RFID behavior study in enclosed marine container for real time temperature tracking

The performance of radio waves in open environments has been studied for years. In contrast, the behavior of Radio Frequency Identification (RFID) inside metal enclosed areas is not yet understood. This research project focuses on the 3-D mapping of RFID signal strength inside a 12 m refrigerated marine container instrumented with three different types of radio frequency (RF) emitters: 915 MHz reader; 2.45 GHz reader and 433 MHz RF transmitter. The main goal is to find a frequency/configuration that would allow real time reading of the temperature in a shipment of perishable products using RFID. Only one frequency and one antenna were used at a time. The RF transmitter antenna was mounted at two different places inside the container; at the top of the front wall (facing back) and on the ceiling in the middle of the container (facing down). The signal strength was acquired by a spectrum analyzer and its antenna was mounted on a small electric cart inside the container. The cart was programmed to move along the length of the container and stop repeatedly, allowing three automated measures per position. All data were analyzed in terms of power level and attenuation. The maps showed that the RFID antenna positioned at the front of the container delivered slightly better results than the one in the middle of the ceiling. The results showed a significantly higher performance at the 433 MHz level.

[1]  Theodore S. Rappaport,et al.  UHF fading in factories , 1989, IEEE J. Sel. Areas Commun..

[2]  Reinaldo A. Valenzuela,et al.  Estimating local mean signal strength of indoor multipath propagation , 1997 .

[3]  P.V. Nikitin,et al.  Performance limitations of passive UHF RFID systems , 2006, 2006 IEEE Antennas and Propagation Society International Symposium.

[4]  W. Hedgepeth.  RFID Metrics: Decision Making Tools for Today's Supply Chains , 2006 .

[5]  Lukas W. Mayer,et al.  Measurements and channel modeling for short range indoor UHF applications , 2006, 2006 First European Conference on Antennas and Propagation.

[6]  R. L. Ott,et al.  A First Course in Statistical Methods , 2004 .

[7]  Sandip Lahiri,et al.  RFID Sourcebook , 2005 .

[8]  Anthony Furness,et al.  Improving traceability in food processing and distribution. , 2006 .

[9]  Roy Want,et al.  RFID Technology and Applications , 2006, IEEE Pervasive Computing.

[10]  K. Gourdin,et al.  Global Logistics Management: A Competitive Advantage for the 21st Century , 2006 .

[11]  J. P. Emond.  RFID Technology and Applications: The cold chain , 2008 .

[12]  Dafydd Gibbon,et al.  1 User’s guide , 1998 .

[13]  Henry L. Bertoni,et al.  Radio Propagation for Modern Wireless Systems , 1999 .

[14]  H.T. Friis,et al.  A Note on a Simple Transmission Formula , 1946, Proceedings of the IRE.

[15]  Christos G. Christodoulou,et al.  Radio propagation and adaptive antennas for wireless communication links : terrestrial, atmospheric and lonospheric [i.e. ionospheric] , 2007 .