The electrical breakdown of thin dielectric elastomers: thermal effects

Dielectric elastomers are being developed for use in actuators, sensors and generators to be used in various applications, such as artificial eye lids, pressure sensors and human motion energy generators. In order to obtain maximum efficiency, the devices are operated at high electrical fields. This increases the likelihood for electrical breakdown significantly. Hence, for many applications the performance of the dielectric elastomers is limited by this risk of failure, which is triggered by several factors. Amongst others thermal effects may strongly influence the electrical breakdown strength. In this study, we model the electrothermal breakdown in thin PDMS based dielectric elastomers in order to evaluate the thermal mechanisms behind the electrical failures. The objective is to predict the operation range of PDMS based dielectric elastomers with respect to the temperature at given electric field. We performed numerical analysis with a quasi-steady state approximation to predict thermal runaway of dielectric elastomer films. We also studied experimentally the effect of temperature on dielectric properties of different PDMS dielectric elastomers. Different films with different percentages of silica and permittivity enhancing filler were selected for the measurements. From the modeling based on the fitting of experimental data, it is found that the electrothermal breakdown of the materials is strongly influenced by the increase in both dielectric permittivity and conductivity.

[1]  W. G. Chadband.  Electrical Degradation and Breakdown in Polymers , 1992 .

[2]  Jonas Gloeckner,et al.  Electrical Power Cable Engineering , 2016 .

[3]  William A. Thue,et al.  Electrical Power Cable Engineering, Third Edition , 2016 .

[4]  Anne Ladegaard Skov,et al.  Novel silicone elastomer formulations for DEAPs , 2013, Smart Structures.

[5]  Reinhard Schwödiauer,et al.  Stretch dependence of the electrical breakdown strength and dielectric constant of dielectric elastomers , 2013 .

[6]  T. Ghosh,et al.  Dielectric elastomers as next-generation polymeric actuators. , 2007, Soft matter.

[7]  C. P. Smyth,et al.  Dielectrics and Waves. , 1955 .

[8]  P.H.F. Morshuis,et al.  Synthesis and dielectric properties of epoxy based nanocomposites , 2009, 2009 IEEE Conference on Electrical Insulation and Dielectric Phenomena.

[9]  R. Hackam,et al.  Loss of hydrophobicity of high density polyethylene , 1997, IEEE 1997 Annual Report Conference on Electrical Insulation and Dielectric Phenomena.

[10]  H. Ragusch,et al.  Electrical breakdown in soft elastomers: Stiffness dependence in un-pre-stretched elastomers , 2010, 2010 10th IEEE International Conference on Solid Dielectrics.

[11]  Michael F. Ashby,et al.  The selection of mechanical actuators based on performance indices , 1997, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[12]  Sarah Bergbreiter,et al.  Dielectric breakdown of PDMS thin films , 2013 .

[13]  Wenbin Cao,et al.  Polydimethylsiloxane microfluidic chip with integrated microheater and thermal sensor. , 2009, Biomicrofluidics.

[14]  John C. Fothergill,et al.  Electrical degradation and breakdown in polymers , 1992 .

[15]  Steven A. Boggs,et al.  Computation of electro-thermal breakdown of polymer films , 2003, 2003 Annual Report Conference on Electrical Insulation and Dielectric Phenomena.

[16]  W. Marsden.  I and J , 2012 .

[17]  S. A. Studniarz,et al.  Dielectric breakdown in solids , 1977, Digest of Literature on Dielectrics, Volume 41, 1977.

[18]  L. Rosenhead.  Conduction of Heat in Solids , 1947, Nature.

[19]  T. Mezger,et al.  The Rheology Handbook: For users of rotational and oscillatory rheometers , 2020 .