approach for hybrid manufacturing consisting of additive, subtractive and inspection processes , 2012, 2012 IEEE International Conference on Industrial Engineering and Engineering Management.

[198]  Tanveer Saleh,et al.  Improvement of Dimensional Accuracy of 3-D Printed Parts using an Additive/Subtractive Based Hybrid Prototyping Approach , 2017 .

[199]  Frank W. Liou,et al.  Multi-axis tool path generation for surface finish machining of a rapid manufacturing process , 2014 .

[200]  Jianzhong Fu,et al.  Fused deposition modeling five-axis additive manufacturing: machine design, fundamental printing methods and critical process characteristics , 2018 .

[202]  J. Berger,et al.  Effect of Process Parameters and Shot Peening on the Tensile Strength and Deflection of Polymer Parts Made using Mask Image Projection Stereolithography (MIP-SLA) , 2020 .