The effect of supply system on the wood paying capability of a kraft pulp mill using Scots pine harvested from first thinnings

The efficiencies of wood supply systems based on cut-to-length (CTL) harvesting, the harvesting of loose whole trees, and whole-tree bundling were compared using the relative wood paying capabilities (WPC) of a kraft pulp mill as decisive criteria. The WPCs from mill to stump were calculated for three first-thinning stands of Scots pine (Pinus sylvestris L.) with mean breast-height diameter of the removal of 6, 8, and 12 cm. Pulp price had a strong effect on the WPC, and the CTL system resulted in the highest WPC per m3 at stump. The savings in procurement costs and gains in energy generation from additional raw material acquired with the harvesting of loose whole trees did not compensate the losses in pulp production. Considering removal per hectare, loose whole trees gave the highest WPCs at stump in the two stands with the smallest trees and the highest proportion of additional raw material. Decrease in pulp price and increase in energy price improved the competitiveness of the whole-tree systems. In the case of whole-tree bundling, savings in transportation costs did not balance the high cutting and compaction costs, and the bundling system was the least competitive alternative.

[1]  Matti Kärkkäinen.  Puun ja kuoren tiheys ja kosteus sekä kuoren osuus koivun, kuusen ja männyn oksissa. , 1976 .

[2]  Jouko Laasasenaho.  Taper curve and volume functions for pine, spruce and birch [Pinus sylvestris, Picea abies, Betula pendula, Betula pubescens] , 1982 .

[3]  Metsäntutkimuslaitos.  Communicationes Instituti Forestalis Fenniae , 1982 .

[4]  P. Hakkila.  Utilization of Residual Forest Biomass , 1989 .

[5]  Bryce J. Stokes,et al.  Glossary of Terms Used in Timber Harvesting and Forest Engineering , 1989 .

[6]  Jb Hudson,et al.  Integrated harvesting systems , 1992 .

[7]  P. Harstela,et al.  Forest work science and technology. Part 1 , 1993 .

[8]  Juha Nurmi,et al.  Heating values of the above ground biomass of small-sized trees. , 1993 .

[9]  G. D. Puttock.  Estimating cost for integrated harvesting and related forest management activities , 1995 .

[10]  Pentti Hakkila,et al.  Etelä-Suomen ensiharvennusmänniköt kuitu- ja energialähteenä , 1995 .

[11]  M. Kukkola,et al.  Growth response of coniferous stands to whole-tree harvesting in early thinnings. , 1996 .

[12]  Enso Oyj,et al.  Economics of the pulp and paper industry , 1998 .

[13]  D. J. Mead,et al.  Production of forest energy , 2002 .

[14]  P. Hakkila,et al.  Bioenergy from Sustainable Forestry , 2002, Forestry Sciences.

[15]  Dominik Röser,et al.  Wood fuel resources and bottlenecks of utilization in Baltic and Nordic countries. , 2003 .

[16]  Han-Sup Han,et al.  Economic feasibility of an integrated harvesting system for small-diameter trees in Southwest Idaho , 2004 .

[17]  P. Hakkila,et al.  Fuel From Early Thinnings , 2005 .

[18]  P. Jylhä,et al.  Properties of bundled tree sections of young scots pine in debarking, chipping, and pulping , 2006 .

[19]  Antti Ihalainen,et al.  Suomen metsävarat metsäkeskuksittain 2004–2006 ja metsävarojen kehitys 1996–2006 , 2007 .

[20]  Juha Laitila,et al.  Forwarding of Whole Trees After Manual and Mechanized Felling Bunching in Pre-Commercial Thinnings , 2007 .

[21]  Jaakko Heinonen,et al.  Characteristics and time consumption of timber trucking in Finland , 2007 .

[22]  Juha Laitila,et al.  Energy wood and pulpwood harvesting from young stands using a prototype whole-tree bundler , 2007 .

[23]  W. Dale Greene,et al.  Evaluation of integrated harvesting systems in pine stands of the southern United States , 2010 .

[24]  Juha Laitila,et al.  Harvesting Technology and the Cost of Fuel Chips from Early Thinnings , 2008 .

[25]  K. Kärhä,et al.  Effect of raw wood supply system on the wood paying capability of a kraft pulp mill using Scots pine , 2009 .

[26]  Kalle Kärhä,et al.  Time consumption models and parameters for off- and on-road transportation of whole-tree bundles. , 2009 .

[27]  Per Fors.  The German, Swedish and UK wood based bio energy markets from an investment perspective , 2009 .

[28]  Natascia Magagnotti,et al.  Comparison of two harvesting systems for the production of forest biomass from the thinning of Picea abies plantations , 2010 .

[29]  T. Palander,et al.  Analyzing the views of wood harvesting professionals related to the approaches for increasing the cost-efficiency of wood harvesting from young stands. , 2010 .

[30]  Kalle Kärhä,et al.  Productivity of whole-tree bundler in energy wood and pulpwood harvesting from early thinnings , 2011 .

[31]  Kalle Kärhä,et al.  Integrated procurement of pulpwood and energy wood from early thinnings using whole-tree bundling. , 2011 .