Microstructure tailoring for property improvements by grain boundary engineering

Abstract Grain boundary engineering (GBE) was employed to improve materials properties such as corrosion resistance and strength by optimizing the grain boundary character distribution. Two high-temperature alloys, designated Incoloy 800H and Inconel 617 were selected in this study due to their potential applications for the Generation IV nuclear power systems. The GBE treatments on the alloys 800H and 617 were accomplished by a series of thermomechanical processing. The effect of the GBE treatments on the corrosion resistance and mechanical properties of the materials were evaluated using supercritical water exposure tests, cyclic oxidation tests, impact tests, and tensile tests. The microstructures of the tested samples were analyzed by means of optical microscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, electron backscatter diffraction, X-ray photoelectron spectroscopy, and grazing incidence X-ray diffraction. The results indicate that the GBE treatments greatly mitigated the oxide exfoliation of the alloy 800H and reduced the oxidation rate of the alloy 617. The GBE treatment also greatly enhanced the strength of alloy 800H at room temperature (e.g. impact tests) and high-temperatures (e.g. tensile tests after neutron irradiation), but did not significantly impair the material’s ductility.

[1]  Todd R. Allen,et al.  The effect of grain boundary engineering on the oxidation behavior of INCOLOY alloy 800H in supercritical water , 2006 .

[2]  P. Lin,et al.  Improving the weldability and service performance of nickel-and iron-based superalloys by grain boundary engineering , 1998 .

[3]  S. J. Rothman,et al.  Self-diffusion in austenitic Fe-Cr-Ni alloys , 1980 .

[4]  H. Ryoo,et al.  A grain boundary engineering approach to promote special boundaries in Pb-base alloy , 2003 .

[5]  Hiroyuki Kokawa,et al.  Optimization of grain boundary character distribution for intergranular corrosion resistant 304 stainless steel by twin-induced grain boundary engineering , 2002 .

[6]  V. Randle,et al.  The Role of the Coincidence Site Lattice in Grain Boundary Engineering , 1996 .

[7]  S. M. Bruemmer,et al.  Study of grain boundary character along intergranular stress corrosion crack paths in austenitic alloys , 2001 .

[8]  U. Schwertmann,et al.  The Iron Oxides: Structure, Properties, Reactions, Occurrences and Uses , 2003 .

[9]  L. Tan,et al.  An electron backscattered diffraction study of grain boundary-engineered INCOLOY alloy 800H , 2005 .

[10]  P. King,et al.  On annealing twins and CSL distributions in F.C.C. polycrystals , 1992 .

[11]  J. Lindgren.  Irradiation effects on high-temperature gas-cooled reactor structural materials , 1984 .

[12]  U. Schwertmann,et al.  Iron Oxides , 2003, SSSA Book Series.

[13]  W. Boettinger,et al.  Development of a Diffusion Mobility Database for Co-Based Superalloys , 2002, Journal of Phase Equilibria and Diffusion.

[14]  K. Sridharan,et al.  Effect of thermomechanical processing on grain boundary character distribution of a Ni-based superalloy , 2007 .

[15]  B. Adams,et al.  Grain-boundary structure effects on intergranular stress corrosion cracking of alloy X-750 , 1996 .

[16]  S. Clark,et al.  Handbook of physical constants , 1966 .

[17]  S. Tsurekawa,et al.  The control of brittleness and development of desirable mechanical properties in polycrystalline systems by grain boundary engineering , 1999 .

[18]  S. Jacobsen,et al.  Sound velocities and elastic constants of ZnAl2O4 spinel and implications for spinel-elasticity systematics , 2006 .

[19]  S. Stølen,et al.  Equation of state of magnetite and its high-pressure modification: Thermodynamics of the Fe-O system at high pressure , 2000 .

[20]  U. S. Doe.  A Technology Roadmap for Generation IV Nuclear Energy Systems , 2002 .

[21]  Valerie Randle,et al.  Mechanism of twinning-induced grain boundary engineering in low stacking-fault energy materials , 1999 .

[22]  P. Flewitt,et al.  Grain Boundaries: Their Microstructure and Chemistry , 2001 .