Structure-property relationships of common aluminum weld alloys utilized as feedstock for GMAW-based 3-D metal printing

The relationship between microstructure and properties is not widely assessed in parts produced by additive manufacturing, particularly for aluminum. These relationships can be used by engineers to develop new materials, additive processes, and additively manufactured parts for a variety of applications. Thus, the tensile, compressive, and microstructural properties of common aluminum weld filler alloys (ER1100, ER4043, ER4943, ER4047, and ER5356) were evaluated following gas metal arc weld (GMAW)-based metal 3-D printing to identify optimal alloy systems for this type of additive manufacturing. The porosities in all test specimens were found to be less than 2%, with interdendritic shrinkage in 4000 series alloys vs. intergranular shrinkage in 5356. The 4000 series alloys performed better than 1100 and 5356 with respect to printed bead width, porosity, strength, and defect sensitivity. In comparison to standard wrought and weld alloys, the 3-D printed specimens exhibited similar or superior mechanical properties with only minor exceptions. Long print times allow for stress relieving and annealing that improved the print properties of the 4000 series and 5356 alloys. Overall the GMAW-based 3-D parts printed from aluminum alloys exhibited similar mechanical properties to those fabricated using more conventional processing techniques.

[1]  K. Chawla,et al.  Mechanical Behavior of Materials , 1998 .

[2]  Rhys Jones,et al.  RepRap – the replicating rapid prototyper , 2011, Robotica.

[3]  Timothy C. Havens,et al.  Low-Cost Open-Source Voltage and Current Monitor for Gas Metal Arc Weld 3D Printing , 2015, J. Sensors.

[4]  K. Osakada,et al.  Rapid Manufacturing of Metal Components by Laser Forming , 2006 .

[5]  M.A. Staley,et al.  Physical Metallurgy and the Effect of Alloying Additions in Aluminum Alloys , 2003 .

[6]  F. C. Campbell.  Elements of Metallurgy and Engineering Alloys , 2008 .

[7]  Joshua M. Pearce,et al.  3-D Printing of Open Source Appropriate Technologies for Self-Directed Sustainable Development , 2010, Journal of Sustainable Development.

[8]  Joshua M. Pearce,et al.  Integrated Voltage—Current Monitoring and Control of Gas Metal Arc Weld Magnetic Ball-Jointed Open Source 3-D Printer , 2015 .

[9]  John Irwin,et al.  Life-cycle economic analysis of distributed manufacturing with open-source 3-D printers , 2013, Mechatronics.

[10]  L. Arnberg,et al.  Density and solidification shrinkage of hypoeutectic aluminum-silicon alloys , 2001 .

[11]  E. Lavernia,et al.  Solidification behavior of an Al-6Si alloy during spray atomization and deposition , 1994 .

[12]  Joshua M. Pearce,et al.  Substrate release mechanisms for gas metal arc weld 3D aluminum metal printing , 2014 .

[13]  M. Brochu,et al.  Solid freeform fabrication of Al–Si components via the CSC-MIG process , 2012 .

[14]  L. Murr,et al.  Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies , 2012 .

[15]  K. Easterling.  Introduction to the physical metallurgy of welding , 1983 .

[16]  Frank W. Liou,et al.  Laser metal forming processes for rapid prototyping - A review , 2000 .

[17]  Ilgyou Shin,et al.  Possible origin of the discrepancy in Peierls stresses of fcc metals: First-principles simulations of dislocation mobility in aluminum , 2013 .

[18]  Dominique Bouchard,et al.  Prediction of dendrite arm spacings in unsteady-and steady-state heat flow of unidirectionally solidified binary alloys , 1997 .

[19]  Andreas Gebhardt,et al.  Rapid prototyping , 2003 .

[20]  R. P. Agarwala,et al.  Diffusion of iron, nickel and cobalt in aluminum , 1962 .

[21]  Robert F. Singer,et al.  Cellular Titanium by Selective Electron Beam Melting , 2007 .

[22]  F. Ribeiro,et al.  3D printing with metals , 1998 .

[23]  Joshua M. Pearce,et al.  Building Research Equipment with Free, Open-Source Hardware , 2012, Science.

[24]  Joshua M. Pearce,et al.  A Low-Cost Open-Source Metal 3-D Printer , 2013, IEEE Access.

[25]  Tapio Ala-Nissila,et al.  Modeling Self-Organization of Thin Strained Metallic Overlayers from Atomic to Micron Scales , 2013 .

[26]  Joshua M. Pearce,et al.  In situ formation of substrate release mechanisms for gas metal arc weld metal 3-D printing , 2015 .

[27]  J. Hatch,et al.  Aluminum: Properties and Physical Metallurgy , 1984 .

[28]  Neil Gershenfeld,et al.  FAB: The Coming Revolution on Your Desktop--from Personal Computers to Personal Fabrication , 2005 .

[29]  K. Easterling,et al.  Phase Transformations in Metals and Alloys , 2021 .

[30]  R. B. Wicker,et al.  Advanced metal powder based manufacturing of complex components by electron beam melting , 2009 .

[31]  J. Kaufman,et al.  Properties of Aluminum Alloys: Tensile, Creep, and Fatigue Data at High and Low Temperatures , 2000 .

[32]  Thomas Birtchnell,et al.  3D Printing for Development in the Global South: The 3D4D Challenge , 2014 .

[33]  G. K. Lewis,et al.  Practical considerations and capabilities for laser assisted direct metal deposition , 2000 .

[34]  J. Delgado,et al.  Comparison of forming manufacturing processes and selective laser melting technology based on the mechanical properties of products , 2011 .

[35]  Lin Wu,et al.  Three-dimensional finite element analysis of thermal stress in single-pass multi-layer weld-based rapid prototyping , 2012 .

[36]  Adrian Bowyer,et al.  RepRap: The Replicating Rapid Prototyper: Maximizing Customizability by Breeding the Means of Production , 2010 .

[37]  R. Ambriz,et al.  Welding of Aluminum Alloys , 2011 .

[38]  A. K. Dahle,et al.  Iron-rich intermetallic phases and their role in casting defect formation in hypoeutectic Al-Si alloys , 2005 .

[39]  Lin Wu,et al.  A 3D dynamic analysis of thermal behavior during single-pass multi-layer weld-based rapid prototyping , 2011 .

[40]  Joshua M. Pearce.  Open-Source Lab: How to Build Your Own Hardware and Reduce Research Costs , 2013 .

[41]  J. F. Lancaster,et al.  Metallurgy of Welding , 1980 .

[42]  F. Hauser,et al.  Deformation and Fracture Mechanics of Engineering Materials , 1976 .

[43]  BowyerAdrian,et al.  3D Printing and Humanity's First Imperfect Replicator , 2014 .