Challenges in Fuel Injection for High-Speed Propulsion Systems

[1]  Joseph A. Schetz,et al.  Simulated fuel injection through a wedge-shaped orifice into supersonic flow , 1995 .

[2]  Yasuhiro Kamotani,et al.  Experiments on a Turbulent Jet in a Cross Flow , 1972 .

[3]  S.N.B. Murthy,et al.  Supersonic Flow Combustors , 2001 .

[4]  E. Gutmark,et al.  Passive combustion enhancement using non-circular jets - A review , 1997 .

[5]  J. Schetz,et al.  Flush-Wall, Diamond-Shaped Fuel Injector for High Mach Number Scramjets , 2008 .

[6]  J. Schetz,et al.  Effects of viscosity and surface tension on a jet plume in supersonic crossflow , 1984 .

[7]  He Huang,et al.  Fuel-Cooled Thermal Management for Advanced Aeroengines , 2004 .

[8]  E. A. Kush,et al.  Liquid Jet Injection into a Supersonic Flow , 1972 .

[9]  Christopher P. Goyne,et al.  Integrated Aeroramp-Injector/Plasma-Torch Igniter for Methane and Ethylene Fueled Scramjets , 2006 .

[10]  E. Geery,et al.  Penetration of a high-velocity gas stream by a water jet. , 1968 .

[11]  T Cain,et al.  Review of Experiments on Ignition and Flameholding in Supersonic Flow , 2002 .

[12]  Soshi Kawai,et al.  Large-Eddy Simulation of Jet Mixing in Supersonic Crossflows , 2010 .

[13]  Kuo-Cheng Lin,et al.  Effects of Flow Initial Conditions on Spray Characteristics With and Without Crossflows , 2006 .

[14]  C. Carter,et al.  Expansion and mixing processes of underexpanded supercritical fuel jets injected into superheated conditions , 1997 .

[15]  K. Jackson,et al.  Study on the Operability of Cavity Flameholders inside a Scramjet Combustor , 2009 .

[16]  Raymond P. Fuller,et al.  An investigation of advanced fuel injection schemes for scramjet combustion , 1998 .

[17]  Corin Segal,et al.  Penetration of Gaseous Jets in Supersonic Flows , 2006 .

[18]  James C. McDaniel,et al.  Quantitative investigation of compressible mixing - Staged transverse injection into Mach 2 flow , 1994 .

[19]  Dimitri Papamoschou,et al.  Observations of supersonic transverse jets , 1991 .

[20]  J. A. Schetz,et al.  Low angle injection into a supersonic flow , 1989 .

[21]  C. Carter,et al.  PRIMARY BREAKUP OF ROUND AERATED-LIQUID JETS IN SUPERSONIC CROSSFLOWS , 2006 .

[22]  Raymond P. Fuller,et al.  Spray Structures of Liquid Jets Atomized in Subsonic Crossflows , 1998 .

[23]  A. Lefebvre,et al.  Airblast Atomization: Effect of Linear Scale on Mean Drop Size , 1980 .

[24]  O. A. Powell,et al.  Development of Hydrocarbon-Fueled Scramjet Engines: The Hypersonic Technology (HyTech) Program , 2001 .

[25]  Tzong H. Chen,et al.  Multi-zone behavior of transverse liquid jet in high-speed flow , 1993 .

[26]  Ronald K. Hanson,et al.  Cavity Flame-Holders for Ignition and Flame Stabilization in Scramjets: An Overview , 2001 .

[27]  J. Lee.  A numerical study of mixing in supersonic combustors with hypermixing injectors , 1994 .

[28]  Thomas M. Krivanek,et al.  Design and Fabrication of the ISTAR Direct-Connect Combustor Experiment at the NASA Hypersonic Tunnel Facility , 2005 .

[29]  L. J. Chelko.  Penetration of liquid jets into a high-velocity air stream , 1950 .

[30]  Campbell D. Carter,et al.  Characteristics of Cavity-Stabilized Flames in a Supersonic Flow , 2005 .

[31]  I. Milanovic,et al.  Synthetic Jets in Cross-Flow , 2005 .

[32]  H. Pitsch,et al.  Detailed Numerical Simulations of Primary Atomization of Liquid Jets in Crossflow , 2009 .

[33]  R. C. Rogers,et al.  Mixing of hydrogen injected from multiple injectors normal to a supersonic airstream , 1971 .

[34]  A. Jakubowski,et al.  Mean droplet diameter resulting from atomization of a transverse liquid jet in a supersonic air stream , 1978 .

[35]  N. Georgiadis,et al.  Status of Turbulence Modeling for Hypersonic Propulsion Flowpaths , 2011 .

[36]  Richard J. Weber,et al.  An Analysis of Ramjet Engines Using Supersonic Combustion , 1958 .

[37]  J. Philip Drummond,et al.  Methods for Prediction of High-Speed Reacting Flows in Aerospace Propulsion , 2014 .

[38]  G. B. Northam,et al.  Evaluation of parallel injector configurations for Mach 2 combustion , 1992 .

[39]  Wright-Patterson Afb,et al.  Expansion of Supercritical Methane/Ethylene Jets in a Quiescent Subcritical Environment , 2003 .

[40]  John M. Seiner,et al.  Historical Survey on Enhanced Mixing in Scramjet Engines , 2001 .

[41]  Chung-Jen Tam,et al.  Gaseous and Liquid Injection into High-Speed Crossflows , 2005 .

[42]  C. Kannepalli,et al.  Scramjet Propulsive Flowpath Prediction Improvements Using Recent Modeling Upgrades , 2005 .

[43]  R. J. Margason,et al.  The path of a jet directed at large angles to a subsonic free stream , 1968 .

[44]  Christer Fureby,et al.  Large-Eddy Simulation: Current Capabilities, Recommended Practices, and Future Research , 2009 .

[45]  J. McDaniel,et al.  Planar Measurement Technique for Compressible Flows Using Laser-Induced Iodine Fluorescence , 1993 .

[46]  Campbell D. Carter,et al.  Flow Field Studies of Diamond Shaped Fuel Injector in a Supersonic Flow , 2007 .

[47]  Arthur H. Lefebvre,et al.  Spray characteristics of aerated-liquid pressure atomizers , 1988 .

[48]  John L. Lumley,et al.  Injection and Mixing in Turbulent Flow , 1980 .

[49]  Richard J. Margason,et al.  Fifty Years of Jet in Cross Flow Research , 1993 .

[50]  B. D. Pratte,et al.  Profiles of the Round Turbulent Jet in A Cross Flow , 1967 .

[51]  J. A. Schetz,et al.  Supersonic transverse injection into a supersonic stream. , 1968 .

[52]  F. P. Povinelli,et al.  Supersonic jet penetration /up to Mach 4/ into a Mach 2 airstream , 1970 .

[53]  J. Schetz,et al.  Effects of properties and location in the plume on droplet diameter for injection in a supersonic stream , 1983 .

[54]  William H. Heiser,et al.  Hypersonic Airbreathing Propulsion , 1994 .

[55]  C. Carter,et al.  Investigation of Droplet Nucleation Inside Supercritical Ethylene Jets Using Small Angle X-Ray Scattering (SAXS) Technique , 2010 .

[56]  D. Kenzakowski,et al.  Scalar Variance Transport in the Turbulence Modeling of Propulsive Jets , 2001 .

[57]  Jeffery A. Lovett,et al.  Development Needs for Advanced Afterburner Designs , 2004 .

[58]  R. Bowersox,et al.  Sonic Injection into a Mach 5.0 Freestream Through Diamond Orifices , 2004 .

[59]  A. Matsuo,et al.  Matched pressure injections into a supersonic crossflow through diamond-shaped orifices , 2008 .

[60]  R. C. Orth,et al.  An experimental and comparative study of jet penetration in supersonic flow. , 1967 .

[61]  T. Edwards.  Liquid Fuels and Propellants for Aerospace Propulsion: 1903-2003 , 2003 .

[62]  F. P. Povinelli,et al.  Correlation of secondary sonic and supersonic gaseous jet penetration into supersonic crossflows , 1971 .

[63]  Kuo-Cheng Lin,et al.  Penetration heights of liquid jets in high-speed crossflows , 2002 .

[64]  M. R. Gruber,et al.  Mixing and Penetration Studies of Sonic Jets in a Mach 2 Freestream , 1995 .

[65]  J. C. Dutton,et al.  Transverse Injection from Circular and Elliptic Nozzles into a Supersonic Crossflow , 2000 .

[66]  A. Roshko,et al.  Vortical structure in the wake of a transverse jet , 1994, Journal of Fluid Mechanics.

[67]  R. Srinivasan,et al.  Simulation of transverse gaseous injection through diamond ports into supersonic freestream , 2007 .

[68]  M. Lasky,et al.  A Unified Analysis of Gaseous Jet Penetration , 1971 .

[69]  Jack R. Edwards,et al.  Large-Eddy / Reynolds-Averaged Navier-Stokes Simulations of Scramjet Combustor Flow Fields , 2012 .

[70]  J. A. Schetz,et al.  Mixing studies of helium in air at high supersonic speeds , 1992 .

[71]  Campbell D. Carter,et al.  Mixing and combustion studies using cavity-based flameholders in a supersonic flow , 2004 .

[72]  M. Torrence.  Effect of injectant molecular weight on mixing of a normal jet in a Mach 4 airstream , 1971 .

[73]  James F. Driscoll,et al.  Visualization of flameholding mechanisms in a supersonic combustor using PLIF , 2007 .

[74]  Dietmar K. Hennecke,et al.  Mixing Zone Optimization of a Rich-Burn/Quick-Mix/Lean-Burn Combustor , 1999 .

[75]  Paul J. Waltrup,et al.  Liquid-fueled supersonic combustion ramjets - A research perspective , 1987 .

[76]  James F. Driscoll,et al.  Correlation and Analysis of Blowout Limits of Flames in High-Speed Airflows , 2005 .

[77]  A. Nejad,et al.  Breakup Processes of Liquid Jets in Subsonic Crossflows , 1996 .

[78]  J. Schetz.  Interaction Shock Shape for Transverse Injection in Supersonic Flow , 1970 .

[79]  C. Carter,et al.  Scalability of Ethylene Gaseous Jets for Fueling High-Speed Air-Breathing Combustors , 2009 .

[80]  M. G. Mungal,et al.  Simultaneous measurements of scalar and velocity field evolution in turbulent crossflowing jets , 2004, Journal of Fluid Mechanics.

[81]  Manfred Aigner,et al.  An Improved Lobed Strut Injector Concept for Supersonic Combustion , 2010 .

[82]  Robert A. Baurle,et al.  MODELING OF HIGH SPEED REACTING FLOWS: ESTABLISHED PRACTICES AND FUTURE CHALLENGES , 2004 .

[83]  Joseph A. Schetz,et al.  INTEGRATED CFD AND EXPERIMENTAL STUDIES OF COMPLEX INJECTORS IN SUPERSONIC FLOWS , 1998 .

[84]  Ann Karagozian,et al.  Transverse-jet shear-layer instabilities. Part 1. Experimental studies , 2007, Journal of Fluid Mechanics.

[85]  J. Morgenthaler.  Supersonic mixing of hydrogen and air , 1967 .

[86]  William H. Calhoon,et al.  Scalar Fluctuation Modeling for High-Speed Aeropropulsive Flows , 2007 .

[87]  M. M. Elkotb,et al.  Fuel atomization for spray modelling , 1982 .

[88]  Tobias Rossmann,et al.  Active Control of a Sonic Transverse Jet in Supersonic Cross-Flow Using a Powered Resonance Tube , 2005 .

[89]  A. Perry,et al.  An experimental study of round jets in cross-flow , 1996, Journal of Fluid Mechanics.

[90]  E. T. Curran,et al.  Scramjet Engines: The First Forty Years , 2001 .

[91]  Kuo-Cheng Lin,et al.  Structures of aerated-liquid jets in subsonic crossflows , 2001 .

[92]  David W. Bogdanoff,et al.  Advanced Injection and Mixing Techniques for Scramjet Combustors , 1994 .

[93]  F. Billig,et al.  Liquid JP-7 combustion in a scramjet combustor , 2000 .

[94]  G. J. Sturgess,et al.  Calculations of turbulent mass transport in a bluff-body diffusion-flame combustor , 1984 .

[95]  Raymond P. Fuller,et al.  Effects of Injection Angle on Atomization of Liquid Jets in Transverse Airflow , 2000 .

[96]  Tee Tai Lim,et al.  On the development of large-scale structures of a jet normal to a cross flow , 2001 .

[97]  C. Carter,et al.  Exploration of Aerated-Liquid Jets Using X-Ray Radiography , 2012 .

[98]  M. Mungal,et al.  Mixing, structure and scaling of the jet in crossflow , 1998, Journal of Fluid Mechanics.

[99]  N.-S. Liu,et al.  The development of a variable Schmidt number model for jet-in-crossflows using genetic algorithms , 1999 .

[100]  Kuo-Cheng Lin,et al.  Structures of Aerated-Liquid Jets in High-Speed Crossflows , 2002 .

[101]  C. E. Smith,et al.  Mixing of Multiple Jets With a Confined Subsonic Crossflow: Part I—Cylindrical Duct , 1997 .

[102]  C. Yates.  Liquid Injection into a Supersonic Stream , 1972 .

[103]  D. Dixon.  Structures of Angled Aerated-Liquid Jets in Mach 1.94 Supersonic Crossflow , 2012 .

[104]  Enhanced Ignition and Mixing of Kerosene Fuel in High - Speed Air Streams , 2005 .

[105]  Glenn S. Diskin,et al.  Effects of scale on supersonic combustor performance , 1987 .

[106]  Joseph Mathew,et al.  Improved Prediction of Plane Transverse Jets in Supersonic Crossflows , 2006 .

[107]  A. Karagozian,et al.  Evolution of Shear Layer Instabilities in the Transverse Jet , 2005 .

[108]  Adam Siebenhaar,et al.  Development and testing of the aerojet strutjet combustor , 1999 .

[109]  F. S. Billig,et al.  Penetration of gaseous jets injected into a supersonic stream. , 1966 .

[110]  A. Nejad,et al.  Spray structures of liquid fuel jets atomized in subsonic crossflows , 1998 .

[111]  Mikhael Gorokhovski,et al.  Modeling Primary Atomization , 2008 .

[112]  Campbell D. Carter,et al.  Flame Characteristics and Fuel Entrainment Inside a Cavity Flame Holder in a Scramjet Combustor (Postprint) , 2007 .

[113]  Wright-Patterson Afb,et al.  STRUCTURES OF WATER JETS IN A MACH 1.94 SUPERSONIC CROSSFLOW , 2004 .

[114]  G. Candler,et al.  Assessment of Synthetic Inflow Generation for Simulating Injection Into a Supersonic Crossflow , 2006 .

[115]  T. Rossmann,et al.  Super Sonic Mixing Enhancement by means of High Powered Jet Modulation , 2006 .

[116]  Melvin J. Bulman,et al.  The Rebirth of Round Hypersonic Propulsion , 2006 .

[117]  Kenneth J. Wilson,et al.  Subsonic and supersonic combustion using noncircular injectors , 1991 .

[118]  J. McGuirk,et al.  Effect of Tabs on Rectangular Jet Plume Development , 2009 .

[119]  Gerard M. Faeth,et al.  Primary Breakup of Turbulent Round Liquid Jets in Uniform Crossflows , 2007 .

[120]  Wright-Patterson Afb,et al.  X-Ray Study of Pure- and Aerated-Liquid Jets in a Quiescent Environment , 2009 .

[121]  K. Horn,et al.  Investigation of injectant properties on jet penetration in a supersonic stream , 1971 .

[122]  Heinz Pitsch,et al.  A spectrally refined interface approach for simulating multiphase flows , 2009, J. Comput. Phys..

[123]  J. Edwards,et al.  Continued Hybrid LES /RANS Simulation of a Hypersonic Dual-Mode Scramjet Combustor , 2013 .

[124]  Hassan Hassan,et al.  Modeling Scramjet Flows with Variable Turbulent Prandtl and Schmidt Numbers , 2006 .

[125]  Mo Samimy,et al.  AIAA-2002-0128 Development and Characterization of Hartmann Tube Based Fluidic Actuators for High Speed Flow Control , 2002 .

[126]  Jack R. Edwards,et al.  Simulations of High -Speed Internal Flows using LES/RANS Models , 2009 .

[127]  D. Collins,et al.  Stagnation Temperature and Molecular Weight Effects in Jet Interaction , 1970 .

[128]  Lester L. Yuan,et al.  Large-eddy simulations of a round jet in crossflow , 1999, Journal of Fluid Mechanics.

[129]  Joseph A. Schetz,et al.  Mixing of Transverse Jets and Wall Jets in Supersonic Flow , 1991 .

[130]  David S. Liscinsky,et al.  Mixing of Multiple Jets With a Confined Subsonic Crossflow: Part II—Opposed Rows of Orifices in Rectangular Ducts , 1999 .

[131]  W. Calhoon,et al.  HEAT RELEASE AND COMPRESSIBILITY EFFECTS ON PLANAR SHEAR LAYER DEVELOPMENT , 2003 .

[132]  J. Schetz,et al.  Effect of Injector Shape on Penetration and Spread of Liquid Jets , 1975 .

[133]  Joseph A. Schetz,et al.  Wave phenomena in liquid jet breakup in a supersonic crossflow , 1980 .

[134]  C. Hassa,et al.  Breakup and atomization of a kerosene jet in crossflow at elevated pressure , 2002 .

[135]  Edward E. Zukoski,et al.  Secondary injection of gases into a supersonic flow , 1964 .

[136]  A. Nejad,et al.  Spray Trajectories of Liquid Fuel Jets in Subsonic Crossflows , 2023, Proceedings of the Seventh International Conference on Liquid Atomization and Spray Systems.

[137]  D. W. Bahr,et al.  Technology for the design of high temperature rise combustors , 1985 .

[138]  Francine Battaglia,et al.  Direct Lagrangian Simulations of a Mixing Layer by the Transport-Element Method , 1993 .

[139]  C. Carter,et al.  SECONDARY BREAKUP OF AERATED LIQUID JETS IN SUBSONIC CROSSFLOW (POSTPRINT) , 2007 .

[140]  Luca Maddalena,et al.  Experimental and computational investigation of light-gas injectors in mach 4.0 crossflow , 2006 .

[141]  G. Faeth,et al.  Breakup of round nonturbulent liquid jets in gaseous crossflow , 2004 .

[142]  A. J. Reynolds.  The prediction of turbulent Prandtl and Schmidt numbers , 1975 .

[143]  Russell R. Boyce,et al.  Numerical investigation of transverse jets through multiport injector arrays in supersonic crossflow , 2008 .

[144]  C. R. Mcclinton,et al.  The effect of injection angle on the interaction between sonic secondary jets and a supersonic free stream , 1972 .

[145]  W. R. Hingst,et al.  Progress toward synergistic hypermixing nozzles , 1991 .

[146]  P. Rosin.  The Laws Governing the Fineness of Powdered Coal , 1933 .

[147]  James C. McDaniel,et al.  Experimental investigation of a supersonic swept ramp injector using laser-induced iodine fluorescence , 1994 .

[148]  R. Clayton Rogers,et al.  Experimental Supersonic Combustion Research at NASA Langley , 1998 .

[149]  Sadatake Tomioka,et al.  New Injector Geometry for Penetration Enhancement of Perpendicular Jet into Supersonic Flow , 2007 .

[150]  J. Schetz,et al.  An Experimental Investigation of Methods to Increase the Liquid Jet Penetration into Supersonic Flow. , 1978 .

[151]  J. Hermanson,et al.  Mie scattering imaging of a transverse, sonic jet in supersonic flow , 1993 .

[152]  Nancy Shimp,et al.  An innovative thermal management system for a Mach 4 to Mach 8 hypersonic scramjet engine , 1998 .

[153]  Shock/Boundary Layer Interaction Effects on Transverse Jets in Crossflow Over a Flat Plate , 2008 .

[154]  J. Schetz,et al.  Analysis of penetration and mixing of gas jets in supersonic cross flow , 1992 .

[155]  D. Taulbee,et al.  Study of turbulence on supersonic compression surfaces using Reynolds stress model , 1992 .

[156]  Campbell D. Carter,et al.  Injection of supercritical ethylene in nitrogen , 1995 .

[157]  Ronald K. Hanson,et al.  Time evolution and mixing characteristics of hydrogen and ethylene transverse jets in supersonic crossflows , 2006 .

[158]  Joseph A. Schetz,et al.  Improved Aerodynamic-Ramp Injector in Supersonic Flow , 2003 .