Bonding integrity of hybrid 18Ni300-17-4 PH steel using the laser powder bed fusion process for the fabrication of plastic injection mould inserts

[1]  Z. Fan,et al.  Development of high strength Mg/Al bimetal by a novel ultrasonic vibration aided compound casting process , 2022, Journal of Materials Processing Technology.

[2]  S. Martínez,et al.  On the relationship between cutting forces and anisotropy features in the milling of LPBF Inconel 718 for near net shape parts , 2021, International Journal of Machine Tools and Manufacture.

[3]  Yuk Lun Chan,et al.  Evaluation of bonding integrity of hybrid-built AlSi10Mg-aluminium alloys parts using the powder bed fusion process , 2021 .

[4]  C. Ahrens,et al.  A new hybrid process combining machining and selective laser melting to manufacture an advanced concept of conformal cooling channels for plastic injection molds , 2021, The International Journal of Advanced Manufacturing Technology.

[5]  Bai Yuchao,et al.  Microstructure and machinability of selective laser melted high-strength maraging steel with heat treatment , 2021 .

[6]  Z. Fan,et al.  Microstructure, mechanical properties and corrosion resistance of A356 aluminum/AZ91D magnesium bimetal prepared by a compound casting combined with a novel Ni-Cu composite interlayer , 2021 .

[7]  Yuk Lun Chan,et al.  A machined substrate hybrid additive manufacturing strategy for injection moulding inserts , 2020 .

[8]  Kyeongsik Ha,et al.  Effect of Heat Treatment Condition on Microstructural and Mechanical Anisotropies of Selective Laser Melted Maraging 18Ni-300 Steel , 2020 .

[9]  M. Mohammadi,et al.  A trade-off between powder layer thickness and mechanical properties in additively manufactured maraging steels , 2020 .

[10]  L. Kučerová,et al.  Hybrid parts produced by deposition of 18Ni300 maraging steel via selective laser melting on forged and heat treated advanced high strength steel , 2020 .

[11]  R. Setchi,et al.  Effect of heat treatment on microstructure and mechanical behaviours of 18Ni-300 maraging steel manufactured by selective laser melting , 2019 .

[12]  H. Naffakh-Moosavy,et al.  Pulsed Nd:YAG laser welding of 17-4 PH stainless steel: Microstructure, mechanical properties, and weldability investigation , 2019, Optics & Laser Technology.

[13]  B. Abbès,et al.  Finite element cooling simulations of conformal cooling hybrid injection molding tools manufactured by selective laser melting , 2019, The International Journal of Advanced Manufacturing Technology.

[14]  Jun Yu Li,et al.  Additive manufacturing of maraging steel-H13 bimetals using laser powder bed fusion technique , 2019, Additive Manufacturing.

[15]  A. Phillion,et al.  Metallurgical and mechanical assessment of hybrid additively-manufactured maraging tool steels via selective laser melting , 2019, Additive Manufacturing.

[16]  G. Berger,et al.  Efficient cooling of hot spots in injection molding. A biomimetic cooling channel versus a heat-conductive mold material and a heat conductive plastics , 2019, Polymer Engineering & Science.

[17]  Z. Fan,et al.  New Insights into the Characterization and Formation of the Interface of A356/AZ91D Bimetallic Composites Fabricated by Compound Casting , 2018, Metallurgical and Materials Transactions A.

[18]  Luís M. N. B. F. Santos,et al.  Fracture Toughness of Hybrid Components with Selective Laser Melting 18Ni300 Steel Parts , 2018, Applied Sciences.

[19]  Mukul Shukla,et al.  Effect of laser scanning strategies on texture, physical and mechanical properties of laser sintered maraging steel , 2018, Materials Science and Engineering: A.

[20]  H. Asgari,et al.  Fracture behaviour of additively manufactured MS1-H13 hybrid hard steels , 2018 .

[21]  Min Liu,et al.  Microstructural evolution, nanoprecipitation behavior and mechanical properties of selective laser melted high-performance grade 300 maraging steel , 2017 .

[22]  M. Brandt,et al.  Numerical and experimental evaluation of a conformally cooled H13 steel injection mould manufactured with selective laser melting , 2017, The International Journal of Advanced Manufacturing Technology.

[23]  Aitzol Lamikiz,et al.  Analysis of the regimes in the scanner-based laser hardening process , 2017 .

[24]  Taku Yamazaki,et al.  Development of A Hybrid Multi-tasking Machine Tool: Integration of Additive Manufacturing Technology with CNC Machining , 2016 .

[25]  Charles Carson.  Heat Treating of Maraging Steels , 2014 .

[26]  Jean-Pierre Kruth,et al.  Microstructure and mechanical properties of maraging steel 300 after Selective Laser Melting , 2010 .

[27]  D. Kazmer.  Injection Mold Design Engineering , 2007 .

[28]  Jong Hoon Lee,et al.  Study on the Microstructure and Mechanical Properties of 17-4 PH Stainless Steel Depending on Heat Treatment and Aging Time , 2006 .

[29]  J. Yang,et al.  Aging reactions in a 17-4 PH stainless steel , 2002 .

[30]  Y. Katayama,et al.  Microstructural evolution in a 17-4 PH stainless steel after aging at 400 °C , 1999 .

[31]  R. Krishnan,et al.  Effects of aging on the microstructure of 17-4 PH stainless steel , 1988 .

[32]  D. Kalish,et al.  The strength, fracture toughness, and low cycle fatigue behavior of 17-4 PH stainless steel , 1974, Metallurgical and Materials Transactions B.