Polysulfone–aerosil composite membranes: Part 2. The influence of the addition of aerosil on the skin characteristics and membrane properties
暂无分享,去创建一个
P. Jacobs | I. Vankelecom | P. Aerts | I. Genné | R. Leysen | S. Kuypers
[1] C. Vandecasteele,et al. Salt retention of Zirfon® membranes , 1998 .
[2] R. Leysen,et al. Evaluation of the Zirfon® separator for use in alkaline water electrolysis and Ni-H2 batteries , 1998 .
[3] W. Koros,et al. Occlusion of pores of polymeric membranes with colloidal silica , 1997 .
[4] R. Leysen,et al. A comparison between polysulfone, zirconia and organo-mineral membranes for use in ultrafiltration , 1996 .
[5] I. Genné,et al. Effect of the addition of ZrO2 to polysulfone based UF membranes , 1996 .
[6] Ivo F. J. Vankelecom,et al. INFLUENCE OF ZEOLITES IN PDMS MEMBRANES - PERVAPORATION OF WATER/ALCOHOL MIXTURES , 1995 .
[7] Lorraine F. Francis,et al. Addition of alumina to cellulose acetate membranes , 1995 .
[8] I. Genné,et al. Surface characteristics of Zirfon® composite ultrafiltration membranes , 1995 .
[9] O. F. V. Meien,et al. Ultrafiltration model for partial solute rejection in the limiting flux region , 1994 .
[10] C. A. Smolders,et al. Preparation of zeolite filled glassy polymer membranes , 1994 .
[11] G. Belfort,et al. Use of the log-normal probability density function to analyze membrane pore size distributions: functional forms and discrepancies , 1994 .
[12] A. Fane,et al. Low voltage scanning electron microscopy in membrane research , 1994 .
[13] C. Vandecasteele,et al. Pervaporation behaviour of chlorinated hydrocarbons through organophilic membranes , 1993 .
[14] R. Boom. Membrane formation by immersion precipitation: The role of a polymeric additive , 1992 .
[15] S. Mochizuki,et al. Dextran transport through asymmetric ultrafiltration membranes: Comparison with hydrodynamic models , 1992 .
[16] S. Hwang,et al. Formation of asymmetric polysulfone membranes by immersion precipitation. Part I. Modelling mass transport during gelation , 1992 .
[17] S. Hwang,et al. Formation of asymmetric polysulfone membranes by immersion precipitation. Part II. The effects of casting solution and gelation bath compositions on membrane structure and skin formation , 1992 .
[18] K. Peinemann,et al. Molecular sieving effect of the zeolite-filled silicone rubber membranes in gas permeation , 1991 .
[19] M. Meireles,et al. A contribution to the translation of retention curves into pore size distributions for sieving membranes , 1990 .
[20] C. Tsay,et al. Mass transfer modeling of asymmetric membrane formation by phase inversion , 1990 .
[21] P. Aimar,et al. Transfer of dextran through ultrafiltration membranes: a study of rejection data analysed by gel permeation chromatography , 1989 .
[22] G. Schock,et al. Characterization of ultrafiltration membranes: cut-off determination by gel permeation chromatography☆ , 1989 .
[23] H. Balmann,et al. The deformation of dextran molecules. Causes and consequences in ultrafiltration , 1989 .
[24] C. A. Smolders,et al. Zeolite-filled silicone rubber membranes : Part 1. Membrane preparation and pervaporation results , 1987 .
[25] C. A. Smolders,et al. Formation of membranes by means of immersion precipitation : Part II. the mechanism of formation of membranes prepared from the system cellulose acetate-acetone-water , 1987 .
[26] C. A. Smolders,et al. Formation of membranes by means of immersion precipitation : Part I. A model to describe mass transfer during immersion precipitation , 1987 .
[27] C. A. Smolders,et al. Phase separation phenomena in solutions of polysulfone in mixtures of a solvent and a nonsolvent: relationship with membrane formation* , 1985 .
[28] C. A. Smolders,et al. A rationale for the preparation of asymmetric pervaporation membranes , 1985 .
[29] W. L. Thayer,et al. Polysulfone ultrafiltration membranes , 1983 .
[30] A. Haute,et al. The use of direct osmosis tests as complementary experiments to determine the water and salt permeabilities of reinforced cellulose acetate membranes , 1978 .
[31] J. Anderson,et al. Mathematical analysis of factors influencing the skin thickness of asymmetric reverse osmosis membranes , 1973 .
[32] R. Rothon. Particulate-filled Polymer Composites , 1995 .
[33] H. Gregor,et al. Modelling of the pore size distribution of ultrafiltration membranes , 1985 .
[34] H. Finken. Bentonite-stabilized CDA/CTA membranes: I. Improved long-term transport properties , 1983 .
[35] Anthony G. Fane,et al. The relationship between membrane surface pore characteristics and flux for ultrafiltration membranes , 1981 .