Cellular buckling in stiffened plates

An analytical model based on variational principles for a thin-walled stiffened plate subjected to axial compression is presented. A system of nonlinear differential and integral equations is derived and solved using numerical continuation. The results show that the system is susceptible to highly unstable local–global mode interaction after an initial instability is triggered. Moreover, snap-backs in the response showing sequential destabilization and restabilization, known as cellular buckling or snaking, arise. The analytical model is compared with static finite element (FE) models for joint conditions between the stiffener and the main plate that have significant rotational restraint. However, it is known from previous studies that the behaviour, where the same joint is insignificantly restrained rotationally, is captured better by an analytical approach than by standard FE methods; the latter being unable to capture cellular buckling behaviour even though the phenomenon is clearly observed in laboratory experiments.

[1]  M. Wadee.  Localized buckling in sandwich struts with pre-existing delaminations and geometrical imperfections , 2002 .

[2]  M. Ahmer Wadee,et al.  Asymmetric Secondary Buckling in Monosymmetric Sandwich Struts , 2005 .

[3]  K. Rasmussen,et al.  Numerical Investigation of the Interaction of Local and Overall Buckling of Stainless Steel I-Columns , 2009 .

[4]  Giles W Hunt,et al.  Asymptotic and Rayleigh–Ritz routes to localized buckling solutions in an elastic instability problem , 1997, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[5]  Y. Kawazoe,et al.  Structure and Stability , 2005, Islamic and Christian Spain in the Early Middle Ages.

[6]  Mark A. Peletier,et al.  Cylindrical shell buckling: a characterization of localization and periodicity , 2003 .

[7]  Khosrow Ghavami,et al.  Numerical and experimental investigations on the compression behaviour of stiffened plates , 2006 .

[8]  C. Pearson.  General theory of elastic stability , 1956 .

[9]  Jurgen Becque,et al.  The interaction of local and overall buckling of cold-formed stainless steel columns. , 2008 .

[10]  E. Knobloch,et al.  Homoclinic snaking: structure and stability. , 2007, Chaos.

[11]  W. T. Koiter,et al.  An Alternative Approach to the Interaction between Local and Overall Buckling in Stiffened Panels , 1976 .

[12]  M. Lillico,et al.  Experiments on interactive buckling in optimized stiffened panels , 2001 .

[13]  M. Ahmer Wadee,et al.  Localization and mode interaction in sandwich structures , 1998, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[14]  M. Wadee,et al.  Kink band propagation in layered structures , 2005 .

[15]  Bernard Budiansky,et al.  Buckling of Structures , 1976 .

[16]  Giles W Hunt,et al.  A general theory of elastic stability , 1973 .

[17]  Kim J.R. Rasmussen,et al.  Experimental Investigation of the Interaction of Local and Overall Buckling of Stainless Steel I-Columns , 2009 .

[18]  M. Ahmer Wadee,et al.  Comparative studies of localized buckling in sandwich struts with different core bending models , 2010 .

[19]  E. Riks.  An incremental approach to the solution of snapping and buckling problems , 1979 .

[20]  M. Ahmer Wadee,et al.  Effects of periodic and localized imperfections on struts on nonlinear foundations and compression sandwich panels , 2000 .

[21]  G. W. Hunt,et al.  Cellular Buckling in Long Structures , 2000 .

[22]  Gilbert Y. Grondin,et al.  Stiffened steel plates under uniaxial compression , 2002 .

[23]  M. Ahmer Wadee,et al.  Cellular buckling in I-section struts , 2013, 1304.6294.

[24]  Leroy Gardner,et al.  Cellular buckling from mode interaction in I-beams under uniform bending , 2011, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[25]  B F Ronalds.  TORSIONAL BUCKLING AND TRIPPING STRENGTH OF SLENDER FLAT-BAR STIFFENERS IN STEEL PLATING. , 1989 .